310 likes | 662 Views
Listeria Monitoring & Testing in RTE seafood plants. What to test, how to test, & how to take appropriate action. Goal of Listeria testing and monitoring testing program is to FIND Listeria.
E N D
Listeria Monitoring & Testing in RTE seafood plants What to test, how to test, & how to take appropriate action
Goal of Listeria testing and monitoring testing program is to FIND Listeria Listeria testing provides an opportunity to identify problems before they lead to finished product contamination, recalls, & regulatory actions
What to test? • Raw materials • Finished Products • Processing plant environment (all areas including raw, in-process, and finished product areas) • Food contact surfaces • Non-food contact surfaces
What to test for? • Listeria monocytogenes • The specific type (species) of Listeria that can cause human disease • Listeria species • Includes different species of Listeria, such as Listeria monocytogenes as well as Listeria innocua and others, which do not cause human disease
Why test for Listeria monocytogenes? • It is the specific type that causes human disease • Listeria monocytogenes specific testing is generally conducted when finished products are tested since only L. monocytogenes is considered an adulterant • Listeria testing may not always be a good indicator for presence of L. monocytogenes • Sometimes only 5-10% of Listeria species positive samples harbor L. monocytogenes
Why test for Listeria species • More common than Listeria monocytogenes, thus more appropriate for routine monitoring • Test results may be available more rapidly than for Listeria monocytogenes • Testing may be cheaper than Listeria monocytogenes testing • Listeria species testing generally used for environmental samples
Raw material testing • May be important for raw materials to be used for cold smoking, which is a process that does not kill Listeria • May be used to test raw materials from new suppliers • May be used to continuously monitor raw materials from suppliers
Finished product testing • Finished product testing is NOT an essential part of a L. monocytogenes control program • Sometimes conducted at request of customers • Finished product testing requires specific definition of lots: • L. monocytogenes positive lots in commerce have to be recalled • In a test and hold program (which is recommended), L. monocytogenes positive lots have to be reprocessed or destroyed
Environmental Listeria testing An essential part of each Listeria control program
Why environmental Listeria testing and monitoring? • Finished product contamination can most commonly be traced back to Listeria found in the processing environment • Finding of environmental samples positive for Listeria does not require product recall • Regulatory agencies are developing directives and guidance encouraging regular environmental Listeria testing
Goals of an environmental Listeria testing program • Identify problem areas harboring Listeria and locate contamination sources • Confirm effectiveness of problem-solving procedures
Critical considerations for environ-mental Listeria monitoring program • Design of environmental testing program • When to test (before start-up; mid-shift; end of shift?) • Where to test (product contact surfaces, cart wheels, drains?) • How often to test (weekly, monthly?) • Response to a positive sample
Environmental Listeria monitoring plan • Each environmental monitoring plan should be specific to the individual processing facility. • Listeria spp. testing is recommended for non-product and product contact surfaces
Where to test? • Food contact surfaces • Food contact surface positives may have to be followed up with finished product testing • Non-food contact surfaces • Sites in coolers (floors, walls, cooler coils, condensate collectors etc.) • Tubs, conveyances, underneath tables • Floors, floor mats, walls, & drains in production areas
Testing of non-food contact surfaces • Initial weekly sampling is recommended for most wet areas where Listeria can grow • Some sampling sites should be constant (i.e., same site should be sampled regularly), but others can vary • Additional samples may need to be taken in proximity of positive samples
Where to test – the zone concept • Plant is divided into different zones; zones are defined based on relative potential for finished product contamination a site or area represents; sampling and corrections triggered by positive samples differ by zones. • Zone 1: Finished product contact surfaces • Zone 2: Non-food contact surfaces in finished product area • Zone 3: Product contact surfaces in raw product handling areas • Zone 4: Areas remote from finished product handling (e.g., non-product contact surfaces in the raw product handling areas)
When to test? • Pre-op • Less likely to yield positive samples • More easy to interpret, will identify sanitation weaknesses • Mid-op • More likely to yield positive • Will provide information on spread of Listeria during processing
What to do with testing results • Review testing results every time results are reported • This should include review of last 4-8 sampling results to identify trends (e.g., site that has positives with intervening negatives • Take corrections on each positive sample and document action
What to do with testing results (cont’d) • Organize testing results in one location (folder, three-ring binder) • Include documentation of corrections in same location • Conduct regular (quarterly, yearly; depends on testing frequency & volume) review of testing results • Tabulate and evaluate long-term trends
Guidelines for corrective actions • Corrections based on positive samples need to be plant specific • Each positive sample should be followed up with additional investigations • Trend towards increased frequency of Listeria spp. needs to be investigated to determine reason and action needs to be taken to reduce frequency
Guidelines for corrective actions (cont’d) • Additional samples should be taken from environmental area that showed positive results • Additional positive samples after corrections need follow up with intensified cleaning and re-testing • Problems areas may have to be shut down temporarily • Consider if a test and hold program is needed
How is environmental testing performed? • Sponges are used to collect samples from selected environmental sites • Kits for sterile sample collection are available from testing laboratories • Hands-on training in proper sampling technique should be performed by professional • Environmental samples should represent constant areas (e.g., 2 x 2 ft) • Product contact surface samples should be collected from areas as large as possible
How is environmental testing performed? (cont’d) • After sample collection, sponge is deposited in sterile plastic bag and sealed • Sponges are sent to laboratory for testing
Example – Medium sized plant pro-ducing hot & cold smoked products • Plant only tests environmental samples (non-product contact surfaces and product contact surfaces) • All testing is for Listeria spp.
Testing plan • Samples from 10 non-food contact surfaces are tested weekly; samples taken before production starts • 6 sites in finished product area (1 floor sample near slicer; 1 sample from underneath tables used for product packaging, 2 employee contact surfaces, 1 floor drain, 1 sample from cart wheels • 4 sites in raw material handling area (1 raw material cooler floor, 1 brining cooler floor, 1 floor drain, 1 underneath table used for raw material prep)
Testing plan (cont’d) • Samples from 5 product contact surfaces are tested weekly; samples taken at least 3 h after production started • 1 sample from blade of slicing machine • 1 sample from scale used to weigh product before packaging • 1 sample from skinning machine conveyer belt • 1 sample from trimming knife • 1 sample from totes used to move cold-smoked products
Corrections – non-product contact surfaces • Raw material sites with positive results for 2 consecutive weeks will receive more stringent cleaning and sanitizer rotation until at least 3 of 4 consecutive tests are negative • Finished product area sites with a positive result will receive immediate attention and re-testing. • If re-test is positive line may be shut down (or go to test and hold procedure for finished products) and additional cleaning and sanitizing, including line disassembly will be implemented until three consecutive daily samples are negative.
Corrections – product contact surfaces • Sites with a positive result will receive immediate intensified cleaning and sanitizing, as well as daily sampling. If 2 consecutive samples are positive the area is shut down and extensive sanitation procedures are implemented. Swabs are taken before start-up and at two-hour intervals until 3 consecutive negative samples demonstrate that the contamination source has been eliminated; at that point routine testing can be resumed.
Summary • Listeria testing plan may include raw and finished product testing • Environmental Listeria testing is necessary to control this pathogen • Testing plant needs to be developed individually for each operation • Positive testing results need to be followed up with corrections, which need to be documented