300 likes | 411 Views
2006 DOE Hydrogen Program Review Presentation Template (replace with your title). Name Organization Date. Project ID # (this will be provided to you). This presentation does not contain any proprietary or confidential information.
E N D
2006 DOE Hydrogen Program Review Presentation Template (replace with your title) Name Organization Date Project ID # (this will be provided to you) This presentation does not contain any proprietary or confidential information
Guidelines for number of slides(Not a template slide – for information purposes only) Most oral presenters this year will be allotted 30 minutes – 20 minutes for the prepared presentation and 10 minutes for questions. Thus, presentations should contain maximum of 15 to 20 slides. Except for the time/number of slides requirements, this template applies to poster presentations as well as oral presentations. Note: 70% of your presentation/discussion should be devoted to Technical Accomplishments and Future Work
Project start date Project end date Percent complete Barriers addressed (List up to 3 technical barriers and technical targets from the HFCIT Program Multi-Year Program Plan addressed by your project (If you do not have them, go to www.eere.energy.gov/hydrogenandfuelcells/mypp to obtain them)) Overview Barriers Timeline Budget • Total project funding • DOE share • Contractor share • Funding received in FY05 • Funding for FY06 Partners • Interactions/ collaborations (View Notes page for additional information)
Objectives • Describe the objective of your project and what you were to achieve for the work covered by your presentation, i.e., the objective of your work over the past year • Your objectives should make it clear what the relevance of your project is to the Hydrogen Program (View Notes page for additional information)
Approach • Describe overall technical approach using one slide • Emphasize unique aspects of approach and de-emphasize discussion of equipment used • Use simple statements so that scientists and engineers not expert in your area can readily understand the explanation of your approach (View Notes page for additional information)
Technical Accomplishments/ Progress/Results • Describe the most important technical accomplishments achieved during this reporting period and their significance (from last year’s review to date for existing projects, or progress to date for new projects) • Relate the accomplishments to project milestones and objectives • Benchmark the progress versus FY05 results, if applicable • Benchmark the accomplishments against the technical targets (if applicable) (View Notes page for additional information)
Accomplishments/Progress/ Results Slides • Include sufficient slides to explain what was done leading to the technical accomplishments • Please limit your slides to the time you have available – you will not be allowed to go over your allotted time
Accomplishments Slides (con’t) • To assist the reviewers evaluating your work, please include bullet comments of the key points on each slide • Though your presentation will be in color, it is best to choose colors and data symbols so that they can be easily distinguished in black and white for those reviewers with hardcopies
Future Work • Explain what it is you plan to do during the rest of this year FY06 and next year FY07 • Highlight upcoming key milestones • Address how you will deal with any decision points during that time and any remaining issues (View Notes page for additional information)
Summary • Summarize the key points you wish the audience and Reviewers to take away from your presentation • For those projects that are working towards specific technical targets, include a table summarizing key FY06 technical results compared to FY05 results, and the technical targets (see example slide)
Back-up Slides (Not a template slide – for information purposes only) • The following slides are to be included in your submission but not as part of your main presentation for evaluation purposes – you may refer to them during the Q&A period if they are helpful to you in explaining certain points.
Responses to Previous Year Reviewers’ Comments • If yours is an on-going project that was reviewed last year, address 1-3 significant questions/criticisms from the previous year’s reviewers’ comments (View Notes page for additional information)
Publications and Presentations Please list any publications and presentations that have resulted from work on this project. Use at least 12 point font. This slide is for the purposes of the reviewers only – it is not to be presented as part of your oral or poster presentation. They will be included in the hardcopies of your presentation that might be made for review purposes.
Example Publication List Publications • K. Sasaki, J. X. Wang, M. Balasubramanian, J. McBreen, F. Uribe, R. R. Adzic, Ultra-low platinum content fuel cell anode electrocatalyst with a long-term performance stability; Electrochim. Acta, 49, 3873(2004). • K. Sasaki, M. Vukmirovic, F. Uribe and R. Adzic, Ultra-low Pt Loadings Electrocatalysts forH2/Co and Metahanol Oxidation. 206th Meeting of The Electrochemical Society. Hawaii, Oct. 2004. Abstract No.1502. • F. A. Uribe, T. Rockward, J. A. Valerio and R. R. Adzic, “Performance of PEMFC Electrodes Containing Low-Pt Loadings”. 206th Meeting of The Electrochemical Society. Hawaii, Oct. 2004. Abstract No. 1857.
Critical Assumptions and Issues • Address 3-5 of the critical assumptions and/or problems affecting the outcome of your project. Briefly describe the problem as well as potential solutions, both within and beyond the scope of the project.
Final Instructions(Not a template slide – for information purposes only)
Preparation Instructions(Not a template slide – for information purposes only) • Do not include any proprietary or confidential information. • Please do not use dark backgrounds as this causes difficulties when printing hardcopies for review purposes. • Do not incorporate animation or special effects since all presentations will be saved as PDF files for presentation and for posting on the web.
Preparation Instructions (con’t)(Not a template slide – for information purposes only) • If you have movie clips to show as part of your presentation, contact Rich Bechtold to arrange (see last slide). • Poster presentations should use these instructions so that the reviewers have a common basis of comparison to the oral presentations – just bring print-outs of your slides to put on poster boards.
Preparation Instructions (con’t)(Not a template slide – for information purposes only) • Please name your electronic PowerPoint presentation file as follows: Project ID# Last Name Example: ST14 Smith
Questions?(Not a template slide – for information purposes only) • Contact: Rich Bechtold at 443-812-3921 rlbechtold@alliance-technicalservices.com • or Melissa Lott at 301-313-0429 mjlott@alliance-technicalservices.com