320 likes | 417 Views
Lesson 11-Locating, Printing, and Archiving User Files. Overview. Creating a long file. Splitting long files. Locating files with find. Printing a file. Archiving files. Creating a Long File. The “ls –R ~” command is used to list all the files contained in the user’s home directory.
E N D
Overview • Creating a long file. • Splitting long files. • Locating files with find. • Printing a file. • Archiving files.
Creating a Long File • The “ls –R ~” command is used to list all the files contained in the user’s home directory. • The “cut –c range of characters ~/file name” command is used to read a particular number of characters from each line in a file. • The “cat –n file name” command is used to add numbers to the left of all lines in a copy of the file.
Splitting Long Files • The “split” utility is used to read a long file and break up the contents into a series of small files of specified size. • Each small file has an extension starting with “aa” and going through the alphabet as far as needed to hold a copy of the whole file.
Splitting Long Files Splitting Long Files into Pieces
Splitting Long Files Reassembling the files: • The “cat filename*” command is used to read all the small files and output data that matches the original long file. • The last part of the file names, such as “aa”, “ab”, etc., is in ASCII order. • The ASCII order is used by the shell for the filenames when it replaces the * in the command line.
Locating File with Find • The “find” utility is used to locate a particular file in several directories. • The find utility displays the output and any error message that is appropriate. • The pathnames of files and information about directories that cannot be examined because of their assigned permissions are also displayed by the find utility.
Locating File with Find • The command to be given is “find ~ -name filename –print”. • The “~” specifies the target starting point directory. • The “–print” specifies that the full pathname of each occurrence of the file(s) matching the selection criterion should be output to the screen.
Locating File with Find • Locating files by owner. • Locating and acting on files by owner. • Locating additional options. • Acting on all files in a directory tree.
Locating Files by Owner • The “ls –ld /directory name/$USER” command is used to determine if the user has a directory with the same name as the login name in a particular directory. • The “find” utility can also be used to identify files owned by a particular user. • The output of the find utility can be redirected to a file or a printer.
Locating Files by Owner Command Line Interpretation find Utility
Locating and Acting on Files by Owner • The find utility can also be used to remove located files, change file permissions, or employ any shell file-manipulation command. • The “-exec” option is used with the utility to execute any command utilizing the file names that are selected.
Locating and Acting on Files by Owner Using the find Utility to Locate Files by Owner
Locating Additional Options Additional Options
Acting on all Files in a Directory Tree • The find utility can be used as an agent to go through the directory tree recursively and execute another utility on all files. • The utility shows a user to search through the specified directory trees, based on a variety of criteria, and perform actions on the located files.
Printing a File • Printing the output of a pipeline. • Printing multiple copies. • Adding a title line to the banner page. • Checking the status of print jobs. • Canceling a print request.
Printing the Output of a Pipeline • A pipe can be used to connect the output of a utility as an input to the print utility. • The “col –bx” and the “colcrt” utilities are used to remove control characters that are of value to the terminal.
Printing Multiple Copies Any of the following commands can be used to print multiple copies of a file: • lp –n (number of copies to be printed in numeric value) file name. • lpr -# (number of copies to be printed in numeric value) file name.
Adding a Title Line to the Banner Page • A banner page, also called the burst page, contains information about the printer and the user issuing the print request. • The “lp –t‘numbers file’ file name” or the “lpr –Pprinter –J’numbers file’ file name” command can be used to add a title and print the file.
Adding a Title Line to the Banner Page • The “lp –dprinter –ttitle filename” or the “lpr –Pprinter –J’title’ filename” are the two formats of the print commands.
Checking the Status of Print Jobs • All print requests are administered by a spooler. • A spooler is a program that receives print requests from multiple users and sends jobs one at a time to the printer. • The spooler makes it possible for the system to process simultaneous print job requests for several users. • The “lpstat” or the “lpq –Pprinter username” command can be use to examine the queue.
Canceling a Print Request • The “cancel” or the “lprm” command can be used to remove jobs from the queue. • On a Linux system, all printing jobs owned by the user are removed from the queue. • On a UNIX system, the “–u” option is used to indicate jobs owned by the user.
Archiving Files • Archiving files on floppy disks. • Creating archives with tar.
Archiving Files on Floppy Disks Copying a file to and from a floppy: • Mtools is a set of programs that facilitate the copying of files to a floppy drive without going through the process of mounting the drive. • The “mcopy” command is used to copy a file to and from a floppy. • The command requires two arguments the file name from the current directory, and a:, which is an agreed name for the floppy.
Archiving Files on Floppy Disks Copying a file to and from a floppy (continued): • Multiple files can be copied by using the * sign in place of a particular filename. • Attributes such as permissions are not included in the copy. • When a file is copied from a floppy, the permissions for the newly copied file may not match its original permissions. • When the mcopy command creates a new file on the system, the default permissions for the new file are applied.
Archiving Files on Floppy Disks Removing files and directories from a floppy: • The “mdel” command is used to delete files. • The mdel command requires an argument, the name of the file(s) to be deleted. • The “mdeltree” command is used to delete directories. • This command requires one argument, the name of the directory to be deleted.
Archiving Files on Floppy Disks Formatting a floppy disk: • The “mformat” command is used to format a floppy. • The floppy is formatted in the DOS format.
Creating Archives with tar • The “tar” (tape archiving) utility is used extensively for making archive files on most systems. • The utility can be used to create a single file, called archive, which contains the files in a directory tree and all information about each file.
Creating Archives with tar • The command used to create a tar archive is “tar –cvf filename.tar”. • The command instructs tar to create an archive in verbose mode and use a file to hold the archive. • The dot (.) is the source directory, from which all files are archived. • The “tar –tf filename” can be used to list the contents of the tar archive.
Creating Archives with tar Extracting files from an archive: • The extension “.tar” is called a “tarball”. • A tarball can be moved, mailed, or placed on portable media. • The “tar –xvf filename.tar” is used to extract the directory tree from the archive. • The command provides instructions to extract the structure from the archive in verbose mode, from a file.
Summary • The split utility is used to break the contents of a long file into a series of small files. • The lp and the lpr utilities manage files directed to the printer. • The find utility searches through a directory tree for files based on specific criteria, and then takes action on each identified file.
Summary • The mtools utility facilitates the copying of files to and from a floppy drive using a DOS-formatted floppy. • The tar utility is used to make an archive of a directory tree or a file. • The archive can be stored on permanent media, sent to a remote machine, or just used to move a structure from one location in a system to another.