By Franklin Electric

1. By Franklin Electric SubDrive Constant Pressure Controller

2. SubDrive Family

3. SubDrive Constant Pressure Controller • The CP Water – SubDrive 75 uses state-of-the-art electronics technology to provide constant water pressure through variable speed control of standard ¾, 1 or 1½ Hp pump ends, adding significant value and performance to Residential & Commercial water systems. • Produce 1½ Hp performance with a ¾ Hp pump end.

4. SubDrive Constant Pressure Controller • The CP Water – SubDrive 150 was the second addition to the CP Water family of SubDrives. • The SubDrive 150 provides constant water pressure through variable speed control of a 1½ , 2 or 3 Hp pump ends to produce the performance of a 3 Hp pump.

5. SubDrive Constant Pressure Controller • The CP Water – SubDrive 300 is the latest addition to the CP Water family of SubDrives. • The SubDrive 300 provides constant water pressure through variable speed control of a 3 or 5 Hp - 4”& 6” pump ends to produce the performance of a 5 Hp pump curve.

6. SubDrive Constant Pressure System

7. SubDrive

8. SubDrive • Application Data

9. Application Data • CP Water – SubDrive 75 is designed for use with a ¾ Hp pump mounted to a 1½ Hp 3 phase Franklin Electric motor. 1 Hp and 1½ Hp pump end may also be used. • This innovation variable speed controller is designed for applications with a wide range of flow demand, includes large homes, ground source heat pumps, restaurants, bed & breakfast and sprinkler systems. • CP Water SubDrive 75 is UL recognized for U.S.A. and Canada.

10. Application Data • CP Water – SubDrive 150 is designed for use in residential or light commercial applications with a 1½ Hp pump mounted to a 3 Hp Franklin Electric 3-phase motor. 2 Hp and 3 Hp pump end may be used. • Ideal for multi home and irrigation applications.

11. Application Data • CP Water – SubDrive 300 is designed for use in residential or light commercial applications with a 3 Hp pump mounted to a 5 Hp Franklin Electric 3-phase motor. 5 Hp pump end may be used. • For flows of up to 90 gpm

12. SubDrive • Application Data • Specifications

13. Specifications • Input (from power source) • Voltage 190 – 260V 1-phase • Frequency 60/50 Hz • Amps (RMS) SD75 11A, SD150 23A, SD300 36A • Output (to motor) • Voltage Variable / 3-Phase • Frequency Variable (30-80 Hz) • Amps (RMS) SD75 5.9A, SD150 10.9A, SD300 17.8A

14. Specifications

15. SubDrive • Application Data • Specifications • Features & Benefits

16. Features & Benefits • Constant water pressure with a wide range of settings (25 to 80 psi). Better than city pressure. 50 psi factory setting. • Soft start feature prevents water hammer and increases motor life. • Less stress & torque on riser pipe. • Works with small pressure tanks or with larger tanks already in place.

17. Features & Benefits • UL recognized for U.S. and Canada. • Smart Reset technology allows well recovery before restarting the pump. • Single-phase input power with three-phase motor performance (SD75, SD150, SD300)

18. Features & Benefits • Works with a small pressure tank or larger tanks already in place. • Minimum tank volume: 2 gallons. • With 3 phase motor, no need to pull the pump. • Excellent radio frequency interference shielding. • Less inrush current = longer motor life.

19. Features & Benefits • Less operating cost • Uses only the horse power required • Reduced wire size (SD75, 150, 300) due to 3-phase. I.E. 350 Ft length: • 3Hp 230V single phase #8 • 3Hp 230V three phase #12

20. Features & Benefits • Wide range of input voltages allowable • Easy to install

21. $2, 951.60 Standard System SubDrive System $2,875.96

22. CP SUBDRIVE SIZING

23. CP SUBDRIVE SIZING

24. CP SUBDRIVE SIZING