1 / 16

How to Build RedBoot Image for IXDP425 ?

How to Build RedBoot Image for IXDP425 ?. 692430003 林谷泉. Outline. Obtaining the Software Using the Certified Binaries Building Binary Images from Source Installing RedBoot. Obtaining the Software. Using the Certified Binaries. The Quickest Way. Building Binary Images from Source.

Download Presentation

How to Build RedBoot Image for IXDP425 ?

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. How to Build RedBoot Image for IXDP425? 692430003 林谷泉

  2. Outline • Obtaining the Software • Using the Certified Binaries • Building Binary Images from Source • Installing RedBoot

  3. Obtaining the Software

  4. Using the Certified Binaries • The Quickest Way

  5. Building Binary Images from Source • Prepare the Host Platform • Install the Tool Chain • Set UP the Tool Chain • Obtain the RedBoot Source Code • Setting Up, Configuring , and Building RedBoot

  6. Prepare the Host Platform • Intel Pentium III 550-MHz Class host System • 256M of RAM • Red Hat 7.3 Linux ( Everything option installed ) • Red Hat 8.0 and 9.0 distribution are not supported at this time.

  7. Install the Tool Chain • Tool Chain can be obtained from ftp://ftp.ges.redhat.com/private/gnupro-xscale-030422 • Extract the install script • As root, install the tool chain

  8. Set UP the Tool Chain • Create the symbolic links for arm-elf to their xscale-elf equivalents using these commands. • To ensure that the correct tool chain is used, add it to your PATH.

  9. Obtain the RedBoot Source Code • Make a working directory for the build. • Obtain the certified Red Hat RedBoot source code (redboot-intel-xscale-031212.tar.Z) from the following site:ftp://ftp.ges.redhat.com/private/gnupro-xscale-030422 • Untar the RedBoot source

  10. Setting Up, Configuring , and Building RedBoot • Use these commands to set up the build

  11. Setting Up, Configuring , and Building RedBoot (cont.) • Add the NPE support eCos Package to the RedBoot build

  12. Setting Up, Configuring , and Building RedBoot (cont.)

  13. Setting Up, Configuring , and Building RedBoot (cont.) • Configure and build the RedBoot images.

  14. Setting Up, Configuring , and Building RedBoot (cont.) • When the build is complete, the target images are in the directory.

  15. Installing RedBoot • Stand-alone Flash Programmers • JTAG-based Flash Programmers • VisionICE

  16. Future Works • Purchase Flash ROM • Study More about eCos and IXDP425

More Related