1 / 47

IP Addressing & Subnetting Made Easy

IP Addressing & Subnetting Made Easy. Part 1: Working with IP Addresses. Subnet Mask. With the rapid growth of the internet & the ever-increasing demand for new addresses, the standard address class structure has been expanded by borrowing bits from the Host portion to allow for more Networks.

mariongarcia
Download Presentation

IP Addressing & Subnetting Made Easy

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. IP Addressing & Subnetting Made Easy

  2. Part 1: Working with IP Addresses

  3. Subnet Mask • With the rapid growth of the internet & the ever-increasing demand for new addresses, the standard address class structure has been expanded by borrowing bits from the Host portion to allow for more Networks. • Under this addressing scheme, called Subnetting, separating the Network & Host requires a special process called Subnet Masking.

  4. Subnet Mask (Cont.) • The subnet masking process was developed to identify & extract the Network part of the address.

  5. Subnet Mask (Cont.) • The function of a subnet mask is to determine whether an IP address exists on the local network or whether it must be routed outside the local network. • It is applied to a message’s destination address to extract the network address. • If the extracted network address matches the local network ID, the destination is located on the local network.

  6. Subnet Mask (Cont.) • However, if they don’t match, the message must be routed outside the local network. • The process used to apply the subnet mask involves Boolean Algebra to filter out non-matching bits to identify the network address.

  7. Boolean Algebra • Boolean Algebra is a process that applies binary logic to yield binary results. • Working with subnet masks, you need only 4 basic principles of Boolean Algebra: • 1 and 1 = 1 • 1 and 0 = 0 • 0 and 1 = 0 • 0 and 0 = 0

  8. Boolean Algebra (Cont.) • In another words, the only way you can get a result of a 1 is to combine 1 & 1. Everything else will end up as a 0. • The process of combining binary values with Boolean Algebra is called Anding.

  9. Default Standard Subnet Masks • There are default standard subnet masks for Class A, B and C addresses:

  10. A Trial Separation • Subnet masks apply only to Class A, B or C IP addresses. • The subnet mask is like a filter that is applied to a message’s destination IP address. • Its objective is to determine if the local network is the destination network.

  11. A Trial Separation (Cont.) • The subnet mask goes like this: • If a destination IP address is 206.175.162.21, we know that it is a Class C address & that its binary equivalent is: 11001110.10101111.10100010.00010101

  12. A Trial Separation (Cont.) • We also know that the default standard Class C subnet mask is: 255.255.255.0 and that its binary equivalent is: 11111111.11111111.11111111.00000000

  13. A Trial Separation (Cont.) • When these two binary numbers (the IP address & the subnet mask) are combined using Boolean Algebra, the Network ID of the destination network is the result:

  14. A Trial Separation (Cont.) • The result is the IP address of the network which in this case is the same as the local network & means that the message is for a node on the local network.

  15. Part 2: Subnetting

  16. Introduction • Subnetting is the foundation underlying the expansion of both Local Networks & the Internet in today’s world. • Subnetting has become essential knowledge for the Administrator of any network. • There are 2 fundamental reasons why subnetting has so much importance in today’s networking environment:

  17. Introduction (Cont.) 1. The world is running out of available IP addresses. There just isn’t an unlimited number of IP addresses available & subnetting helps extend the existing addresses until either the next version of IP is rolled out or some other technology charges on the scene.

  18. Introduction (Cont.) 2. Subnetting reduces the size of the routing tables stored in routers. Subnetting extends the existing IP address base & restructures the IP address. As a result, routers must have a way to extract from an IP address both the Network address & the Host address.

  19. Introduction (Cont.) • There are only 3 usable IP address classes: • Class A • Class B • Class C • Class A networks have the highest number of available hosts. • Class C networks have the fewest number of hosts.

  20. Subnetting Networks ID • A 3-step example of how the default Class A subnet mask is applied to a Class A address:

  21. Subnetting Networks ID (Cont.) • In the previous slide, the default Class A subnet mask (255.0.0.0) is AND’d with the Class A address (123.123.123.1) using Boolean Algebra, which results in the Network ID (123.0.0.0) being revealed. • The default Class B subnet mask (255.255.0.0) brings out the 16-bit network ID & the default Class C subnet mask (255.255.255.0) brings out the 24-bit network ID.

  22. Subnetting, Subnet & Subnet Mask • Subnetting, a subnet & a subnet mask are all different. • In fact, the 1st creates the 2nd & is identified by the 3rd. • Subnetting is the process of dividing a network & its IP addresses into segments, each of which is called a subnetwork or subnet.

  23. Subnetting, Subnet & Subnet Mask (Cont.) • The subnet mask is the 32-bit number that the router uses to cover up the network address to show which bits are being used to identify the subnet.

  24. Subnetting • A network has its own unique address, such as a Class B network with the address 172.20.0.0 which has all zeroes in the host portion of the address. • From the basic definitions of a Class B network & the default Class B subnet mask, you know that this network can be created as a single network that contains 65,534 individual hosts.

  25. Subnetting (Cont.) • Through the use of subnetting, the network from the previous slide can be logically divided into subnets with fewer hosts on each subnetwork. • It not only improves the available shared bandwidth, but it cuts down on the amount of broadcast traffic generated over the entire network as well.

  26. Subnetting (Cont.) • The 2 primary benefits of subnetting are: • Fewer IP addresses, often as few as one, are needed to provide addressing to a network. • Subnetting usually results in smaller routing tables in routers beyond the local internetwork.

  27. Subnetting (Cont.) • Example of subnetting: when the network administrator divides the 172.20.0.0 network into 5 smaller networks – 172.20.1.0, 172.20.2.0, 172.20.3.0, 172.20.4.0 & 172.20.5.0 – the outside world stills sees the network as 172.20.0.0, but the internal routers now break the network addressing into the 5 smaller subnetworks.

  28. Subnetting (Cont.) • In the example, only a single IP address is used to reference the network & instead of 5 network addresses, only one network reference is included in the routing tables of routers on other networks.

  29. Borrowing Bits to Grow a Subnet • The key concept in subnetting is borrowing bits from the host portion of the network to create a subnetwork. • Rules govern this borrowing, ensuring that some bits are left for a Host ID. • The rules require that two bits remain available to use for the Host ID & that all of the subnet bits cannot be all 1s or 0s at the same time.

  30. Borrowing Bits to Grow a Subnet (Cont.) • For each IP address class, only a certain number of bits can be borrowed from the host portion for use in the subnet mask.

  31. Bits Available for Creating Subnets Address Class Host Bits Bits Available for Subnet A 24 22 B 16 14 C 8 6 Borrowing Bits to Grow a Subnet (Cont.)

  32. Subnetting a Class A Network • The default subnet mask for a class A network is 255.0.0.0 which allows for 16,777,214 hosts on a single network. • The default subnet mask uses only 8 bits to identify the network, leaving 24 bits for host addressing .

  33. Subnetting a Class A Network (Cont.) • To subnet a Class A network, you need to borrow a sufficient number of bits from the 24-bit host portion of the mask to allow for the number of subnets you plan to create, now & in the future. • Example: To create 2 subnets with more than 4 million hosts per subnet, you must borrow 2 bits from the 2nd octet & use 10 masked bits for the subnet mask (11111111.11000000) or 255.192 in decimal.

  34. Subnetting a Class A Network (Cont.) 7

  35. Class A Subnet Masks (Cont.) A sample of subnet mask options available for Class A addresses.

  36. Class A Subnet Masks (Cont.) • All subnet masks contain 32 bits; no more, no less. • However a subnet mask cannot filter more than 30 bits. This means 2 things: • One, that there are never more than 30 bits set to 1 in the subnet mask. • Two, that there are always at least 2 bits available for the Host ID.

  37. Class A Subnet Masks (Cont.) • The subnet mask with the highest value (255.255.255.252) has a binary representation of: 11111111.11111111.11111111.11111100 • The 2 zeroes in this subnet mask represent the 2 positions set aside for the Host address portion of the address.

  38. Class A Subnet Masks (Cont.) • Remember that the addresses with all ones (broadcast address) & all zeroes (local network) in the host portion of the address cannot be used as they have special meanings.

  39. Subnetting Class B & Class C • The previous table on slide 35 “Class A Subnet Masks” is similar to the tables used for Class B & Class C IP addresses & subnet masks. • The only differences are that you have fewer options (due to a fewer number of bits available) & that you’re much more likely to work with Class B & Class C networks in real life.

  40. Subnetting Class B & Class C (Cont.) A sample of the subnet masks available for Class B networks.

  41. Subnetting Class B & Class C (Cont.) A list of the subnet masks available for Class C networks.

  42. Knowing How to Calculate Subnets • To determine the number of subnets & hosts per subnet available for any of the available subnet masks, use 2 simple formulas to calculate these numbers:

  43. Knowing How to Calculate Subnets (Cont.) • Although the 2 formulas look identical, the key is to remember the number you’re trying to calculate, hosts or subnets. • Ex., suppose you are asked to determine the number of subnets available & the number of hosts available on each subnet on the network 192.168.1.0 using a subnet mask of 255.255.255.240.

  44. Knowing How to Calculate Subnets (Cont.) • Using the subnet & hosts formulas, the answers are easily calculated. Of course, you must know your powers of 2 to calculate the answers.

  45. Class C Subnets • Knowing the relationships in this table will significantly reduce the time you spend calculating subnetting problems.

  46. Class B Subnets • To calculate the number of subnets & hosts available from a Class B subnet mask, you use the same host & subnet formulas described for calculating Class C values. • Using these formulas I have constructed a table that contains the Class B subnet & host values.

  47. Class B Subnets (Cont.)

More Related