1 / 36

Bloodborne Pathogens Standard

Learn about OSHA's Bloodborne Pathogens Standard and the Needlestick Safety and Prevention Act, including key provisions, definitions, exposure control plans, personal protective equipment, and more. Understand the timeline, revisions to the standard, and new definitions such as SESIP and needleless systems. Gain insights into safety devices and engineering controls, with a focus on reducing employee exposure and implementing safer medical devices. Access valuable resources for developing an effective exposure control plan and ensuring compliance.

meghannb
Download Presentation

Bloodborne Pathogens Standard

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. OSHA’s Bloodborne Pathogens Standard… and Needlestick Safety and Prevention Act… and the OSHA 300 Log

  2. Bloodborne Pathogens Standard Major Provisions by Paragraph (b) Definitions (c) Exposure Control Plan (ECP) (d) Engineering and Work Practice Controls - Personal Protective Equipment (PPE) (e) HIV and HBV Research Labs (f) Vaccination, Post-Exposure Follow-up (g) Labeling and Training (h) Recordkeeping

  3. Methods of Compliance • Universal Precautions • Engineering and Work Practice Controls • Personal protective equipment • Housekeeping

  4. Since 1991… • Advancements in medical technology • September 1998, OSHA’s Request for Information (RFI) • Findings of RFI • Union and Congressional involvement • November 1999, CPL 2-2.44D

  5. Needlestick Safety and Prevention Act, P.L. 106-430

  6. The Needlestick Safety and Prevention Act mandated… OSHA clarify and revise 29 CFR 1910.1030, the Bloodborne Pathogens Standard

  7. Needlestick Safety and Prevention Act Timeline • P. L. 106-430 signed; November 6, 2000 • Revised Standard published in Federal Register; Jan. 18, 2001 • Effective date; April 18, 2001 • Enforcement of new provisions; July 17, 2001 • Adoption in OSHA state-plan states; October 18, 2001

  8. Revisions to Standard • Additional definitions, paragraph (b) • New requirements in the Exposure Control Plan, paragraph (c) • Solicitation of input from non-managerial employees, paragraph (c) • Sharps injury log, paragraph (h)

  9. Additional Definitions1910.1030(b) • Engineering Controls - includes additional definitions and examples: • Sharps with Engineered Sharps Injury Protections - [SESIP] • Needleless Systems

  10. Engineering ControlsNew Definition “… means controls (e.g., sharps disposal containers, self-sheathing needles, safer medical devices, such as sharps with engineered sharps injury protections and needleless systems) that isolate or remove the bloodborne pathogens hazard from the workplace.”

  11. Needleless SystemsNew Definition • Device that does not use a needle for: • Collection of bodily fluids • Administration of medication/fluids • Any other procedure with potential percutaneous exposure to a contaminated sharp

  12. “SESIP”New Definition Non-needle sharp or a needle with a built-in safety feature or mechanism that effectively reduces the risk of an exposure incident.

  13. Hypodermic syringes with “Self-Sheathing” safety feature Self-sheathed protected position

  14. Hypodermic syringes with “Retractable Technology” safety feature Retracted protected position

  15. Phlebotomy needle with “Self-Blunting” safety feature Blunted protected position

  16. “Add-on” safety feature Attached to syringe needle Attached to blood tube holder

  17. Multi-dose Safer Needles

  18. Phlebotomy, non-compliance • Hot Topic

  19. Retracting lancets with safety features Before During After Before During After

  20. Disposable scalpels with safety features Retracted position Protracted position Protracted position

  21. Additional Information About Safety Devices Available At… www.med.virginia.edu/~epinet www.tdict.org www.ecri.org www.premierinc.com

  22. Exposure Control Plan:1910.1030(c)New Provisions The ECP must be updated to include: • changes in technology that reduce/eliminate exposure • annual documentation of consideration and implementation of safer medical devices • solicitation of input from non-managerial employees

  23. Solicitation of Non-Managerial EmployeesNew Provision • Identification, evaluation, and selection of engineering controls • Must select employees that are: • Responsible for direct patient care • Representative sample of those with potential exposure

  24. Engineering and Work Practice Controls: 1910.1030(d) Employers must select and implement appropriate engineering controls to reduce or eliminate employee exposure.

  25. “Where engineering controls will reduce employee exposure either by removing, eliminating, or isolating the hazard, they must be used.” CPL 2-2.44D

  26. Engineering and Work Practice Controls Selection of engineering and work practice controls is dependent on the employer’s exposure determination.

  27. Exposure Determination • The employer must: • Identify worker exposures to blood or OPIM • Review all processes and procedures with exposure potential • Re-evaluate when new processes or procedures are used

  28. Engineering and Work Practice Controls (con’t) • The employer must: • Evaluate available engineering controls (safer medical devices) • Train employees on safe use and disposal • Implement appropriate engineering controls/devices

  29. Engineering and Work Practice Controls (con’t) • The employer must: • Document evaluation and implementation in ECP • Review, update ECP at least annually • Review new devices and technologies annually • Implement new device use, as appropriate and available

  30. Engineering and Work Practice Controls (con’t) • The employer must: • Train employees to use new devices and/or procedures • Document in ECP

  31. New CDC RecommendationsCPL 2-2.69, Appendix E • Prevention • HBV vaccination • Antibody Test for ALL Healthcare Workers • ~25% non-responders • Prophylaxis • Rapid HIV Test

  32. Recordkeeping: 1910.1030(h) 1904.8 • Sharps Injury Log & OSHA 300 Log • Only mandatory for those keeping records under 29 CFR 1904 • Confidentiality is maintained for Needlesticks • On 300 Log – stick must be recorded but privacy cases are to be considered 1904.8 (a) & 1904.29(b)(6) – (b)(9)

  33. 1904.8 – Bloodborne Pathogens • Record all work-related needlesticks and cuts from sharp objects that are contaminated with another person’s blood or other potentially infectious material (includes human bodily fluids, tissues and organs; other materials infected with HIV or HBV such as laboratory cultures) • Record splashes or other exposures to blood or other potentially infectious material if it results in diagnosis of a bloodborne disease or meets the general recording criteria • An employer can use the 300 Log to meet the requirements for a sharps log. To do so, the employer must be able to segregate the sharps injury data and must include information on the type and brand of device that caused the injury.

  34. Sharps Injury Log At a minimum, the log must contain, for each incident: • Type and brand of device involved • Department or area of incident • Description of incident

  35. Summary of New Provisions • Additional definitions, paragraph (b) • New requirements in the Exposure Control Plan, paragraph (c) • Non-managerial employees involved in selection of controls, paragraph (c) • Sharps injury log, paragraph (h)

  36. National BBP Compliance Issues • Engineering Controls • Nuclear Medicine • Work Practices • Blood Tube Holders • Multi-Employer, Contractors • HBV Antibody Test

More Related