310 likes | 455 Views
802.11a/n Wireless LAN Outdoor AP. WNAP-7206. Presentation Outline. Product Position Product Overview Product Features Management – Web UI Applications Product Comparison Appendix Outdoor Antennas Antenna Connection Accessories. Product Position – Outdoor Wireless. WNAP-6305.
E N D
802.11a/n Wireless LAN Outdoor AP WNAP-7206
Presentation Outline • Product Position • Product Overview • Product Features • Management – Web UI • Applications • Product Comparison • Appendix • Outdoor Antennas • Antenna Connection • Accessories
Product Position – Outdoor Wireless WNAP-6305 WNAP-6306 WNAP-7205 WNAP-7206 WAP-7500 2.4GHz 5GHz 11n 300Mbps 2.4G/5GHz WNAP-7300 WNAP-7350 New 11n150Mbps Low Performance High 11a/g 54Mbps Short Distance Long 3 / 31
250 mm 85 mm 60.5 mm IP55 Protection UV Stabilized Product Overview • H/WDesign 4 / 31
Product Overview • Port & LED LAN Port (Connect to client PC via PoE injector) Signal Indicator (Available in Client & Repeater Mode) RP-SMA (F) Connector (Connect to external antenna) Grounding Terminal LAN Port LED Power LED Reset Button (for Factory Default Setting)
Product Overview • ProprietaryPoE interface • Offer Power Supply (DC) with PoE (Power over Ethernet) injector • Up to 60 meters UTP wiring • Pin 4, 5 (+); 7, 8 (-) Power Adapter (12V, 1A) To LAN Switch or PC To WNAP-7206 (UTP wired up to 60m) 6 / 31
Product Overview • Installation • STEP 1:Push the latch in the bottom of WNAP-7206 to remove the sliding cover. 7 / 31
Product Overview • Installation • STEP 2:Plug the RJ-45 Ethernet cable into the LAN Port of WNAP-7206, then slide the cover back to seal the bottom of the WNAP-7206. 8 / 31
Complete Set Product Overview • Installation Diagram • Strongly suggest usingSTPcable (part no. CB-STP-25) • Consider to installELA-100 avoiding thunder strike • Fix WNAP-7206 in optimum location 9 / 31
Product Features • Hardware Design • IP55, Outdoor UV Stabilized Enclosure • -30~70 Degree C wide range of operating temperature • Passive Power over Ethernet Design • RF interface • IEEE 802.11a/n5GHz standards compliant • High output power up to 500mW with multiple adjustable transmit power control • Data rate up to 150Mbps with 802.11n mode • Built-in one RP-SMA(F) Connectors
2X Stable 4X Reliable Product Features CE Requirement WNAP-7206 ESD Test 8kV 15kV Lightning Surge Test 0.5~1kV 4kV 11 / 31
Product Features – 5GHz Advantage • 5GHz Frequency Band • Up to 24 non-overlapping channels, Less interference, stable connection
Product Features • Wireless • Operation Mode • AP, Client CPE (WISP), WDS PtP, WDS PtMP, Repeater (AP+WDS), Universal Repeater (AP+Client) • WDS up to 4 remote APs • SSID Broadcast & Hide • Supported Multiple-SSID up to 4 (default included) • Wireless Security • 64/128/152-bit WEP, WPA, WPA2, WPA-PSK(TKIP), WPA2-PSK(AES) • Max. Wireless Client up to 25 Stations • Output Power Control (High, Middle, Low) • Antenna Alignment & Distance Adjustment helps deployment
Product Features - Operation Mode • Multiple Operation Modes: up to 9 Modes
WNAP-7205 WNAP-7200 5GHz Wireless AP WNAP-7206 WAP-7500 Operation Mode • Access Point • Acts as a central hub for wired / wireless LAN and connect to Internet WNAP-7300 AP Mode 15 / 31
IP Camera RJ-45 Client Mode Operation Mode • Client Bridge • Acts as a wireless client connecting with the remote AP System: Bridge mode Wireless : Client mode WNAP-7206 Wireless AP AP Mode 16 / 31
PC PC Operation Mode • WDS Mode (Bridge) • Two APs in two remote locations connect to each other wirelessly WDS Mode WDS Mode WNAP-7206 WNAP-7206 17 / 31
Operation Mode WDS + AP Mode (Repeater) Bridge two APs and provides access for wireless clients at the same time WNAP-7206 WNAP-7206 Smart Pad WDS+AP Mode WDS+AP Mode
Operation Mode • WISP (Client Router) • Acts as a WISP client router and the WISP subscriber can easily share the WISP connection with only a simple switch. System: Router mode Wireless : Client mode WNAP-7206 WISP Mode No cable implement Wireless connection for Internet access Wireless ISP Provider
Product Features • Management • WAN Connection Types for WISP: • Static IP • DHCP (Dynamic IP) • PPPoE/Russia PPPoE • PPTP/ Russia PPTP • L2TP/ Russia L2TP • BigPond Cable • Support MAC/ IP/ DNS Filtering • Support DHCP Server, UPnP • User Friendly Web-based UI, Quick Setup • System Status includes DHCP Client, Station List, SYS Log • Support Planet DDNS, SNMP
Web UI – Quick Setup STEP.1 Select Operation Mode STEP.2 Configure Wireless Settings STEP.3 Finish Quick Setup
Web UI – Planet DDNS (Router Mode) STEP.1 Go to http://www.planetddns.com/ to register a Planet DDNS account. STEP.2 Configure the DDNS account in WNAP-7206 STEP.3 Allow Remote Access via WAN
Target Market Telecom to Business Telecom to Residential Building to Building Public Area Access Hotel/Resort/Campus Small Wireless ISP Benefit Maximum Bandwidth Flexible in wireless coverage Saving wiring cost Suitable for various application Target Customer Who buy the products WNAP-7200 WNAP-7205 WNAP-7300 WAP-7500 WAP-8000 MAP-2000 / 3000 Series Who ever ask about WISP Outdoor Access Point Long Distance, High Power AP Appendix
Appendix Not Suitable for WNAP-7206 • Outdoor Antennas – 5GHz
Appendix • Outdoor Antennas – 5GHz
Appendix • Accessories For WNAP-7206
Appendix • Accessories
CB-STP-25 WL-LTNA ELA-100 WL-NM-0.6 Appendix • Related Products & Accessories • CB-STP-25 (25M STP Cat5 Cable) • WL-LTNA (Lightning Arrester) • ELA-100 (Ethernet Lightning Arrest Box) • WL-NM-0.6 (RF Cable) • 5GHz Outdoor Antenna • ANT-OM10A • ANT-FP18A • ANT-FP23A • ANT-SE17A • ANT-SE21A