1 / 58

Delivery, Forwarding, and Routing of IP Packets: A Comprehensive Guide

This chapter explores the different types of delivery and connections, forwarding techniques in classful and classless addressing, and how a routing table works. Learn the essentials for efficient packet delivery and routing in TCP/IP networks.

mathis
Download Presentation

Delivery, Forwarding, and Routing of IP Packets: A Comprehensive Guide

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chapter 6 Delivery, Forwarding, and Routing of IP Packets Objectives Upon completion you will be able to: • Understand the different types of delivery and the connection • Understand forwarding techniques in classful addressing • Understand forwarding techniques in classless addressing • Understand how a routing table works • Understand the structure of a router TCP/IP Protocol Suite

  2. 6.1 DELIVERY The network layer supervises delivery, the handling of the packets by the underlying physical networks. Two important concepts are the type of connection and direct versus indirect delivery. The topics discussed in this section include: Connection Types Direct Versus Indirect Delivery TCP/IP Protocol Suite

  3. Note: IP is a connectionless protocol. TCP/IP Protocol Suite

  4. Figure 6.1Direct delivery TCP/IP Protocol Suite

  5. Figure 6.2Indirect delivery TCP/IP Protocol Suite

  6. 6.2 FORWARDING Forwarding means to place the packet in its route to its destination. Forwarding requires a host or a router to have a routing table. . The topics discussed in this section include: Forwarding Techniques Forwarding with Classful Addressing Forwarding with Classless Addressing Combination TCP/IP Protocol Suite

  7. Figure 6.3Next-hop method TCP/IP Protocol Suite

  8. Figure 6.4Network-specific method TCP/IP Protocol Suite

  9. Figure 6.5Host-specific routing TCP/IP Protocol Suite

  10. Figure 6.6Default routing TCP/IP Protocol Suite

  11. Figure 6.7Simplified forwarding module in classful address without subnetting TCP/IP Protocol Suite

  12. Example 1 Figure 6.8 shows an imaginary part of the Internet. Show the routing tables for router R1. See Next Slide TCP/IP Protocol Suite

  13. Figure 6.8Configuration for routing, Example 1 TCP/IP Protocol Suite

  14. Example 1 (Continued) Solution Figure 6.9 shows the three tables used by router R1. Note that some entries in the next-hop address column are empty because in these cases, the destination is in the same network to which the router is connected (direct delivery). In these cases, the next-hop address used by ARP is simply the destination address of the packet as we will see in Chapter 7. See Next Slide TCP/IP Protocol Suite

  15. Figure 6.9Tables for Example 1 TCP/IP Protocol Suite

  16. Example 2 Router R1 in Figure 6.8 receives a packet with destination address 192.16.7.14. Show how the packet is forwarded. SolutionThe destination address in binary is 11000000 00010000 00000111 00001110. A copy of the address is shifted 28 bits to the right. The result is 00000000 00000000 00000000 00001100 or 12. The destination network is class C. The network address is extracted by masking off the leftmost 24 bits of the destination address; the result is 192.16.7.0. The table for Class C is searched. The network address is found in the first row. The next-hop address 111.15.17.32. and the interface m0 are passed to ARP. TCP/IP Protocol Suite

  17. Example 3 Router R1 in Figure 6.8 receives a packet with destination address 167.24.160.5. Show how the packet is forwarded. SolutionThe destination address in binary is 10100111 00011000 10100000 00000101. A copy of the address is shifted 28 bits to the right. The result is 00000000 00000000 00000000 00001010 or 10. The class is B. The network address can be found by masking off 16 bits of the destination address, the result is 167.24.0.0. The table for Class B is searched. No matching network address is found. The packet needs to be forwarded to the default router (the network is somewhere else in the Internet). The next-hop address 111.30.31.18 and the interface number m0 are passed to ARP. TCP/IP Protocol Suite

  18. Figure 6.10Simplified forwarding module in classful address with subnetting TCP/IP Protocol Suite

  19. Example 4 Figure 6.11 shows a router connected to four subnets. See Next Slide TCP/IP Protocol Suite

  20. Example 4 (Continued) Note several points. First, the site address is 145.14.0.0/16 (a class B address). Every packet with destination address in the range 145.14.0.0 to 145.14.255.255 is delivered to the interface m4 and distributed to the final destination subnet by the router. Second, we have used the address x.y.z.t/n for the interface m4 because we do not know to which network this router is connected. Third, the table has a default entry for packets that are to be sent out of the site. The router is configured to apply the mask /18 to any destination address. TCP/IP Protocol Suite

  21. Figure 6.11Configuration for Example 4 TCP/IP Protocol Suite

  22. Example 5 The router in Figure 6.11 receives a packet with destination address 145.14.32.78. Show how the packet is forwarded. SolutionThe mask is /18. After applying the mask, the subnet address is 145.14.0.0. The packet is delivered to ARP with the next-hop address 145.14.32.78 and the outgoing interface m0. TCP/IP Protocol Suite

  23. Example 6 A host in network 145.14.0.0 in Figure 6.11 has a packet to send to the host with address 7.22.67.91. Show how the packet is routed. SolutionThe router receives the packet and applies the mask (/18). The network address is 7.22.64.0. The table is searched and the address is not found. The router uses the address of the default router (not shown in figure) and sends the packet to that router. TCP/IP Protocol Suite

  24. Note: In classful addressing we can have a routing table with three columns; in classless addressing, we need at least four columns. TCP/IP Protocol Suite

  25. Figure 6.12Simplified forwarding module in classless address TCP/IP Protocol Suite

  26. Example 7 Make a routing table for router R1 using the configuration in Figure 6.13. See Next Slide SolutionTable 6.1 shows the corresponding table. See the table after the figure. TCP/IP Protocol Suite

  27. Figure 6.13Configuration for Example 7 TCP/IP Protocol Suite

  28. Table 6.1 Routing table for router R1 in Figure 6.13 TCP/IP Protocol Suite

  29. Example 8 Show the forwarding process if a packet arrives at R1 in Figure 6.13 with the destination address 180.70.65.140. SolutionThe router performs the following steps: 1. The first mask (/26) is applied to the destination address. The result is 180.70.65.128, which does not match the corresponding network address. See Next Slide TCP/IP Protocol Suite

  30. Example 8 (Continued) 2. The second mask (/25) is applied to the destination address. The result is 180.70.65.128, which matches the corresponding network address. The next-hop address (the destination address of the packet in this case) and the interface number m0 are passed to ARP for further processing. TCP/IP Protocol Suite

  31. Example 9 Show the forwarding process if a packet arrives at R1 in Figure 6.13 with the destination address 201.4.22.35. SolutionThe router performs the following steps: See Next Slide TCP/IP Protocol Suite

  32. Example 9 (Continued) 1. The first mask (/26) is applied to the destination address. The result is 201.4.22.0, which does not match the corresponding network address (row 1). 2. The second mask (/25) is applied to the destination address. The result is 201.4.22.0, which does not match the corresponding network address (row 2). 3. The third mask (/24) is applied to the destination address. The result is 201.4.22.0, which matches the corresponding network address. The destination address of the package and the interface number m3 are passed to ARP. TCP/IP Protocol Suite

  33. Example 10 Show the forwarding process if a packet arrives at R1 in Figure 6.13 with the destination address 18.24.32.78. SolutionThis time all masks are applied to the destination address, but no matching network address is found. When it reaches the end of the table, the module gives the next-hop address 180.70.65.200 and interface number m2 to ARP. This is probably an outgoing package that needs to be sent, via the default router, to some place else in the Internet. TCP/IP Protocol Suite

  34. Example 11 Now let us give a different type of example. Can we find the configuration of a router, if we know only its routing table? The routing table for router R1 is given in Table 6.2. Can we draw its topology? See Next Slide TCP/IP Protocol Suite

  35. Table 6.2 Routing table for Example 11 TCP/IP Protocol Suite

  36. Example 11 (Continued) SolutionWe know some facts but we don’t have all for a definite topology. We know that router R1 has three interfaces: m0, m1, and m2. We know that there are three networks directly connected to router R1. We know that there are two networks indirectly connected to R1. There must be at least three other routers involved (see next-hop column). We know to which networks these routers are connected by looking at their IP addresses. So we can put them at their appropriate place. See Next Slide TCP/IP Protocol Suite

  37. Example 11 (Continued) We know that one router, the default router, is connected to the rest of the Internet. But there is some missing information. We do not know if network 130.4.8.0 is directly connected to router R2 or through a point-to-point network (WAN) and another router. We do not know if network140.6.12.64 is connected to router R3 directly or through a point-to-point network (WAN) and another router. Point-to-point networks normally do not have an entry in the routing table because no hosts are connected to them. Figure 6.14 shows our guessed topology. See Next Slide TCP/IP Protocol Suite

  38. Figure 6.14Guessed topology for Example 6 TCP/IP Protocol Suite

  39. Figure 6.15Address aggregation TCP/IP Protocol Suite

  40. Figure 6.16Longest mask matching TCP/IP Protocol Suite

  41. Example 12 As an example of hierarchical routing, let us consider Figure 6.17. A regional ISP is granted 16384 addresses starting from 120.14.64.0. The regional ISP has decided to divide this block into four subblocks, each with 4096 addresses. Three of these subblocks are assigned to three local ISPs, the second subblock is reserved for future use. Note that the mask for each block is /20 because the original block with mask /18 is divided into 4 blocks. See Next Slide TCP/IP Protocol Suite

  42. Figure 6.17Hierarchical routing with ISPs TCP/IP Protocol Suite

  43. Example 12 (Continued) The first local ISP has divided its assigned subblock into 8 smaller blocks and assigned each to a small ISP. Each small ISP provides services to 128 households (H001 to H128), each using four addresses. Note that the mask for each small ISP is now /23 because the block is further divided into 8 blocks. Each household has a mask of /30, because a household has only 4 addresses (232−30 is 4). The second local ISP has divided its block into 4 blocks and has assigned the addresses to 4 large organizations (LOrg01 to LOrg04). Note that each large organization has 1024 addresses and the mask is /22. See Next Slide TCP/IP Protocol Suite

  44. Example 12 (Continued) The third local ISP has divided its block into 16 blocks and assigned each block to a small organization (SOrg01 to SOrg15). Each small organization has 256 addresses and the mask is /24. There is a sense of hierarchy in this configuration. All routers in the Internet send a packet with destination address 120.14.64.0 to 120.14.127.255 to the regional ISP. The regional ISP sends every packet with destination address 120.14.64.0 to 120.14.79.255 to Local ISP1. Local ISP1 sends every packet with destination address 120.14.64.0 to 120.14.64.3 to H001. TCP/IP Protocol Suite

  45. 6.3 ROUTING Routing deals with the issues of creating and maintaining routing tables. The topics discussed in this section include: Static Versus Dynamic Routing Tables Routing Table TCP/IP Protocol Suite

  46. Figure 6.18Common fields in a routing table TCP/IP Protocol Suite

  47. Example 13 One utility that can be used to find the contents of a routing table for a host or router is netstat in UNIX or LINUX. The following shows the listing of the contents of the default server. We have used two options, r and n. The option r indicates that we are interested in the routing table and the option n indicates that we are looking for numeric addresses. Note that this is a routing table for a host, not a router. Although we discussed the routing table for a router throughout the chapter, a host also needs a routing table. See Next Slide TCP/IP Protocol Suite

  48. Example 13 (continued) $ netstat -rnKernel IP routing table Destination Gateway Mask Flags Iface 153.18.16.0 0.0.0.0 255.255.240.0 U eth0 127.0.0.0 0.0.0.0 255.0.0.0 U lo 0.0.0.0 153.18.31. 254 0.0.0.0 UG eth0. See Next Slide TCP/IP Protocol Suite

  49. Example 13 (continued) More information about the IP address and physical address of the server can be found using the ifconfig command on the given interface (eth0). $ ifconfig eth0 eth0 Link encap:Ethernet HWaddr 00:B0:D0:DF:09:5D inet addr:153.18.17.11 Bcast:153.18.31.255 Mask:255.255.240.0 .... From the above information, we can deduce the configuration of the server as shown in Figure 6.19. See Next Slide TCP/IP Protocol Suite

  50. Figure 6.19Configuration of the server for Example 13 TCP/IP Protocol Suite

More Related