1 / 19

Fiber Optic Environmental and Structural Monitoring for Active Pixel Detectors

This presentation discusses the setup and preliminary results of a fiber optic monitoring system for active pixel detectors. The system measures temperature, humidity, and displacement in order to provide accurate environmental and structural data. The system is being tested in a thermo-mechanical mock-up and has potential applications in the Beast II test beam.

mccloud
Download Presentation

Fiber Optic Environmental and Structural Monitoring for Active Pixel Detectors

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. R&D LINE ON ACTIVE PIXEL DETECTORSP1.6 Fiber optic enviromental and structural vertex monitor. Ciemat, October 27th D. Moya, I. Vila, A. L. Virto., J.González • Instituto de Física de Cantabria (CSIC-UC) G. Carrión, M. Frövel. • InstitutoNacional de TécnicaAeronautica (INTA)

  2. Outline • FOS in DESY’s thermo-mechanical mock-up. • Fibers Set-up • Preliminary and partial results • Beast II • Test Beam monitoring • Beast final schedule moyad@ifca.unican.es, 9th VXD workshop, Sep 8th,2015, Trieste.

  3. FOS in DESY’s thermo-mechanical mock-up. moyad@ifca.unican.es, 9th VXD workshop, Sep 8th,2015, Trieste.

  4. Mock-up: FOS set-up moyad@ifca.unican.es, 9th VXD workshop, Sep 8th,2015, Trieste.

  5. Mock-up: FOS set-up:Fibres moyad@ifca.unican.es, 9th VXD workshop, Sep 8th,2015, Trieste.

  6. Mock-up: Monitor FOS position Fiber 53 Ladder 2.5 Fiber 39 Fiber 52 Ladder 2.11 Fiber 51 moyad@ifca.unican.es, 9th VXD workshop, Sep 8th,2015, Trieste.

  7. Mock-up: Reference FOS position Ref2_1548 temperaturereference Humidity Reference Fiber 43, 44 moyad@ifca.unican.es, 9th VXD workshop, Sep 8th,2015, Trieste.

  8. Mock-up: First results: Temperature monitoring S4 S1 S2 S3 F52 • Temperature monitoring F51 sensors during thermal test. F51 moyad@ifca.unican.es, 9th VXD workshop, Sep 8th,2015, Trieste.

  9. First results: Humidity Reference Fiber • Humidity reference sensor measures accurately Humidity change when the dry volume is open after temperature effect compensation Underthermalstabilityconditions moyad@ifca.unican.es, 9th VXD workshop, Sep 8th,2015, Trieste.

  10. Mock-up: F39 Stress problems Fiber cable manipulation ( outside the dry volume) • Fiber 39 ( sensitive to temperature and humidity) stressed, problems disentangling humidity effect. Fiberreleased Fiberreleasedagain moyad@ifca.unican.es, 9th VXD workshop, Sep 8th,2015, Trieste.

  11. Mock-up: F51-F52 Stress problems • F52 and F51 seems to be a little bit stressed ( not comparable with F39, only about 30 pm effect) moyad@ifca.unican.es, 9th VXD workshop, Sep 8th,2015, Trieste.

  12. FOS forBeas II moyad@ifca.unican.es, 9th VXD workshop, Sep 8th,2015, Trieste.

  13. Beast II- 2016 Test Beam • Beast II have been delayed ( commissioning of BEAST II February 2017??) • Next year Beast II silicon sensors will be proved in a Test Beam at Desy (april 2016??) • Proposal for integration of FBG fibers in FANGS (FE-I4 ATLAS Near Gamma Sensors) in order to measure temperature and humidity during test beam. 2 fiberswithseveralsensorsalongthealuminiumframe moyad@ifca.unican.es, 9th VXD workshop, Sep 8th,2015, Trieste.

  14. Beast-II monitoring with fibers • Temperature + humidity measurements on FANGS Stave support ( similar to the proposed for TB). • Temperature measurement along Beam Pipe on different points • Beam pipe – cartridge relative radial vibration measurement using L-shapes. moyad@ifca.unican.es, 9th VXD workshop, Sep 8th,2015, Trieste.

  15. Beast-II monitoring with fibers moyad@ifca.unican.es, 9th VXD workshop, Sep 8th,2015, Trieste.

  16. Beast-II Hardware • Temperature and Humidity measurements: • Fibers geometry must be defined and fibers the must be ordered and delivered (4 months) • Once fibers received they must be prepared and calibrated with temperature and humidity (2 months) • Fibers fixation must be studied carefully (2 months) • Displacements / Vibrations measurements • L-shapes are manufactured • The clamp must be design, and the contact ball must be glued (1 month) • L-shapes must be tested with humidity ( 3-4 days test) (2 weeks) • L-shapes calibration (2 weeks) moyad@ifca.unican.es, 9th VXD workshop, Sep 8th,2015, Trieste.

  17. Beast-II Software • In collaboration with Michael Ritcher: Readout integrated in epics similar to 2014 test beam ( it is expected to be integrated smoothly) • Temperature and humidity and displacement measurements not a problem • Study the possibility of measuring vibrations with L-shapes: • Interrogation speed 1 KHz. Write 1 frequency spectrum each 60 seconds with 0.1hz resolution (0-500 Hz ,5000 points) moyad@ifca.unican.es, 9th VXD workshop, Sep 8th,2015, Trieste.

  18. FOS schedule for Beast-II moyad@ifca.unican.es, 9th VXD workshop, Sep 8th,2015, Trieste.

  19. Conclusions • First Depfet mock-up results: FBG fibers seems to be feasible to measure temperature and humidity • Temperature fibers must be prepared more carefully or use acrylate fibers in order to avoid humidity sensitivity • Fibers locking must be studied very carefully in order to avoid stress effect. • For next year some fibers positioned in the FANGS aluminum support structure ( a hole can be made all along the stave for fibers positioning) in order to measure temperature and humidity during Test beam. • A first proposal for beast II temperature, humidity and displacement monitoring have been presented. More iterations needed with Depfet collaboration in order to define the final system. moyad@ifca.unican.es, 9th VXD workshop, Sep 8th,2015, Trieste.

More Related