Product Training – WBTS + DMP330

1. Product Training – WBTS + DMP330

3. Internet DMP #202 DMP#203 DMP #204 DMP #201 Access Point Hot Spot DMP WAN Broadband Modem L1 #301 L2 PSTN L3 #302 Existing PBX #303 . . . L4 #304 PBX Phone WBTS #201 DMP Enterprise GSM Network #202 #203 N #204 Plug WBTS to the SLT ports of exiting PBX

4. WBTS + DMP330 Hardware Installation

5. WBTS Hardware Overview Front view of WBTS

6. WBTS Hardware Overview Back view of WBTS

7. WBTS Hardware Overview Front Panel of WBTS Rear Panel of WBTS

8. Hardware Installation • -- WBTS ( Wireless Base Transceiver Station) • 4 POTS Ports (L1 – L4) : • to be plugged into single line ports of any PBX/KTS • WAN port : • to be plugged into the Ethernet port of ADSL/Cable modem • LAN port (LAN1 – LAN3) : • to be plugged into the Ethernet port of PCs or network devices • PWR IN : • to be plugged into the power cord of power adaptor of WBTS

9. Hardware Installation

10. Hardware Installation

11. WBTS + DMP330 Software Configuration

12. Software configuration Introduction 用網路線將WBTS和電腦連接,WBTS插在LAN Ports,電腦設自動取得IP,打開IE0瀏覽器, 網址處Key in 192.168.1.1 - Username / Password for Configuration Web page Default Username / Password is ‘admin1234’ / ‘123456’ . - Quick configuration(快速安裝) -- Wizard Restore to default value on WBTS, then it will enter the Wizard mdoe including the following settings. -WAN Settings: It supports DHCP, Static IP and PPPoE. -LAN Settings: Here you can enable / disable DHCP server. -Wireless Basic: Here you can enable / disable wireless or changing SSID. -Wireless Security: Here you can enable / disable wireless security. -Internet Time: Here you can enable / disable Internet time and changing time zone. -Numbering Plan: Here you can define the numbering plan range. -Call Routing Table: Here you can set the call routing rule that allows the numbers you dialed will thru the correct interface (PSTN or IP trunk).

13. Software configuration Introduction 輸入固定IP資料

14. Software configuration Introduction

15. Software configuration Introduction 設AP的名稱,若有設很多AP要漫遊,請所有AP的SSID要設一樣

16. Software configuration Introduction 看是否要設金鑰

17. Software configuration Introduction

18. Software configuration Introduction 設手機機號碼

19. Software configuration Introduction

20. Software configuration Introduction 撥碼設定

21. Software configuration Introduction

22. Software configuration Introduction - Device Info -Summary: Here you can see “Version Info.” and “Network info.”. -Statistics: Here you can see “Network Statistics”. -Route: Here you can see “Route Info.”. -ARP: Here you can see “ARP Info.”.

23. Software configuration Introduction - Device Info -Summary : Here you can see “Version Info.” and “Network info.”.

24. Software configuration Introduction - Device Info -Statistics : Here you can see “Network Statistics”.

25. Software configuration Introduction - Device Info -Route : Here you can see “Route Info.”.

26. Software configuration Introduction - Device Info -ARP : Here you can see “ARP Info.”.

27. Software configuration Introduction - Advanced -LAN: Here you can enable / disable DHCP server.

28. Software configuration Introduction - Advanced -WAN: It supports DHCP, Static IP and PPPoE.

29. Software configuration Introduction - Advanced -Dynamic DNS: It allows you to have a alias / URL name for dynamic IP address in any domain.

30. Software configuration Introduction - Advanced -Dynamic DNS: It allows you to have a alias / URL name for dynamic IP address in any domain.

31. Software configuration Introduction - Wireless -Basic: You can enable or disable the wireless LAN interface, hide the network from active scans, set the wireless network name (also known as SSID) and restrict the channel set based on country requirement.

32. Software configuration Introduction - Wireless -Security: You can set the network authorization method, select data encryption, specify whether a network key is required to authenticate to this wireless network and specify the encryption strength.

33. Software configuration Introduction - Wireless -Mac Filter: It allows users to Add/Remove hosts with the specified MAC addresses that are able or unable to access the wireless network.

34. Software configuration Introduction - Wireless -Wireless Bridge: It allows the users to configure wireless bridge features of the wireless LAN interface.

35. Software configuration Introduction - Wireless -Advanced: It allows you to configure advanced features of the wireless LAN interface.

36. Software configuration Introduction - Wireless -Station Info: Authenticated wireless stations and their status will be shown here.

37. Software configuration Introduction - Voice -Phone: -Phone Extension: The WBTS combines Proxy and Registrar servers in its application. The all phones registered to the internal Registrar are set here.

38. Software configuration Introduction - Voice -Trunk: -Answering Positions: It allows you to configure answering position for each PSTN Trunk line. You can choose Auto Attendant, or manually configure the target phone number on Day/night basis. 請選AA

39. Software configuration Introduction - Voice -Trunk -Call Routing Table:

40. Software configuration Introduction - Voice -Trunk -Call Routing Table: Every number you dialed from the phone of WBTS will try to match the call routing table, and choose the corresponding route to send the call. So, here is the explanation of call routing table. 1. 'From' and 'To' means the preceding digits of the dialing number. For example, From = 0, To = 9 , that means First digit allows 0 - 9. Also, if you set From = 200, To = 300, that means First 3 digit allows 200 - 300. So, it depends what number you will dial. 2. If the number you dialed matched the 'From & To' range, then system will check the next item, Max and Min. - Min : Minimun digit , the table will be triggered by the Minimum digit , then will wait the number dialing till 'Max digit' or the inter- digit time out, and then sending the number.

41. Software configuration Introduction - Voice -Trunk -Call Routing Table: - Max: Maximum digit, the table will send the number when the number digit match the Max. digit. 3.'Del' : it means deleting the preceding number. For example, if Del =2, and you have dialed '123', then the system will delete '12', and just send '3'. 4.'Insert': it means insert the prefix number. For example, if Insert = 12345, and you have dialed '666', then system will send '12345666'. 5.'Destination': it means the call will go through the way / interface.

42. Software configuration Introduction - Voice -System -Numbering Plan: It allows you to configure extension number range. You can also define some special service numbers in the table.

43. Software configuration Introduction - Voice -System -Service Mode: It allows you to configure the day/night service mode. You can also customize the working time manually for each weekday. This service mode settings is for answering position.

44. Software configuration Introduction - Voice -System -Transmission: It allows you to configure some parameters regarding audio and FXO ports.

45. Software configuration Introduction - Voice -Voice Mail -Advanced: It allows you to browse, upload or download voice files and settings via FTP.

46. Software configuration Introduction - Management -Settings: System Administrator can do the WBTS settings backup, restore, and restore to default here.

47. Software configuration Introduction - Management -Settings: System Administrator can do the WBTS settings backup, restore, and restore to default here.

48. Software configuration Introduction - Management -Settings: System Administrator can do the WBTS settings backup, restore, and restore to default here.

49. Software configuration Introduction - Management -Log: It allows System Administrator to view the System Log and configure the System Log options.

50. Software configuration Introduction - Management -Registered Phone: This page lists the information of registered phones.