1 / 14

Lars Holm, Sales Director , Flexo W ash By Lars Holm, Sales Director , Flexo Wash

Anilox Rolls and Plates - Keep them Clean !. Lars Holm, Sales Director , Flexo W ash By Lars Holm, Sales Director , Flexo Wash. Flexo Wash. Based in Aarhus, Denmark Flexo Wash UK in Leeds Office, service, consumables stock Demo van Narrow Web Sales by PGM, Claus Nielsen.

mairi
Download Presentation

Lars Holm, Sales Director , Flexo W ash By Lars Holm, Sales Director , Flexo Wash

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Anilox Rolls and Plates -KeepthemClean! Lars Holm, Sales Director, Flexo Wash By Lars Holm, Sales Director, Flexo Wash

  2. Flexo Wash • Based in Aarhus, Denmark • Flexo Wash UK in Leeds • Office, service, consumablesstock • Demo van • Narrow Web Sales by PGM, Claus Nielsen

  3. The Anilox Roll “THE HEART OF THE FLEXO PROCESS!” Periodic maintenance and care of the anilox is critical to the converters’ survival !

  4. Plugged Anilox Rolls Cause: • Inadequate ink distribution • Poor color densities • Difficulties matching color • Wasted: time, ink, substrate

  5. Dirty / DamagedPlatescause • Poor print Quality • Remaking of plates • Wasted: time, ink, substrateplates

  6. KEEP CLEAN! • Before – “Reactive”: • Deep clean the anilox when it no longer performs. • Today – “Proactive”: • Clean rolls after each job run • Clean rolls on a regular maintenance schedule • Clean rolls immediately after removal from the press & before storage • Keep new rolls clean from day #1

  7. WHY IS CLEANING IMPORTANT NOW? THERE ARE TWO (2) IMPORTANT REASONS !

  8. 1. Management Challenges: • PRESSURES AND DEMANDS FROM CUSTOMERS AND PRINT COMPETITION: • Shorter job runs • Shorter lead times • More changeover • New technologies – Digital • Lean manufacturing pressures • Pricing pressures from customers • Quality demands - zero defects and waste

  9. 2. Technology Challenges: • Deeper, smaller cells can exasperate plugging issues. • HD printingplatesare more fragile and difficult to clean. • High density cells per inch with 2 micron cell walls make anilox more fragile & susceptible to damage • Pads, abrasive cleaners, brushes etc. are losing their effectiveness and causing damage in the smaller, deeper cells and plates. Improper handling - Doctor blade scoring & POOR CLEANING METHODS!

  10. Return On Investment How muchmoney do youspend on: =ROI in lessthan One Year! • Labour time on manual washing, rinsing, drying? • Downtime because of dirtyaniloxes / platescausingincosistent print quality? • Wastedink and materialbecause of dirtyaniloxes / platescausingincosistentprint quality? • New plates and aniloxesbecause of damage by manual washing/handling?

  11. Before Choosing a Cleaning Method: Is it: • Easy to use? • Safe? • Gentle on the anilox and plate? • Effective? • Quick? • 100% automatic?

  12. Using Flexo Wash Anilox Cleaning Systems • No wear and tear on the rollers (Only liquid, water and air) • Fully automatic (wash, rinse, dry - no manual labour required) • Easy-to-use (Place the rolls, close lid and press start) • Cost-efficient process (EUR 1 per roll) • Quick cleaning process (10-15 minutes full cycle) • A daily tool for roll cleaning

  13. Using Flexo Wash Plate Wash Systems • No wear and tear on the plates(liquid, soft brushes, water and air) • Fully automatic (wash, rinse, dry - no manual labour required) • Easy-to-use (Place the plates from print job on belt and collect them in tray afterwards) • Cost-efficient process (EUR 0,2-0,3 per plate meter) • Quick cleaning process (3 minutes per plate meter) • Standard application for 1,14 – 1,7mm. plates

  14. Thankyou!

More Related