working-of-high-pressure-washer-explained-by-manmachineworks

1. Working of the High Pressure Washer Explained! Every combination of material and contaminants has a particular pressure that is required to separate the two. Grease on stainless steel will require a different pressure than grease on aluminum, cast iron, or Teflon. Similarly, the paint will require a different pressure to remove it from stainless steel than will ink, chewing gum, or tar. Once the high pressure washer has reached the pressure required for a given combination of material and contaminant, more pressure won’t make the job go faster. How to pick the right High Pressure Washer machine! Measured in Gallons Per Minute (GPM), the flow rate is really the key to determining how long a job will take. So, to determine what pressure washer would be best for a given application, we proudly offer this little tip: multiply the pressure at which a system operates

2. (measured in pounds per square inch – or PSI) by the flow rate in gallons. The resulting number will be a guide to how one system will work compared to others. For any cleaning job requiring 2,000 PSI or less, both pressure washers will do a good job getting the material clean, but the 2000E will actually get the job done faster, despite the fact that it has less power than the other system. When you are considering what size pressure washer to buy, keep in mind that the name “pressure washer” might actually be a contradiction since it is both pressure and flow rate you need to consider. Look at the kinds of work you need to do and how much pressure will be needed to remove the stains you want to address. Metal buildings and steel structures rarely require significant maintenance, but annual cleanings, particularly after long, dusty, dry months are a must. Using a high-pressure spray for cleaning dust, sap, or graffiti from metal buildings. Although the bulletin doesn’t give a specific PSI or water flow for this work, any pressure washer providing at least 3,000 PSI and 3 GPM could be used for metal building cleaning. The same power washer could be used for steel structures like parking covers or metal walkways. Cleaning concrete, stripping paint, removing graffiti or gum, none of these are especially pleasant tasks for maintenance staff, but cleaning is an integral part of building upkeep. Luckily, pressure washers make easier work of these chores so long as you select the right tool for the job. Selecting the proper mix of pressure and flow and you will end up with a clean surface, no damage, and time to spare to focus on managing your buildings. Always maintain a good safety distance and follow the instructed steps towards using the high pressure washer to its maximum capacity in order to achieve the best results. To learn more visit: https://www.manmachineworks.com/