260 likes | 939 Views
URA Components. Marshitah binti Ab Wahid (1090040) Mohd Azizul Mohd Atan (1090042) Abdullah Zahid Azhari (1090043). Components Of Removable Applaince. Active Components Retentive Components Anchorage Base Plate. ACTIVE COMPONENTS. Springs Screws Elastics . Z-spring.
E N D
URA Components MarshitahbintiAb Wahid (1090040) MohdAzizulMohdAtan (1090042) Abdullah ZahidAzhari (1090043)
Components Of Removable Applaince • Active Components • Retentive Components • Anchorage • Base Plate
ACTIVE COMPONENTS Springs Screws Elastics
Z-spring • Stainless steel wire • 0.5mm diameter • Function: -proclination of 1 or 2 incisors -to correct mild rotation if only 1 helix is activated
T-spring • For incisor, 0.5mm diameter stainless steel(SS) wire • For premolar, 0.6mm diameter SS wire • Function: -for proclination of incisors or premolar
Finger spring • For incisor, 0.5mm SS wire • For canine and premolar, 0.6mm SS wire • Function: -for mesial or distal movement
Labial bow • 0.7mm diameter SS wire • Function: -for retraction of anterior teeth
Split labial bow • 0.7mm diameter SS wire • Function: -retraction of anterior teeth -to close diastema
Robert retractor • 0.5mm diameter SS with sleeve • Function: -retraction of anterior teeth
Buccal canine retractor • 0.7mm diameter SS wire • Function: -palatal and distal movement of mesially angulated canine
Coffin spring • 1.25mm diameter SS wire • Function: -transverse expansion -buccalcrossbite correction
Screw • Function: -for expansion of arch -for distalization of molar teeth -May be used for moving one tooth or group of teeth (usually more than one tooth to be moved with a screw) -Have different sizes and range of activation -Useful only when a few millimeters of space is needed -Clasps for retention • Expansion is 1 mm. per one full turn i.e. 0.25 mm. per quarter turn
Elastics • Rubber or latex rings • Function: -extra-oral traction -inter-maxillary traction • However, it depends largely on the patient cooperation
Retentive components • Adam’s clasp • Southend clasp • Labial bow • Ball-ended clasp • Delta clasp
Adam’s clasp • The most useful clasp in removable appliances. • It is designed to engage the MB, DB undercuts of posterior teeth. • Advantage, it does not separate teeth and has excellent retention.
Components of Adam’s Clasp 1- Arrow heads 2- Bridge 3- Tags 4- Retentive parts It is made of 0.7 mm diameter hard St. St. round wire Fabrication of Adam’s Clasp
Southend clasp • 0.7mm diameter SS wire • Useful when distal movement of canine is required
Labial bow • 0.7mm diameter SS wire • Function: -retention - important when mesial/distal movement is planned
Ball-ended clasp • It like Adam, extends across the embrasure • Uses buccal undercuts for retention • Easy to fabricate • It is stiff that could not be extended deep into the undercuts • Provide minimal retention • Use 0.7mm diameter stainless steel wire
Delta clasps • 0.7mm diameter SS wire • Difficult to adjust • Function like adams clasps, but it utilizes a helix on the mesial and distal undercuts for retention
Anchorage Resistance to unwanted tooth movement BY equal in magnitude and opposite in direction
Baseplate • It must be: -hold components -clear acrylic = heat cure, cold cure, autoresin -comfortable -good fit -can be active-act as bite plane
References • http://www.retainerlab.com/Pages/Springs.htm • http://universal-dental-techniques.com • http://www.intelligentdental.com/2011/10/02/agapbetween-your-upper-front-teeth/ • http://dentallecnotes.blogspot.com/2011/10/note-on-active-components-of-removable.html • http://o-atlas.de/eng/kapitel5_156.php • http://askanorthodontist.com/braces/what-do-the-elastic-rubber-bands-on-braces-do/ • Lecture by Dr. Norzakiah(principles of removable appliance therapy-part 1) • Lecture by Dr. FitriOctavianti(types of orthodontic appliances)