230 likes | 437 Views
Removable Partial Denture RT 453S 2004. Laboratory Project. Summer Quarter RPD (RT453s) Lab Project Models. Model 1: non-mounted maxillary cast x1 Model 2: mounted mandibular cast x1 Model 3: non-mounted mandibular cast x2 Model 4: mounted maxillary fixed technique cast x1
E N D
Removable Partial Denture RT 453S 2004 Laboratory Project
Summer Quarter RPD (RT453s)Lab Project Models • Model 1: non-mounted maxillary cast x1 • Model 2: mounted mandibular cast x1 • Model 3: non-mounted mandibular cast x2 • Model 4: mounted maxillary fixed technique cast x1 • Model 5: non-mounted mandibular fixed technique cast x1
Schedule: 7/9 Project 1: record base/wax rim model #1 &3 7/16, 23 Project 2: cast equilibration/RPD design model #2 & 3* / tooth preparation 7/30, 8/6 Project 3: natural teeth set up/ RPD design / tooth preparation natural teeth 8/13, 20 Project 4: fixed technique in combination case / tooth preparation/ crown wax up model #4 &5 8/27 Surveying practical exam All projects due today with bench instructor’s signatures 9/3 Final Exam
Introduction of Bench Instructors • Group A: Dr. T.L. Chang/Dr. Pamela Margliano • Group B: Dr. Sunderpal Dail • Group C: Dr. Evelyn Chung • Group D: Dr. Ronald Koslowski • Group E: Dr. Joseph Lim/Dr. Samantha King • Group F: Dr. James Stevens/Dr. Melody Balobalo • Group G: Dr. Takahiro Ogawa/Dr. James Kelly
Removable Partial Denture RT 453S 2004 Laboratory Project 1: Record Bases / Wax Rims
Project 1: Record Bases & Wax Rim • Clinical Implications: To evaluate and record the proper VDO and CR position when the remaining dentition is not adequate enough to support the bite registration material
Need the record base and wax rim for the jaw record. Interocclusal Record Adequate tooth number vs. Inadequate tooth number to support the bite registration materials
Model #1 Model #3*
Use your eyes to estimate the correct path of insertion. Then use small amount of wax to block out the undercut.
Minimum Wax Block Out Where? Teeth: marginal gingiva, proximal surfaces, and embrasures Soft tissue: gross undercut Why? To obtain a stable and retentive record base and yet avoid the damage on the cast
Apply the separatingmedium Wait for the first coat air dry, then apply the second coat.
Lightly vaseline your fingers. Mold the acrylic resin into the arch shape wafer. Mix acrylic resin in a paper cup to a thick creamy consistency Adapt the acrylic resin wafer onto the cast with even pressure. 2-3 mm thickness is desired. Press the excess against the edge of the cast to trim it off.
Round, smooth, and polish the record base Before adding the wax rim, roughen the acrylic surface for mechanical retention
Record base extension: 2-3 mm short of vestibule Record base extension next to the teeth: Avoid the extend toward to the tooth Re
Record base: 2-3 mm thick Do not overextend
Extend the record base onto the proximal, palatal/lingual surfaces of the teeth to enhance the retention, stability, and support of the record base
Keep the space for the bite registration material
Bite registration materials: ZOE bite registration paste Wax Compound Silicone
Selectively adding the wire clasps can improve the retention & stability of the record base for accurate jaw record
Record base & wax rim • Stable • Good support • Rigid • Comfort Accurate interocclusal record
Cast #2 Cast #3** Mount the #3 mandibular cast at the best contact position by next Friday