1 / 12

三新電気香港有限公司

三新電気香港有限公司. SANSHIN DENKI HK CO., LTD. Technical Information. Difference of production method Characteristic of our product Others. SANSHIN DENKI HK CO.,LTD. XENON FLASH TUBE. SANSHIN DENKI HK CO.,LTD. SPEC COMPARISON. Excellent. About 10. Min.2mm. SANSHIN DENKI HK CO.,LTD.

lyn
Download Presentation

三新電気香港有限公司

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 三新電気香港有限公司 SANSHIN DENKI HK CO., LTD

  2. Technical Information Difference of production method Characteristic of our product Others SANSHIN DENKI HK CO.,LTD

  3. XENON FLASH TUBE SANSHIN DENKI HK CO.,LTD

  4. SPEC COMPARISON Excellent About 10 Min.2mm SANSHIN DENKI HK CO.,LTD

  5. CHEMBERMETHOD Company P, Company W At the time of putting air pressure into xenon tubes, about 30pcs of XE tubes are put into a pot at the same time. It is sealed by heater at the same time. SANSHIN DENKI HK CO.,LTD

  6. CHEMBER METHODMERITS/DEMERITS MERITS : ＊The outputs produced at the same time are large ＊xenon tube at required color temp is low DEMERITS : ＊There is much dispersion ＊Only 2.5 atmospheric pressure can not put inside the pot. SANSHIN DENKI HK CO.,LTD

  7. INDEX METHOD（新光和） • Produced one by one • When xenon tube is sealed, it is done by burner. And then they are dipped into the Liquid Nitrogen to cool it down at the moment. SANSHIN DENKI HK CO.,LTD

  8. SANSHIN DENKI HK CO.,LTD Tungsten expands, glass shrinks. ↓ ＊Slow leakage of Gas is hard to cause. ＊High Pressurization of the enclosure gas is easily possible. THAT MEANS YOU CAN GET MORE FLASHING LIGHT POWER!

  9. CHARACTERISTICS • 1. Compression seal by the combination of the hard glass and the tungsten electrode is adopted. • NO CHANGE OF THE SEAL(経時変化無） • RESISTANT TO THERMAL SHOCK(熱衝撃強） • 2.The high-performance cathode sintering(高性能陰極焼結体). • TRIGGER POINT BECOMES STABLE • LITTLE DEFORMATION OF TRIGGER WAVE FORM • NOISE IS HARD TO CAUSE • TRIGGER LEAKAGE IS HARD TO CAUSE SANSHIN DENKI HK CO.,LTD

  10. CHARACTERISTICS • 3. There are a few drifts caused by the life deterioration. 4. High pressurization of the enclosure gas is easily possible. 5. Nesa-coat of the high heat-resistance is used. SANSHIN DENKI HK CO.,LTD

  11. PRODUCTION CAPACITY SANSHIN DENKI HK CO.,LTD

  12. PRESENT PRODUCTION QUANTITY SANSHIN DENKI HK CO.,LTD

More Related