180 likes | 376 Views
U. S. Department of Transportation Pipeline and Hazardous Materials Safety Administration. www.dot.gov. PHMSA Update on New MAOP Regulation and PIPA. Western Region Gas Conference Tempe, Arizona August 25, 2009 Christopher Hoidal Western Region Director Office of Pipeline Safety.
E N D
U. S. Department of Transportation Pipeline and Hazardous Materials Safety Administration www.dot.gov
PHMSA Update on New MAOP Regulationand PIPA Western Region Gas Conference Tempe, Arizona August 25, 2009 Christopher Hoidal Western Region Director Office of Pipeline Safety
Objectives of Recent Rulemaking • Outgoing Administration focused on resolving many of our rulemaking mandates from Congress and Pipeline Safety Reauthorizations. • NTSB recommendations addressed. • Collecting better data to aid agency decisions. • Recurring special permits requests codified into regulations.
Alternate MAOP Rule • Allows for an increase of maximum allowable operating pressure (MAOP) over that currently allowed (up to 80% of Specified Minimum Yield Strength in Class 1 areas) • Applies to gas transmission lines • Increases energy capacity while maintaining safety • Requires additional design and construction considerations • Requires higher level of maintenance and assessment • Requires 180 day notice to Region about intent to use alternate MAOP level
Timeline • Special permits were granted on a case by case basis • Proposed rule developed to codify Special Permit conditions • Notice of Proposed Rulemaking (NPRM) published March 12, 2008 • Final rule published October 17, 2008 • Final rule effective 60 days from date of publication…December 22, 2008
Two New Code Sections • 192.112 - Additional Design Requirements for Steel Pipe Using Alternative Maximum Allowable Operating Pressure • 192.620 – Alternative Allowable Maximum Allowable Operating Pressure for Certain Steel Pipelines
Who is doing MAOP Increases in the West? • Kern River Gas Transmission - special permit • Kinder Morgan REX - special permit • Two others strongly considering under new MAOP regulation: • One will be a new pipeline. • The other was commissioned in 2007.
Practical Difficulties Complying with MAOP Provisions • Hydrostatic Test Pressure in Hilly Terrain • Class Changes • Half mile CP Test Station Spacing • Completion of Coating Surveys, and Subsequent Investigative Digs • Mill Certs for Older Pipelines • Depth of Cover Survey & Documented Land Use
Pipe Quality Issues • Quality of Steel Pipe has been recent concern • Low strength coils or plates (X-70, X-80) • Inconsistent chemical and mechanical properties • Poor rolling practices at some mills • See our Advisory Bulletin (PHMSA 2009-1048) • Industry actions • Enhanced QA/QC practices being adopted (INGAA pipe quality summit – strategies to improve pipe quality) • Working with API, ASME to address Advisory Bulletin • More hands on inspection at mill • Moving more rolling of specialty steels to US
Increasing Protection on Pipelines in Populated Areas • New MAOP regs focus on increasing overall pipeline safety (and efficiency) in remote areas through enhanced design and engineering. • PIPA efforts focus on improving safety of pipelines in populated areas through controlled land use and education.
Pipeline and Informed Planning Alliance(PIPA) • Through PIPA, PHMSA is engaging property developers, home builders, pipeline operators, Local, State and Federal government agencies to develop best practices for property development adjacent to transmission pipelines. • Draft Report available addressing recommendations from three task teams. • Final Report expected soon.
Task Team Objectives Protecting Communities What should pipeline safety stakeholders do, or avoid doing, adjacent to the pipeline ROW to reduce the risk to communities? Protecting Transmission Pipelines What should pipeline safety stakeholders do, or avoid doing, on the ROW to reduce the risk to transmission pipelines? Communications How should the risks to transmission pipelines and communities be communicated to pipeline safety stakeholders?
Thank you!! Questions??