1 / 40

Decline Curve Analysis For Unconventional Reservoir Systems — Variable Pressure Drop Case

MS Thesis Defense — Fall 2016 College Station, TX (USA) — 21 October 2016. Decline Curve Analysis For Unconventional Reservoir Systems — Variable Pressure Drop Case. Patrick COLLINS Department of Petroleum Engineering Texas A&M University College Station, TX 77843-3116 (USA)

medinar
Download Presentation

Decline Curve Analysis For Unconventional Reservoir Systems — Variable Pressure Drop Case

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. MS Thesis Defense — Fall 2016 College Station, TX (USA) — 21 October 2016 Decline Curve Analysis For Unconventional Reservoir Systems — Variable Pressure Drop Case Patrick COLLINS Department of Petroleum Engineering Texas A&M University College Station, TX 77843-3116 (USA) +1.214.535.5267 pcollins@tamu.edu MS Thesis Defense — Fall 2016 Decline Curve Analysis for Unconventional Reservoir Systems — Variable Pressure Drop Case Patrick COLLINS — Texas A&M University (21 October 2016)

  2. Presentation Outline Diagnostics • Outline • Brief Biography • Rationale For This Work • Workflow Development • Validation of The Methodology • Application of the Methodology • Summary, Conclusions, and Future Work Calibration Forecasting MS Thesis Defense — Fall 2016 Decline Curve Analysis for Unconventional Reservoir Systems — Variable Pressure Drop Case Patrick COLLINS — Texas A&M University (21 October 2016)

  3. Brief Biography • Born (November 1989) and raised in the Dallas/Fort Worth (DFW) area. • B.S. in Ocean Engineering from Texas A&M University in 2012. • Began pursuing M.S. in Petroleum Engineering in the Fall of 2012. • Began working at DeGolyer and MacNaughton in Spring of 2013 while completing coursework and thesis remotely. • Focus is on reservoir studies and reserve evaluations in worldwide tight and unconventional plays. MS Thesis Defense — Fall 2016 Decline Curve Analysis for Unconventional Reservoir Systems — Variable Pressure Drop Case Patrick COLLINS — Texas A&M University (21 October 2016)

  4. Rationale For This Work • Decline curve analysis (DCA) requires constant bottomhole pressure conditions throughout the producing life of the well for meaningful rate extrapolations. • Invalid assumptions bring the applicability of time-rate decline equations into question and methods to accommodate pressure variations are needed. • Data quality, model non-uniqueness/uncertainty, as wells as time constraints often preclude the effective use of model-based production analysis techniques for incorporating flowing pressures. • This work proposes a workflow that combines the convolution principle with recently developed empirical rate decline equations to account for pressure changes during production. MS Thesis Defense — Fall 2016 Decline Curve Analysis for Unconventional Reservoir Systems — Variable Pressure Drop Case Patrick COLLINS — Texas A&M University (21 October 2016)

  5. Time-Rate Decline Curve Analysis (DCA): Assumptions • Extrapolation of the best-fit curve through the current or historical production data is an accurate model for future production trends. • There will be no significant changes in current operating conditions or field development that might affect the curve fit and the subsequent extrapolation into the future. • Well production is from an unchanging drainage area with no-flow boundaries (Arps' Assumption) • Major assumption: The well is producing against a constant bottomhole flowing pressure. MS Thesis Defense — Fall 2016 Decline Curve Analysis for Unconventional Reservoir Systems — Variable Pressure Drop Case Patrick COLLINS — Texas A&M University (21 October 2016)

  6. Time-Rate DCA: Empirical Model Comparison Transient Flow Rate Match DCA Model Legend: Modified Hyperbolic: HYP Power-law Exponential: PLE Stretched Exponential: SEM Duong: DNG Logistic Growth: LGM Terminal Forecasts • Discussion: • Each decline relation is for a specific flow regime and/or operating condition. • During transient flow many/most models will match data — forecasts vary widely. • Each empirical model implicitly assumes a constant bottomhole flowing pressure. MS Thesis Defense — Fall 2016 Decline Curve Analysis for Unconventional Reservoir Systems — Variable Pressure Drop Case Patrick COLLINS — Texas A&M University (21 October 2016)

  7. Time-Rate DCA: Derivative Diagnostic Methods D-parameter: b-parameter: • Discussion: • Derivative trends used to address non-uniqueness in model matches. • Focus is on transient flow behavior. • OBSERVATION of power-law flow derivative trends has led to new DCA relations. MS Thesis Defense — Fall 2016 Decline Curve Analysis for Unconventional Reservoir Systems — Variable Pressure Drop Case Patrick COLLINS — Texas A&M University (21 October 2016)

  8. Time-Rate DCA: Variable Pressure • Discussion: • Choke/pressure management is typical for unconventional reservoirs. • Lack of a rate decline signature makes time-rate analysis challenging. • Model-based production analysis (TRP) is more data reliant and time consuming. MS Thesis Defense — Fall 2016 Decline Curve Analysis for Unconventional Reservoir Systems — Variable Pressure Drop Case Patrick COLLINS — Texas A&M University (21 October 2016)

  9. Model-based Production Analysis: Theory Constant Rate Solution Variable-RateCase: “Log-log” Diagnostic Plot: Variable-Pressure DropCase: Constant Pressure Solution • Discussion: • Model-based production analysis (TRP) uses a specified well/reservoir model. • Workflow: • Data QC, • Diagnostic calibration (PI/Blasingame Plot), • History matching rate AND pressure data, and • Scenario forecasting. • Superposition is an exact — linearity is required (pseudopressure transform). MS Thesis Defense — Fall 2016 Decline Curve Analysis for Unconventional Reservoir Systems — Variable Pressure Drop Case Patrick COLLINS — Texas A&M University (21 October 2016)

  10. Time-Rate-Pressure DCA: Proposed Methodology "qDb“ Diagnostic Plot: Variable-Pressure DropCase: Constant Pressure Solution Constant Pressure Solution Proxy (PLE model shown): • Discussion: • Proposed methodology: • Empirical decline curve analysis based on the q/Δpfunction. • Apply superposition to yield a variable-pressure rate solution. • Project solution to yield forecast and EUR scenarios. • Methodology steps: • Step 1: Diagnostics • Step 2: Calibration • Step 3: Forecasting MS Thesis Defense — Fall 2016 Decline Curve Analysis for Unconventional Reservoir Systems — Variable Pressure Drop Case Patrick COLLINS — Texas A&M University (21 October 2016)

  11. Workflow Development: Step #1 — Diagnostics Modified Loss-Ratio: Modified Loss-Ratio Derivative: Pseudopressure: Pseudopressure w/k(p): • Discussion: • "STEP 1"(Derivatives) Calculation of the derivative functions (i.e., D(t) and b(t)). • Pseudopressure transformations used for non-linearities (gas and k(p)). • Assume that q(t)/Δp(t) is a proxy for the constant pressure rate model. MS Thesis Defense — Fall 2016 Decline Curve Analysis for Unconventional Reservoir Systems — Variable Pressure Drop Case Patrick COLLINS — Texas A&M University (21 October 2016)

  12. t ∫ = dt x 0 Workflow Development: Step #2 — Calibration (Base Rates and Pressures) (Bottomhole Pressure Drop) qD,cpproxy (q/Δp model) • Discussion: • "STEP 2" (Calibration/Superposition) is the convolution (superposition) of variable-pressure drop data using a calibrated pressure drop normalized decline equation. • The calculated D(t) and b(t) parameter trends are used to calibrate model parameters. • Any pressure drop normalized decline expression (model) can be used as a qD,cpproxy (i.e., reservoir model for a well produced at a constant pressure). (Computed Flowrates) MS Thesis Defense — Fall 2016 Decline Curve Analysis for Unconventional Reservoir Systems — Variable Pressure Drop Case Patrick COLLINS — Texas A&M University (21 October 2016)

  13. Workflow Development: Step #2 — Calibration Empirical RelationD(t) Models b(t) Models • Modified-Hyperbolic • Power-Law Exponential • Stretched-Exponential • Duong • Logistic Growth MS Thesis Defense — Fall 2016 Decline Curve Analysis for Unconventional Reservoir Systems — Variable Pressure Drop Case Patrick COLLINS — Texas A&M University (21 October 2016)

  14. Workflow Development: Step #2 — Calibration General Variable Pressure Convolution Equation: Superposition Using the Pressure Drop Normalized Decline Relations: MS Thesis Defense — Fall 2016 Decline Curve Analysis for Unconventional Reservoir Systems — Variable Pressure Drop Case Patrick COLLINS — Texas A&M University (21 October 2016)

  15. Workflow Development: Step #3 — Forecasting • Discussion: • "STEP 3" (Forecasting) is the selection of the future pressure schedule. • Sensitivity cases are generated using prescribed pressure drawdown scenarios. • Validation across a range of diagnostic plots is strongly recommend. MS Thesis Defense — Fall 2016 Decline Curve Analysis for Unconventional Reservoir Systems — Variable Pressure Drop Case Patrick COLLINS — Texas A&M University (21 October 2016)

  16. Validation Example #1: Black Oil [Diagnostics] • Discussion: • Black oil scenario was simulated to generate pressure data from near constant rates in order to validate variable pressure decline methodology. • A multi-fractured horizontal well producing from a homogeneous reservoir system was discretized in a numerical commercial flow simulator. • System parameters where chosen to reflect common field values . MS Thesis Defense — Fall 2016 Decline Curve Analysis for Unconventional Reservoir Systems — Variable Pressure Drop Case Patrick COLLINS — Texas A&M University (21 October 2016)

  17. Validation Example #1: Black Oil [Calibration] • Discussion: • Simulated response represents linear flow as expected based on model inputs. • Calibrated diagnostic models adequately capture simulated historical data trends. • Utilization of the convolution integral with the calibrated empirical models and pressure drop data adequately captured the simulated historical rate trend. Parameter Summary MS Thesis Defense — Fall 2016 Decline Curve Analysis for Unconventional Reservoir Systems — Variable Pressure Drop Case Patrick COLLINS — Texas A&M University (21 October 2016)

  18. Validation Example #1: Black Oil [Forecasting] Forecasting Sensitivities Recovery Results • Discussion: • The final step of the validation process is to impose pressure extrapolation schedules to investigate their effect on the projected oil flowrates. • Additional pressure drawdown clearly resulted in a corresponding period of sustained oil flowrates. • The average thirty year estimated ultimate recovery uplift for all models is ≈ 60% due to increased pressure drawdown of ≈ 2,750 psia. MS Thesis Defense — Fall 2016 Decline Curve Analysis for Unconventional Reservoir Systems — Variable Pressure Drop Case Patrick COLLINS — Texas A&M University (21 October 2016)

  19. Validation Example #2: Dry Gas [Diagnostics] • Discussion: • Dry gas scenario aims to introduce additional complexity by introducing compressible flow as a non-linearity . • Pseudopressure transformations are used to satisfy the linearity requirement of superposition. • A multi-fracture horizontal well system was again simulated. MS Thesis Defense — Fall 2016 Decline Curve Analysis for Unconventional Reservoir Systems — Variable Pressure Drop Case Patrick COLLINS — Texas A&M University (21 October 2016)

  20. Validation Example #2: Dry Gas [Calibration] • Discussion: • Pseudopressure drop normalized gas flowrate signature indicates linear flow as expected based on inputs. • Each of the models adequately captures diagnostic plotting function trends throughout the history with differences early and late time. • Gas flowrate signature was captured using pseudopressure drop data in the superposition integral. Parameter Summary MS Thesis Defense — Fall 2016 Decline Curve Analysis for Unconventional Reservoir Systems — Variable Pressure Drop Case Patrick COLLINS — Texas A&M University (21 October 2016)

  21. Validation Example #2: Dry Gas [Forecasting] Forecasting Sensitivities Recovery Results • Discussion: • As with the black oil case, the rate projection is clearly impacted by the pressure assumption. • It is noted here that the forecasts do not incorporate boundary effects or changes in flow regimes (i.e. empirical models). • A ≈61% uplift in thirty year recovery is a substantial response resulting from significant pressure drawdown increase. MS Thesis Defense — Fall 2016 Decline Curve Analysis for Unconventional Reservoir Systems — Variable Pressure Drop Case Patrick COLLINS — Texas A&M University (21 October 2016)

  22. Validation Example #3: Dry Gas with k(p)[Diagnostics] • Discussion: • The final validation case attempts to test the workflow for the most complex scenario considered in this work, namely gas production incorporating pressure dependent permeability effects. • Very slight differences in model parameters from the dry gas validation example #2 are noted. MS Thesis Defense — Fall 2016 Decline Curve Analysis for Unconventional Reservoir Systems — Variable Pressure Drop Case Patrick COLLINS — Texas A&M University (21 October 2016)

  23. Validation Example #3: Dry Gas with k(p)[Calibration] • Discussion: • A clear power-law diagnostic behavior is noted in the diagnostic plotting functions. • With the exception of the MHYP relation very minimal differences in model behavior throughout time (history and forecast) are noted differing from other examples. • Adequate calibration matches result in a reasonable production match. Parameter Summary MS Thesis Defense — Fall 2016 Decline Curve Analysis for Unconventional Reservoir Systems — Variable Pressure Drop Case Patrick COLLINS — Texas A&M University (21 October 2016)

  24. Validation Example #3: Dry Gas with k(p)[Forecasting] Forecasting Sensitivities Recovery Results • Discussion: • The last historic flowing pressure along with an extrapolation schedule adding ≈ 2,500 psia in drawdown where used to calculate rate profile sensitivities. • Rate profiles responded as expected with an average thirty year EUR uplift of 36% compared to the 61% uplift for the dry gas validation example #2 . • Less pronounced performance uplift is likely due to the inclusion of the pressure dependent permeability relation within the pseudopressure transformation. • This will be expanded upon as a limitation for Application Examples #2 and #3. MS Thesis Defense — Fall 2016 Decline Curve Analysis for Unconventional Reservoir Systems — Variable Pressure Drop Case Patrick COLLINS — Texas A&M University (21 October 2016)

  25. Application Example #1: Shale Oil Well Near Constant pwf Production Data “qDb” Diagnostic Plot (1:2) • Discussion: • First application example represents a shale oil case nearing a constant bottomhole flowing pressure after a year under drawdown control. • The aim of this exercise is to generate forecasting sensitivities to help make a decision on the merits of further bottomhole pressure reduction as a result of installation of artificial lift. • Pressure drop normalized rate data exhibits approximately a half slope indicative of linear flow with D(t) and b(t) trends suggesting power-law behavior. MS Thesis Defense — Fall 2016 Decline Curve Analysis for Unconventional Reservoir Systems — Variable Pressure Drop Case Patrick COLLINS — Texas A&M University (21 October 2016)

  26. Application Example #1: Shale Oil Well Near Constant pwf • Discussion: • Each of the models is calibrated to the diagnostic plotting functions while simultaneously calibrating against the flowrate history. • Significant deviation in model behavior is evident as a result of differences in model characteristics . • Slight decline in b(t) trend suggests power-law behavior which is reflected in superior matches for PLE, SEM, and LGM models. Parameter Summary MS Thesis Defense — Fall 2016 Decline Curve Analysis for Unconventional Reservoir Systems — Variable Pressure Drop Case Patrick COLLINS — Texas A&M University (21 October 2016)

  27. Application Example #1: Shale Oil Well Near Constant pwf Forecasting Sensitivities Recovery Results • Discussion: • It is worthwhile noting that the time-rate-pressure data is highly consistent lending to ease in model calibration. • Noticeable rate response is evident due to additional decrease in bottomhole pressure into the future. • Thirty year EUR increase averages ≈ 25% across all of the models (PLE shown). • The variable pressure decline methodology provides a framework to quickly evaluate economic viability of different productivity enhancement measures. MS Thesis Defense — Fall 2016 Decline Curve Analysis for Unconventional Reservoir Systems — Variable Pressure Drop Case Patrick COLLINS — Texas A&M University (21 October 2016)

  28. Application Example #2: Oil Well with Bottomhole Gauge Production Data “qDb” Diagnostic Plot (1:2) • Discussion: • This exercise aims to emphasize the utility of high frequency bottomhole pressure measurements when performing well performance analysis. • The well in question exhibits approximately 75 days of drawdown management resulting in near constant oil flowrates after a period of post stimulation flowback. • Pressure dependent permeability due to in-situ geomechanics is a known phenomena in this formation necessitating pseudopressure transformations. • A clear linear flow trend is identified and used to calculate derivative plotting functions to be used for model calibration. MS Thesis Defense — Fall 2016 Decline Curve Analysis for Unconventional Reservoir Systems — Variable Pressure Drop Case Patrick COLLINS — Texas A&M University (21 October 2016)

  29. Application Example #2: Oil Well with Bottomhole Gauge • Discussion: • Reasonable diagnostic matches are obtained for all empirical models. • Final model parameters are typical of those obtained with traditional constant pressure decline curve analysis. • It is clear that the production data is highly consistent and an outstanding history match is obtained across the entire production history. Parameter Summary MS Thesis Defense — Fall 2016 Decline Curve Analysis for Unconventional Reservoir Systems — Variable Pressure Drop Case Patrick COLLINS — Texas A&M University (21 October 2016)

  30. Application Example #2: Oil Well with Bottomhole Gauge Forecasting Sensitivities Recovery Results • Discussion: • The variable pressure decline methodology provides a great utility in this particular scenario where the flowing bottomhole pressure is still quite a way from reaching a constant value. • Traditional decline curve forecasting assuming a constant bottomhole pressure would be incorrect or misleading at best in this particular scenario. • Utilizing superposition allows for the direct incorporation of additional pressure drawdown which would otherwise require more detailed model based analysis. • A fairly small average production increase of ≈ 23% compared to a large increase in drawdown (3,500 psia) is likely a result of pressure dependent permeability included in the pseudopressure transformation. MS Thesis Defense — Fall 2016 Decline Curve Analysis for Unconventional Reservoir Systems — Variable Pressure Drop Case Patrick COLLINS — Texas A&M University (21 October 2016)

  31. Application Example #3: HP/HT Shale Gas Well Production Data “qDb” Diagnostic Plot (1:2) (1:1) • Discussion: • The final single well application example is for a dry gas well producing from a high pressure-high temperature (HP/HT) shale reservoir system. • Significant geomechanical effects causing fracture conductivity loss and/or permeability degredation with pressure necessitate inclusion of k(p) within the pseudopressure transformation to achieve linearity for superposition. • This case is unique from the others due to its steady degredation in productivity over time evident by a marked departure from linear flow and power-law diagnostic trends. MS Thesis Defense — Fall 2016 Decline Curve Analysis for Unconventional Reservoir Systems — Variable Pressure Drop Case Patrick COLLINS — Texas A&M University (21 October 2016)

  32. Application Example #3: HP/HT Shale Gas Well • Discussion: • An outstanding match is achieved across all of the diagnostic calibration trends; however it is noted here that non-uniqueness is compounded by additional variables within k(p) expression (i.e.γ and ki) • Differences in empirical model characteristics are clearly observed. • Calibrated model parameters are in line steady productivity loss. Parameter Summary MS Thesis Defense — Fall 2016 Decline Curve Analysis for Unconventional Reservoir Systems — Variable Pressure Drop Case Patrick COLLINS — Texas A&M University (21 October 2016)

  33. Application Example #3: HP/HT Shale Gas Well Forecasting Sensitivities Recovery Results • Discussion: • The forecasting exercise for this example sought to consider four separate final drawdown assumptions for the well in question for each of the five models to try and bracket a range of ultimate recovery values. • Final Δp cases of 6,000 psia, 7,000 psia, 8,000 psia, and 9,000 psia where forecasted. • Very minimal rate response or recovery impact is observed as a result of the various drawdown sensitivities coming as the biggest surprise of all of the cases analyzed. • It was previously hypothesized, and again observed, that the inclusion of pressure dependent permeability when transforming pressures to pseudopressures is significantly impacting the methodologies applicability. MS Thesis Defense — Fall 2016 Decline Curve Analysis for Unconventional Reservoir Systems — Variable Pressure Drop Case Patrick COLLINS — Texas A&M University (21 October 2016)

  34. Application Example #3: HP/HT Shale Gas Well Pseudopressure w/k(p): k(p) Expression: • Discussion: • A plot of pressure drop versus pseudopressure drop for the application example in question was created for cases considering no pressure dependent permeability through significant permeability loss with pressure (high γvalues). • It is clear that the inclusion of pressure dependent permeability creates a scenario where significant increases in drawdown translate into insignificant increases in pseudopressure drawdown explaining the lack of impact of forecasting results. • Further linearization measures are likely required for high drawdown cases. MS Thesis Defense — Fall 2016 Decline Curve Analysis for Unconventional Reservoir Systems — Variable Pressure Drop Case Patrick COLLINS — Texas A&M University (21 October 2016)

  35. Application Example #4: Multiwell Type Curve Workflow Gas Flowrate vs. Production Time Flowing Pressurevs. Production Time • Discussion: • The aim of this exercise is to demonstrate a workflow for constructing type curves for undeveloped wells honoring diagnostic production signatures and incorporating variable drawdown operating conditions. • An eight well dataset was chosen to illustrate a group of wells where a portion of the wells are flowing against a near constant flowing pressure throughout the production history with the newer wells producing against variable pressure drop conditions. • A series of diagnostic plots aims to identify the characteristic reservoir signature for the well group in question. MS Thesis Defense — Fall 2016 Decline Curve Analysis for Unconventional Reservoir Systems — Variable Pressure Drop Case Patrick COLLINS — Texas A&M University (21 October 2016)

  36. Application Example #4: Multiwell Type Curve Workflow Raw Plotting Functions Normalized Plotting Functions MS Thesis Defense — Fall 2016 Decline Curve Analysis for Unconventional Reservoir Systems — Variable Pressure Drop Case Patrick COLLINS — Texas A&M University (21 October 2016)

  37. Application Example #4: Multiwell Type Curve Workflow Parameter Summary • Discussion: • Having identified an appropriate normalization scheme and analogous well group we are now able to calibrate a characteristic empirical profile. • The pressure drop normalized model profile honors the flow regimes observed and serves as a proxy for the constant pressure rate solution in the convolution integral allowing a range of pressure drop sensitivities. MS Thesis Defense — Fall 2016 Decline Curve Analysis for Unconventional Reservoir Systems — Variable Pressure Drop Case Patrick COLLINS — Texas A&M University (21 October 2016)

  38. Application Example #4: Multiwell Type Curve Workflow Pressure Extrapolation Senstivities Rate Forecast Type Curves • Discussion: • The final step is to calculate rate profiles according to a range of average pressure drawdown rates. • Clearly more aggressive drawdown management accelerates production while more conservative management results in lower initial rates with shallower decline behavior. • The thirty year recovery results are identical regardless of the drawdown scenario (ultimately same Δp). Recovery Results MS Thesis Defense — Fall 2016 Decline Curve Analysis for Unconventional Reservoir Systems — Variable Pressure Drop Case Patrick COLLINS — Texas A&M University (21 October 2016)

  39. Summary, Conclusions, and Future Work • The conceptual development of a decline curve analysis method-ology for the case of varying wellbore pressures is presented. • Superposition of any "empirical" rate decline relation to generate the rate response and forecast production under pressure constraints is proposed. • Diagnostic (D(t) and b(t) para-meter) plots are used for guidance in determining model parameters. • Prescribed pressure forecasts are used to generate a range of forecast results. • Limitations are observed with increasing system non-linearity notably high drawdown cases exhibiting geomechanical effects. • Methodology is applicable as a first order reservoir surveillance tool (i.e. data consistency verification). • Analytical derivation of empirical models should be persued. • Correlations between model parameters and reservoir parameters need to be investigated. MS Thesis Defense — Fall 2016 Decline Curve Analysis for Unconventional Reservoir Systems — Variable Pressure Drop Case Patrick COLLINS — Texas A&M University (21 October 2016)

  40. MS Thesis Defense — Fall 2016 College Station, TX (USA) — 21 October 2016 Decline Curve Analysis For Unconventional Reservoir Systems — Variable Pressure Drop Case End of Presentation Patrick COLLINS Department of Petroleum Engineering Texas A&M University College Station, TX 77843-3116 (USA) +1.214.535.5267 pcollins@tamu.edu MS Thesis Defense — Fall 2016 Decline Curve Analysis for Unconventional Reservoir Systems — Variable Pressure Drop Case Patrick COLLINS — Texas A&M University (21 October 2016)

More Related