1 / 20

Laser Speckle Extensometer ME 53

Laser Speckle Extensometer ME 53. Class 1 Device. Version 2.3. © MESSPHYSIK Materials Testing. Features:. Non-contacting measurement. Works with most materials. High temperature measurement. Micro Tensile Specimen measurement. 1 Laser diodes. 2 Cameras (CCD). 3 Speckle Patterns.

mahola
Download Presentation

Laser Speckle Extensometer ME 53

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Laser Speckle ExtensometerME 53 Class 1 Device Version 2.3 © MESSPHYSIK Materials Testing

  2. Features: Non-contacting measurement Works with most materials High temperature measurement Micro Tensile Specimen measurement 1 Laser diodes 2 Cameras (CCD) 3 Speckle Patterns 4 Specimen

  3. Principles of Displacement Measurement with Laser Speckle Correlation The optically rough surface of a specimen reflects coherent light. Laser diode modules with a wave length of λ = 660 nm are directed towards the specimen. The reflected light passing through the laser beam creates so-called „Speckle Patterns“. The image size of the CCD camera is called „Field of View“. Speckle = spot, dab or point Speckle Pattern Image Size = Field of View (FOV)

  4. Principles of Displacement Measurement with Laser Speckle Correlation Requirements for displacement measurement with standard application: 2 Cameras = 2 Speckle Patterns Distance between cameras = 50mm Lenses … 75f x2 / 3,9 F with 2x extender we receive f=150mm With these lenses a distance of 480 mm between specimen and cameras is possible

  5. Principles of Laser Speckle Correlation While cameras and laser modules remain in a fixed position, the surface of the specimen moves when extended. Master Slave To measure the displacement of the surface, it‘s necessary to follow the movements of the Speckle Patterns. This is achieved by means of a cross-correlation algorithm comparing two successive patterns. This comparison is carried out up to twenty times per second. Measuring rate = 20 Hz

  6. The Speckle Pattern The size of the evaluated patterns can be set to up to 128x128 pixels. The cross-correlation (FFT) requires high computing capacity. Therefore PCs with a minimum CPU speed of 500 MHz are needed to reach measuring rates of 20 Hz. In order to measure up to 200Hz a 3 GHz Processor and High Speed Digital Cameras are required.

  7. The Correlation Peak The result of the cross-correlation is a function, where the position of the maximum (Correlation Peak) corresponds with the displacement of the pattern. A special interpolation algorithm determines the position of the correlation peak in the subpixel range and compensates for changes of the surface in real-time. Parameters for this interpolation algorithm can be defined by the user.

  8. The peak is intersected by several planes parallel to the xy – plane. The results are sectional planes which are evaluated in two dimensions. The centres of gravity are regarded as the position of the peak. S With this procedure it is possible to reach a very accurate displacement measurements while saving a lot of calculation time.

  9. Calibration Calibrating the LSE, the Speckle pattern must be moved for a defined stretch. This way the size of the FOVs (Field of Views) and the Calibration factors can be determined. This stretch can be as long as needed and adjusted in the LSE Software. The standard stretch for the calibration is 2 mm. The sample is mounted in one grip only and shifted for exactly 2 mm. The size of the FOVs is calculated, the result saved and the LSE is ready for measuring. If the distance between specimen and camera has changed, the LSE has to be re-calibrated.

  10. Features • 2 - dimensional strain measurement (longitudinal and transversal)

  11. Features Features • Displacement & 3 Point – Deflection Measurement

  12. Features Features Triangulation Sensor Head ME53-33 This application turning the cameras allows L0 setups from 0-250mm

  13. Features Features Triangulation Sensor Head ME53-33 applied to a Midi 10-20 Machine Two dimensional strain, multiple strain and deflection measurement Testing all kind of materials: Metals Plastics Textiles Rubbers

  14. Features Features Works with most materials Steel Aloy Rubber Plastics

  15. Features Features • 800° C high temperature measurement done in Australia, University of Technology in Brisbane

  16. Features Features • compression test of all kind of material • compression tests at high temperatures up to 1600 °C

  17. Features Features Laser Speckle Extensometer looking through temperature chamber glas window illuminated specimen

  18. Features Features • 0.1 µm resolution measurement of micro specimen • Calibration by marks on the surface of the specimen

  19. Features Features Micro Specimen curve

  20. Credits Phillip Winkelmayer Dipl. Ing. Oliver Spinka © Messphysik Materials Testing, Oktober 2005

More Related