1 / 28

Market introduction CellaTemp PA

Market introduction CellaTemp PA. CellaTemp PA – Technical news. Newest interface technology Latest high-resolution microprocessors Newest sensors New amplifier technology Improved optical properties Improved thermal shock behaviour (PA 10). CellaTemp PA – Special features.

lynn-holman
Download Presentation

Market introduction CellaTemp PA

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Market introduction CellaTemp PA

  2. CellaTemp PA – Technical news • Newest interface technology • Latest high-resolution microprocessors • Newest sensors • New amplifier technology • Improved optical properties • Improved thermal shock behaviour (PA 10)

  3. CellaTemp PA – Special features • Cylinder-shaped housing with M65 screw thread for very easy mounting • hight-quality stainless steel housing • Bright LED display on the back side (USP) • Connector on the back side • 2 current output signal freely configurable in many ways one of these output can be configured as an analog control voltage input (USP) • 2 gate inputs/outputs can be freely custom-configured

  4. CellaTemp PA – Special features • Spot Sighting options alternatively: • a) through-the-lens - mirror-inverted • b) integrated laser spot light • c) integrated high dynamic video camera • Integrated USB interface 57600 bit/s • RS 485 interface for point-to-point or multidrop network • in the developmentNew configuration software „CellaView“usable for parallel operation of up to 30 pyroemters • Complete configuration via keypad or PC • Multifunctional configuration possibilities

  5. CellaTemp PA- Configuration options (1) • Current output 0(4) – 20 mA • Beginning and end of measuring range • Smoothing function • Data storage mode • Emissivity / emissivity ratio setting • Interface selection • Dirty optics detection in the two-colour pyrometer PA 40

  6. CellaTemp PA – Configuration options (2) • Sensor output curve correction at 10 data points • Sight glass transmittance setting • Compensation for extraneous radiation (PA 10/13) • Automatic emissivity determination (PA 40) • Automatic temperature detection in discontinuous processes • On-site user calibration • Sequence average value - peak value selectable • Laser can be switched on / off

  7. CellaTemp PA – Special features • Control voltage input to offset interfering factors such as extraneous radiation. • Extremely wide measuring ranges • High resolution temperature detection 0.2 K + 0.03 % of the adjusted measuring range • Electronic dirty window check PA 40 • Test current to perform diagnostics • polarising filter protects the eye against bright target objects (optional accessory)

  8. Configuration of the analogue outputs and inputs

  9. Configuration of the input and output swichtes

  10. PA Connector Pin Assignment

  11. Features of the interfaces • Both USB and RS485 interface usable at the same time • Employs either RS485 interface for point-to-point communication or USB interface • Integrated software for sensor configuration and data communication. Runs under all common operating systems, executable in any language. • Parameter settings can be adjusted during running operations

  12. Optical Features • Focusable interchangeable lenses • High optical resolution due to multiple-element lenses • Consistently good imaging properties throughout the entire focusing range • Corrected for the infrared and visible spectrum • Large, high-contrast field of viewe.g. 42 ° when used with the wide-angle lens • Minimize Size-of-source effect (make CellaTemp PA less sensitive to fluctuating target size or measuring distance)

  13. Optical Features • Distance range is infinitely adjustable and precise thanks to screw thread • Adaptable to supplementary lenses using camera thread • Target size diameter as small as Ø 0.3 mm • Eyepiece also suitable for users who wear glasses due to broadened intrapupillary distance • By using supplementary lenses a myriad numbers of optical solutions are possible

  14. Viewing options • Through-the-lens sighting tube with target marker • Laser spot indicator • Video camera

  15. CellaTemp PA with video camera

  16. Sensor and Signal Processing • Wide measuring ranges • Consistently high resolution throughout the measuring range • Low quantisation noise, even at the lower end of the measuring range

  17. Type overview (1) – One colour compact pyrometer

  18. Type overview (2) – Two colour compact pyrometer

  19. Type overview (3) – One colour fibre optic pyrometer

  20. Type overview (4) – Two colour fibre optic pyrometer

  21. Pyrometer CellaTemp PA 83 with rectangular measuring area

  22. CellaTemp PA with fibre optic cable

  23. CellaTemp PA – Accessories • Compatible with entire range of CellaTemp PZ accessories • Mounting bracket PA 11/U • Pivoting / tilting pedestal mount PA 11/K • Protective supplementary quartz lens PA 20/I • Protective supplementary ZnS lens PA 10/I • Protective supplementary sapphire lens PA 15/I • Cooling jacket PA 20/B, PA 20/M • Polarizing filter for eyepiece PA 20/P • Connection cable VK 02/A • USB cable VK 11/D

  24. CellaTemp PA – delivery includes • Pyrometer • Connecting cable VK 02/A • manual German, Englisch, French depending on order) • USB cable VK 11/D • Software CellaMevis PZ 10/N AF 10_d_e • Type with video camera:video cable VK 02/F incl. adapter to cinch

  25. CellaTemp PA – cooling housing PA 20/… open: PA 20/B AF 1 closed: PA 20/M AF 1 For pyrometers with throught-the-lens optic or laser spot marker closed: PA 20/M AF 2 für pyrometer with video camera

  26. CellaTemp PA – protective housing PA 40/… open: PA 40/B AF 1 closed: PA 40/M AF 1 For pyrometers with throught-the-lens optic or laser spot marker closed: PA 40/M AF 2 für pyrometer with video camera

  27. Mounting set PA 20-011 for cooling and protective housing

  28. Mounting set PA 20-013 for cooling and protective housing

More Related