1 / 13

Ultra-Wideband

Ultra-Wideband. - John Burnette -. What is UWB?. Know since 60’s “Zero carrier” or “carrier free” Transmit short bursts Fraction of typical RF carrier wave Thus utlra wide band Difficult to determine carrier frequency. Frequency-domain behavior. Time-domain behavior. Frequency

mandyc
Download Presentation

Ultra-Wideband

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Ultra-Wideband - John Burnette -

  2. What is UWB? • Know since 60’s • “Zero carrier” or “carrier free” • Transmit short bursts • Fraction of typical RF carrier wave • Thus utlra wide band • Difficult to determine carrier frequency

  3. Frequency-domain behavior Time-domain behavior Frequency Modulation 1 0 1 0 Narrowband Communication 1 1 0 Impulse Modulation Ultrawideband Communication 2.4 GHz frequency time 3 10 GHz (FCC Min=500Mhz) What is UWB? Cont’d • Communication that occupies more than 500 MHz of spectrum • Communication with fractional bandwidth of more than 0.2

  4. Bluetooth, 802.11b Cordless Phones Microwave Ovens 802.11a Emitted Signal Power PCS “Part 15 Limit” -41 dBm/Mhz UWB Spectrum GPS 1.6 1.9 2.4 3.1 5 10.6 Frequency (Ghz) UWB Spectrum • FCC allows spectrum overlap for UWB • UWB can operate between 3.1 and 10 GHz as long as it stays below -41dBm

  5. Good things about UWB • 7.5 GHz of “free spectrum” in the US. • The spectrum allocation for UWB overlays existing spectrum but the FCC power limitations are set to minimize interference with existing systems. • High Data rates – under current regulations 500 Mbps at 10 feet.[1] Due to the short-pulse waveform of an UWB signal, they can be used to provide extremely high data rate performance in multi-user network applications. Also, when used for radar, these pulses provide a very fine range resolution and position measurement. • Can function on simple CMOS transmitters so: • Low cost – maybe whole radio can be digital with integrated antenna • Ideal for battery powered devices • “Moores Law Radio” – The data rate scales with the shorter pulse widths which are made increasingly faster by CMOS circuits

  6. Good things cont’d • When used for radar, these pulses provide a very fine range resolution and position measurement • See through walls • Imaging

  7. And more… • waves are relatively immune to multi-path cancellation • When a strong reflected wave arrives partially or totally out of phase with the direct path signal thus canceling part of the signal—reduced amplitude at the receiver end. • Therefore ideal for high-speed networked, mobile wireless applications. • The signals are multiplexed in the time domain so protocols like TDMA can be used to implement this. • UWB system is frequency adaptive. In other words, it can be positioned anywhere in the RF spectrum and still use its full bandwidth.

  8. Good things about UWB cont’d

  9. Low Energy Density • Because of the short pulse duration, the signal can span the RF spectrum, and that at a low energy density. • This makes the signal harder to detect by “unfriendly” receivers • But Drawback • A drawback of the LPD is that it may produce a “minimal interference to proximity systems and minimal RF health hazards • Localization • Sub-centimeter resolution using pulse leading edge detection • passes through building blocks, walls, etc. (LOS not required) • Difficult to intercept in traditional ways • Low interference • Very low spectral energy density

  10. Early Implementation • Take a wideband microwave antenna and use fast rise-time pulse excitations to generate the antennas “impulse” response (it is actually the antenna’s step response that is produced and radiated). • Problem: generates a lot of unwanted, out-of-band radiation which can cause interference with other systems. • Modern techniques create a UWB waveform through pulse shaping prior to actual transmission. • This gives control to the engineers to prevent radiation into restricted bands, thus preserving safely and life systems.

  11. Safety Concerns • Safety-of-flight systems

  12. UWB not perfect • Since this is an RF technology it still has some of the same limitations that are inherent in RF systems. • In designing a UWB system, address tradeoffs like signal-to-noise ratio versus bandwidth, range versus power levels. • This technology isn’t the answer to everything. • For example, high capacity optical fiber or optical wireless systems can still provide higher data rates, although these systems are much more expensive in both component cost and installation.

  13. References • http://www.timedomain.com • http://www.palowireless.com/uwb/tutorials.asp • Technical Issues in Ultra-Wideband Radar SystemsHarold F. Engler, Jr. Chapter Two, Introduction to Ultra-Wideband Radar Systems, edited by James D. Taylor, CRC Press, 1995 • http://www.aetherwire.com/CDROM/General/papers.html

More Related