1 / 7

FAULT MESSAGES:-

FAULT MESSAGES:-. FAULT MESSAGES. FAULT MESSAGES – Inverter AC. Connector 04 ( C5 Error In VPS ). WAC Control PCB. SMD in series with Room sensor signal. WAC Power PCB. Relays Can Damage Due To:- 1 Short Circuit in wiring 2 Wrong Wiring

mada
Download Presentation

FAULT MESSAGES:-

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. FAULT MESSAGES:-

  2. FAULT MESSAGES

  3. FAULT MESSAGES – Inverter AC

  4. Connector 04 ( C5 Error In VPS )

  5. WAC Control PCB SMD in series with Room sensor signal.

  6. WAC Power PCB Relays Can Damage Due To:- 1 Short Circuit in wiring 2 Wrong Wiring 3 Loose connections at Terminals ( Sparking ) VDR 10K561 ( Over-Voltage protector )

  7. F6 Or H6 Error in SAC Motor Feedback connector ( 3 Pin) Includes Vcc, Feedback & Gnd. ( Check 5V between Vcc & Gnd ) • Can Be Due to:- • Motor Wires Cut • Feedback wires cut • Motor Jam ( Feedback signal not received) • Track Burn on PCB ( Feedback not reach to MICON • Faulty Connector of Feedback.

More Related