How To Use Plumbing Tools?

1. How To Use Plumbing Tools? V-groove teeth are on the top and bottom, so let's fix that part by biting into the pipe. Select a pipe slightly larger than the outside diameter of the pipe. Turn the handle to open the upper and lower teeth to put the pipe in a vise. When the frame is closed, it will not open, and by turning the Nickel 200 Plate screw with the handle, it is possible to sandwich the pipe between the upper and lower teeth. Pipe cutter Fix the pipe with a vise, etc., open the knob and lightly touch the cut part of the pipe. Then turn the handle and cut Titanium Plate with a pipe cutter. Please cut while gradually deepening the notch. Pipe threading machine The chaser has the nominal dimensions of the screw and numbers 1 to 4, so check and install it. Once the chaser is installed on the main body, it can be cut by aligning the scale with the nominal dimensions of the screw you are trying to cut. Clamp it and operate it as a round top on hastelloy c276 tube. When you finish cutting, move the chaser back, and it will come off the pipe. The lead type does not allow the chaser to retract, so please reverse it and remove it. Water pump pliers When grasping the inconel 625 tube, adjust the screw's position according to the thickness of the pipe. When using it, grasp the end of the handle for more strength.

2. Chain pipe wrench Loosen the chain a little and wrap it around the pipe. Hook the pins protruding from both sides of the chain into the main body's groove and rotate the main body. The teeth will be caught on the Titanium Round Bar. This allows you to turn the pipe. Precautions for use Before using the Duplex Pipe vise, fix it with bolts so that it will not fall over. If there is a foreign matter in the upper and lower grooves, the pipe will not cut in, so remove it before use. If the upper and lower teeth are worn, send them for repair. The pipe cutter has a sharp edge, so do not touch it directly. Avoid forcibly turning, threading, or pushing sideways. It will damage the cutting edge and shorten the life of the blade. Stainless steel stub end for piping The product introduced this time is a stainless steel stub end lap joint for piping. A stub end lap joint is a pipe joint with a collar at the end and is used in combination with a loose flange. Generally, a loose flange and a stub end are used in combination. Since the steel pipe and flange are not directly welded when connected, the loose flange can be rotated freely. If the flange is directly attached to the Duplex Round Bar, the bolt holes on both flanges to be butted together must be adjusted before delivery to the site. However, the use of stub ends and flanges eliminates the need for pre-adjustment and simplifies field joining. Compared to directly mounting the steel pipe and the Duplex Plate, using the stub end will cost more as part cost. The bolt holes are not centered during the construction, the construction can be done on-site easily, and the cost can be reduced. Business :- METAL TUBE INDUSTRIES Address:- India Phone :- 91-22-23865094 Email :- sales@metaltubeind.com Visit Us :- https://www.metaltubeind.com