1 / 9

Columns and Struts

Columns and Struts. Q. Compare Column and Struts A. Effective length (l e ) Where l is actual length. Radius of Gyration , k = √(I/A) I = Moment of Inertia (mm 4 ) A = Area of Section (mm 2 ) Slenderness ratio, λ = le/k min Long Column v/s Short Column Le/k min > 50 for long

markku
Download Presentation

Columns and Struts

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Columns and Struts

  2. Q. Compare Column and Struts A.

  3. Effective length (le) Where l is actual length

  4. Radius of Gyration , k = √(I/A) I = Moment of Inertia (mm4) A = Area of Section (mm2) Slenderness ratio, λ = le/kmin Long Column v/s Short Column Le/kmin > 50 for long Le/kmin < 50 for short Or, Le/d > 15 for Long Le/d < 15 for short

  5. Euler’s Formula Euler’s Crippling Load, PE = ∏²EI /le² Where, E is Modulus of Elasticity (Mpa) I is MOI or 2nd Moment of area (mm4) Le is Effective length (mm) Also known as Critical Buckling Load

  6. Rankine’s Formula 1/P = 1/PC + 1/PE Where, P is Rankine’s crippling Load PC is Crushing Load PE is Euler’s crippling Load If A is the Cross section area of column PC = fC . A PE = ∏²EI /le² I = Ak2 Where Rankine’s Constant, α = fc/(∏²E) Thus, P = PR = (fC . A) / (1 + αλ)

  7. Eccentric Loading • Short Column σmax = P/A + P.e/Z = P/A (1 + eyc/k2) Z = Ak2/ yc • Long Column • Rankine’s Formula σc= P/A (1 + eyc/k2) (1 + αle/k) • Euler’s Formula • σmax = P/A + Pe v /Z • σmin = P/A – Pe v /Z v = sec {(le/2) /√[P/(EI)]}

  8. For Discussion / Self Study • Prof. Perry’s formula: (Refer to Section 9.15 Rethaliya, page 627) • Column with Initial Curvature- Axial Load (Refer to Section 9.16 Rethaliya, page 629) • Column with Lateral loading • Pinned, Subject to Point Load • Pinned, Subject to UDL (Refer to Section 9.17a and 9.17b, Rethaliya, page 632)

  9. Tutorial • Columns and Struts (Chapter 9 Rethaliya) • 1. Page 694: Exercises 1 to 7 • 2. Examples: No. 1, 3, 5, 6, 8, 10, 11

More Related