1 / 48

Oscillating Water Column and Government Regulation of Ocean Energy

Oscillating Water Column and Government Regulation of Ocean Energy. Jennifer Wolff jenwolff220@yahoo.com Energy Law Spring 2007. Introduction.

margaux
Download Presentation

Oscillating Water Column and Government Regulation of Ocean Energy

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Oscillating Water Column and Government Regulation of Ocean Energy Jennifer Wolff jenwolff220@yahoo.com Energy Law Spring 2007

  2. Introduction Renewable energy technologies provide alternatives to fossil-fueled power plants for the generation of electricity, an essential step towards reducing our nation’s dependence on fossil fuels. One category of emerging renewable energy technologies relates to OCEAN ENERGY.

  3. Introduction Among other types of renewable energy, oceans contain energy in the form of • Waves • Tidal currents

  4. Wave Energy Where does wave energy originate? • Differential warming of the earth causes pressure differences in the atmosphere, which generate winds • As winds move across the surface of open bodies of water, they transfer some of their energy to the water and create waves

  5. Wave Energy The amount of energy transferred and the size of the resulting wave depend on • the wind speed • the length of time for which the wind blows • the distance over which the wind blows, or fetch Therefore, coasts that have exposure to the prevailing wind direction and that face long expanses of open ocean have the greatest wave energy levels.

  6. Wave Energy The strongest winds blow between 30˚ and 60˚ in latitude. Western coastlines at these latitudes experience the most powerful waves. Global Wave Energy Resource Distribution (measuring the amount of power in kW contained in each linear meter of wave front)

  7. Wave Energy • The Electric Power Research Institute (EPRI) estimates that the annual average incident wave energy off of the U.S. coastline amounts to 2100 terawatt hours per year. (A terawatt equals a trillion watts.) • Harnessing 20% of that total energy at 50% conversion efficiency would generate as much electricity as conventional hydropower currently provides – 7% of total U.S. electricity consumption, or 270 terawatt hours per year.

  8. How do we harness wave energy? In order to extract this energy, wave energy conversion devices must create a system of reacting forces, in which two or more bodies move relative to each other, while at least one body interacts with the waves. There are many ways that such a system could be configured.

  9. Wave Energy Technologies • Waves retain energy differently depending on water depth • Lose energy slowly in deep water • Lose energy quickly as water becomes shallower because of friction between the moving water particles and the sea bed • Wave energy conversion devices are designed for optimal operation at a particular depth range

  10. Wave Energy Technologies Therefore, devices can be characterized in terms of their placement or location. • At the shoreline • Near the shoreline • Off-shore One wave energy conversion system that has proven successful at each of these locations is the OSCILLATING WATER COLUMN.

  11. Oscillating Water Column An Oscillating Water Column (OWC) consists of a partially submerged structure that opens to the ocean below the water surface. This structure is called a wave collector. This design creates a water column in the central chamber of the collector, with a volume of air trapped above it.

  12. Oscillating Water Column • As a wave enters the collector, the surface of the water column rises and compresses the volume of air above it. • The compressed air is forced into an aperture at the top of the chamber, moving past a turbine. • As the wave retreats, the air is drawn back through the turbine due to the reduced pressure in the chamber.

  13. Oscillating Water Column The turning of the turbine drives a generator, producing electricity!

  14. Oscillating Water Column The type of turbine used is a key element to the conversion efficiency of an OWC. Traditional turbines function by gas or liquid flowing in one direction and at a constant velocity. When the flow is not always from the same direction or at a constant velocity – such as in the OWC – traditional turbines become ineffective.

  15. Oscillating Water Column Different types of turbines have been developed for the OWC to address this problem. The technologies have been demonstrated to work in a number of locations, with varying degrees of efficiency. • Wavegen’s LIMPET • Energetech’s Australia Wave Energy System

  16. LIMPET Pictured here is the LIMPET (Land Installed Marine Powered Energy Transformer), an Oscillating Water Column located on the Isle of Islay, Scotland, and designed by Wavegen

  17. LIMPET Constructed in a man-made gully on a rocky shoreline facing the open Atlantic ocean

  18. LIMPET To overcome the problems of traditional turbines, LIMPET employs a Wells turbine that turns in the same direction irrespective of the airflow direction.

  19. LIMPET • The collector is tilted such that the resonance of the internal water column coincides with the peak energy period of the waves, easing passage of water into the water column • The collector was divided into 3 chambers, with large holes at the top of each dividing wall to allow the air above the 3 water columns to combine to feed the turbine-generation system • This design optimized performance for annual average wave intensities of 15 – 25 kW/m

  20. LIMPET • The system contains a pair of Wells turbines, each of which is connected to a 250 kW induction generator • LIMPET has a generation capacity of 500 kW • Designed to supply power into the Islay grid

  21. LIMPET LIMPET became operational in November 2000. Although the grid could accept 150 kW, LIMPET has only occasionally produced that high of an output since that time. Wavegen has determined that LIMPET’s performance was lower than expected because of issues specific to that project rather than fundamental issues of the design of the device or technology.

  22. LIMPET Wavegen has concluded that in spite of its low performance, LIMPET is a success: • Provided valuable experience in construction and operation to be used to develop future projects • Demonstrated the ability of the structure to withstand hostile conditions on an exposed cliff edge • Community approved of its low profile as less intrusive • The generated electricity is being used to power an electric bus

  23. On-shore versus Off-shore In spite of the success of this technology in an on-shore application, most wave energy experts agree that off-shore or near-shore devices offer greater potential than shoreline devices.

  24. Advantages Easier to access for construction and maintenance Less installment costs and grid connection charges Could be incorporated into harbor walls or water breaks, performing a dual service for the community Disadvantages Limited number of suitable sites / high competition for use of the shoreline Environmental concerns for on-shore devices may be greater Much less energy available to on-shore devices because water depth usually decreases closer to the shore On-shore technologies

  25. Energetech’s Australia Wave Energy System Pictured here the Australia Wave Energy System, an Oscillating Water Column located off the coast of Port Kembla, New South Wales, Australia and designed by Energetech

  26. Energetech’s Australia Wave Energy System • Located 200 meters from the Port Kembla Harbour Breakwater • Typically waves at Port Kembla exceed 1m in height 63% of the time (producing greater than 110kW on those occasions) and exceed 2m in height 5.5% of the time (producing greater than 400 kW on those occasions).

  27. Energetech’s Australia Wave Energy System • Designed to generate 500 kW, enough to power 500 homes • The system uses a variable pitch turbine called a Denniss-Auld turbine, potentially with a higher conversion efficiency than the Wells turbine • The turbine drives an induction generator

  28. Energetech’s Australia Wave Energy System • System components are computer controlled • The computer uses a sensor system with a pressure transducer to measure the pressure exerted on the ocean floor by each wave as it approaches the collector • The transducer sends a signal proportional to that pressure to a Programmable Logic Controller which adjusts various parameters • Optimizes conversion for the particular conditions and energy content of the wave • Protects system components and ensures safety

  29. Energetech’s Australia Wave Energy System • The device employs a parabolic wall to focus the wave energy into the collector • The ends of the wave plane are reflected by the parabolic wall and converge on the focus of the parabola • At the focus, the water will rise and fall with an amplitude of approximately 3 times that of the incoming waves • The center of the collector sits at the focus of the parabolic wall

  30. Energetech’s Australia Wave Energy System • The plant also includes a small desalination unit that can produce nearly 2000 liters of fresh drinkable water per day using nothing but the seawater and wave energy.

  31. Energetech’s Australia Wave Energy System • The project became operational in December 2006. • A local power utility is purchasing the electricity generated and selling it to residents in the local community.

  32. Obstacles to Development These developments and applications of the OWC technology in the on-shore and near-shore environments demonstrate that there isn’t a lack of conceptual ideas or design solutions to engineering obstacles. Are there any obstacles to wave energy technologies from becoming more commercially available?

  33. Obstacles to Development The greatest challenge is generating electricity from wave energy at a cost that is acceptable to the market. Currently, costs are high • Lack of federal funding • The Energy Policy Act of 2005 authorizes the Department of Energy to conduct research, development, demonstration, and commercial application programs for ocean and wave energy technologies • Yet the President’s budgets have never appropriated any funds for these activities, including 2008’s budget

  34. Obstacles to Development • Typically, technologies are being developed by small companies with limited capital, increasing the chance of failure with early prototypes. These failures may lead potential investors to lose confidence in the technologies. • Being relatively new technologies, they are unfamiliar to licensing and resource agencies and costly to permit.

  35. Regulatory Scheme Because wave energy technologies are so new, so numerous, and so diverse, they raise many questions for the agencies that manage the natural resources in which these devices would be deployed. Many of the environmental impact questions that must be addressed in order to permit even a prototype cannot be answered without deploying the device and monitoring the impacts.

  36. Regulatory Scheme Some environmental impacts that must be considered when permitting a wave energy conversion device: • Disturbance or destruction of marine life • Threat to navigation or transportation from collisions due to the low profile of some wave energy devices above the water • Degradation of scenic ocean front views from wave energy devices near or on the shore • Disturbance of recreation in near-shore environments • Alteration of sediment patterns

  37. Regulatory Scheme The difficulty in assessing these environmental considerations for wave energy technologies contribute to the high costs in carrying out environmental impact assessments and obtaining permits and licenses, even for prototypes. The complexity, cost, and uncertainty of the regulatory process are preventing the full potential of technology development from being realized.

  38. Regulatory Scheme One complexity is the number of statutes and regulations that could apply to a wave energy project depending on the nature and location of the project: • FERC licensing requirements under Federal Power Act • With limited exceptions • Corps of Engineers 33 U.S.C. § 404 permit • Coast Guard regulations • National Environmental Policy Act • Coastal Zone Management Act • Fish and Wildlife Coordination Act • Endangered Species Act

  39. Regulatory Scheme There is uncertainty relating to which government agency has primary permitting authority over wave energy technologies

  40. Regulatory Scheme The Energy Policy Act of 2005 amended the Outer Continental Shelf Lands Act to authorize the Minerals Management Service (MMS) to lease the Outer Continental Shelf (OCS) – or lands controlled by the U.S. beyond 3 miles from shore – for alternate energy projects, including wave, tidal and current technologies. MMS contends that this amendment makes it the lead agency for wave, current, and tidal projects on the OCS.

  41. Regulatory Scheme However, the Federal Energy Regulatory Commission (FERC) has asserted jurisdiction. The Federal Power Act, 16 U.S.C. § 817(1), states, “it shall be unlawful for any person...for the purpose of developing electric power, to construct, operate or maintain any dam...reservoir, power house or other works...across navigable water of the United States or upon any part of public lands or reservations of the United States...except in accordance with a license...[issued by FERC].”

  42. Regulatory Scheme FERC asserts that wave energy technologies are hydro projects because they use water to generate electricity and that the structures where generation takes place are “powerhouses” for the purposes of the Federal Power Act. FERC claims jurisdiction over wave energy projects up to 12 miles from shore, overlapping MMS’s claim of jurisdiction.

  43. Regulatory Scheme Numerous entities have sought preliminary permits and licenses for wave and tidal energy projects from FERC. Preliminary permit • Issued for up to three years • It maintains priority of application for license while the permittee studies the site and prepares to apply for a license • Does not allow construction at the site • Usually liberally granted by FERC • Approximately 45 preliminary permit applications for ocean energy projects are pending before FERC

  44. Regulatory Scheme Licenses • Necessary for construction • In issuing a license, FERC must give “equal consideration” to environmental and energy concerns and be “best adapted to a comprehensive plan for developing a waterway, for protecting fish and wildlife and for other beneficial uses such as recreation, irrigation, water supply.”

  45. Regulatory Scheme Changes in the regulatory scheme • On February 15, 2007, FERC published notice in the Federal Register for a comment period on the standard of review it should use when considering applications for preliminary permits to utilize wave, current, and instream technologies • FERC also suggested its willingness to expedite the application and approval of licenses for such projects and extend the exceptions to the licensing requirements. It announced that a technical conference would be held about the matter at a later date. • The comment period on its proposal will close on April 30, 2007.

  46. Rhode Island – Energetech’s GreenWave Project • Energetech proposed constructing an OWC similar to that in Port Kembla off the coast of Rhode Island – called the GreenWave project • Analysis has shown the area to be an ideal location due to local wave and geological structure, proximity to the power grid, and ease of installation

  47. Rhode Island – Energetech’s GreenWave Project • The structure would have a generating capacity of 500 kW, enough to power 300 homes • The project is not for profit, but to demonstrate the commercial viability of wave energy technologies • Energetech intended the device to be operational in 2006, but the project is currently caught in the regulatory red tape

  48. Conclusion • There is a large supply of wave energy available • The technology already exists for extraction of this energy • The technical challenges are solvable • The problems lie in facilitating the testing and development of the technology to make it more affordable • Need federal funding • Need a regulatory process conducive for rapid deployment of prototypes and research equipment

More Related