1 / 7

QF Manifold Harness Test

QF Manifold Harness Test. QF Manifold Harness Test.

meaghan-hamilton
Download Presentation

QF Manifold Harness Test

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. QF Manifold Harness Test

  2. QF Manifold Harness Test To test the cable:1) Disconnect the cables from the L5000Plus/XL & Manifold2) On crimped terminal end side check resistances between     RED and WHITE  =  approx 75K (Resistance Test #1)    WHITE and BLACK  =  Approx 19K (Resistance Test #2)3) Check transistor    (Put meter on continuity test (this is ohms with sounder mode) RED meter probe to WHITE CRIMPED SIDE       i) Collector Base Test- place the BLACK probe on the WHITE cable MOLEX side. You should read about 500ohms to 1K ohms (or .63 volts if meter reads out in voltage).      ii) Emitter Base Test - move the Black probe cable to the BLACK cable on the MOLEX side. You should read about 500ohms to 1K ohms(or .63 volts if meter reads out in voltage).4) Emitter Collector Test - Check resistance between white and black on molex connector - Should read around 3.3 Mohm (or OL).

  3. Resistance Test #1

  4. Resistance Test #2

  5. Collector Base Test

  6. Emitter Base Test

  7. Emitter Collector Test

More Related