1 / 44

PRECISION MACHINING ● TOOLING ● ENGINEERING

H. & S. Swansons’ Tool Company. PRECISION MACHINING ● TOOLING ● ENGINEERING. Example of our “VERTICAL INTEGRATION” capabilities. Machined, chromated, assembled and painted in-house. Cast Aluminum Chassis.

mbrandon
Download Presentation

PRECISION MACHINING ● TOOLING ● ENGINEERING

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. H. & S. Swansons’ Tool Company PRECISION MACHINING ● TOOLING ● ENGINEERING

  2. Example of our “VERTICAL INTEGRATION” capabilities

  3. Machined, chromated, assembled and painted in-house Cast Aluminum Chassis

  4. Sensor Bases hogged out of aluminum. Laser Gyro’s are mounted in them for various guidance systems used in military and commercial aircraft.

  5. Various Aluminum Hog Outs

  6. Housings machined from steel castings

  7. Electrical control housings used in military and commercial aircraft as well as the GMLRS system.

  8. Titanium nodes for the Space Station with walls of only .010”

  9. Machined from a steel casting Bearing Carrier.

  10. Ground plane cover for the F-16 Radar System.

  11. FLIR Housing made from a hog out for the AH-64 and RAH 66 Helicopter.

  12. STATOR - turned, broached, marked, balanced, vertically machined.

  13. AluminumHog Out Manifold & End Cap

  14. Aluminum casting used on Jet Engines.

  15. Manifold cap hog-out from solid Aluminum.

  16. Bolt retainer machined from 4130 steel, cad or zinc plated.

  17. Manifold hog-out from solid Aluminum bar.

  18. Brake housing hog-out from a 7075 aluminum forging.

  19. Aluminum chassis hog-out from solid plate 4” thick.

  20. Aluminum hog-out from solid

  21. Aluminum hog-out from solid, 14” X 24” X 31/2”

  22. Laser chassis hog-out from solid aluminum.

  23. Laser housing machined from an aluminum investment casting.

  24. Hog-out aluminum cover

  25. Laser gyro sensor blocks machined, chromated, anodized and assembled

  26. Manifold hog-out from aluminum.

  27. Aluminum hog-out.

  28. Aluminum front panelmachined, painted,assembled and marked.

  29. Machined aluminum, gold plated.

  30. Aluminum, jet engine FEDEC control chassis.

  31. Aluminum, jet engine FADEC control chassis.

  32. Transmission plate machined from aluminum plate.

  33. 7075 aluminum hog-out for the MLRS Launcher.

  34. Aluminum heat sink cover

  35. Large aluminum investment casting, machined, painted, assembled and marked.

  36. First Rough Operation Billet – 417 lbs. Piston Housing

  37. Piston Housing Finished – Weight 37 lbs.

  38. Torque Stator Tube Semi-finished

  39. Carrier With brass bushing. Finished - Painted

  40. Aluminum Hog Out Finished Machined and Roller Burnished Inner Wheel Finished and Painted

  41. Flexible Machining System 3 Toyoda FA 450 II Horizontal Machining centers interconnected with rail guided vehicle and 16, 22” square pallets in a stacker system equipped with 200 tool magazines, 14,000 RPM spindles, 1891 IPM rapid feed rates, Renishaw probing, through-spindle coolant, linear scales and travels of X= 3.6”, Y=22.6” and Z=22.0”

  42. Flexible Machining Cell 3 Toyoda FA 630 Horizontal Machining centers interconnected with rail guided vehicle and 24 24.8” square pallets, each machine equipped with up to 190 tools, 15000 RPM spindles, 1471 IPM feed rates. Renishaw probing. 39.4” X 33.5” Y X 30” Z.

More Related