1 / 6

Sweeping Component Values in PSpice Simulations

Sweeping Component Values in PSpice Simulations. ENGR 311. Double-click on the component value. Set the value to {R_val}. Place the part PARAM and double-click it to get to the options. Set NAME1 to R_val (w/o { }) and give it a default value for VALUE1 (1k in this case).

mahala
Download Presentation

Sweeping Component Values in PSpice Simulations

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Sweeping Component Values in PSpice Simulations ENGR 311

  2. Double-click on the component value Set the value to {R_val}

  3. Place the part PARAM and double-click it to get to the options. Set NAME1 to R_val (w/o { }) and give it a default value for VALUE1 (1k in this case)

  4. In Analysis Setup: click Parametric… then change the Swept Var Type to Global Parameter, Name to R_val, and Sweep Type to Linear. Then set the Start Value, End Value, and the amount to Increment by.

  5. Next setup the desired analysis method for your simulation, in this case it is Transient. Run the simulation, and you get…

  6. Display all available sections, and PSpice displays the output for the transient analysis on the circuit with each value of R_val.

More Related