1 / 9

Integration

Integration. Bacnet Server HDL-BN-4096. Introduction. HDL-BN-4096, only need to use the special firmware to upgrade the SB-DN-1IP or HDL-MBUS01IP.431. It builds in the bacnet protocol, allows BA and BMS system to monitor and control HDL system, like lighting, HVAC, floor heating, etc.

lzabel
Download Presentation

Integration

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Integration Bacnet Server HDL-BN-4096

  2. Introduction HDL-BN-4096, only need to use the special firmware to upgrade the SB-DN-1IP or HDL-MBUS01IP.431. It builds in the bacnet protocol, allows BA and BMS system to monitor and control HDL system, like lighting, HVAC, floor heating, etc. Note: HDL devices should be configured by HDL buspro software when controlled by Bacnet System. Open the HDL buspro software, search and set parameters of the HDL-BN-4096 And HDL can also control Bacnet AC system. You can refer to another PPT (Integration_AC System)

  3. System connection

  4. Basic Information The Bacnet server default IP is 192.168.10.252.

  5. Configuration 1.Bacnet has different type: AI, AO, AV, BI, BO,BV, MI, MO, MV, Other. Different type can control different targets. 2. The Bacnet ID is generated automatically according to the Bacnet ID type and ID value. 3. Type of control target. It is the HDL control type. 4. ID of HDL devices

  6. Bacnet Objects AI: Analog Input AO: Analog Output AV: Analog Value, used to define start-stop commands of devices BI: Digital Input (Binary Input) BO: Digital Output (Binary Output) BV: Digital Output (Binary Value), used to define start-stop commands of devices MI: Multi State Input MO: Multi State Output MV: Multi State Value

  7. Application Control the CH3 of HDL dimmer： Setting in HDL Buspro software

  8. Application Setting in Bacnet Explorer PS: Type 100: it means turn on the channel 0:it means turn off the channel

More Related