1 / 35

Pneufit push-in fittings

Pneufit push-in fittings. For general purpose pneumatic applications. Pneufit Push-in fittings. General purpose pneumatic fittings providing neat installation and fast tube assembly For use with flexible plastic tubing Easy tube release and remake of the joint

mikkel
Download Presentation

Pneufit push-in fittings

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Pneufit push-in fittings For general purpose pneumatic applications

  2. Pneufit Push-in fittings • General purpose pneumatic fittings providing neat installation and fast tube assembly • For use with flexible plastic tubing • Easy tube release and remake of the joint • Vacuum to 18 bar operating pressure • Roll marked collet for easy tube size identification • Comprehensive range of fitting forms 6 mm 6 mm 6 mm 6 mm

  3. Pneufit component parts • Collet • Collet teeth • ‘O’ Ring • Body • Pre-applied thread sealant • Temperature range -200C to 700C • Corrosion resistant nickel plated body and collet • Materials of construction • Brass body and collet • Medium Nitrile ‘O’ Ring • Non PTFE based thread sealant

  4. Range of tube sizes Metric • Tube sizes 4 mm o/d 5 mm o/d6 mm o/d 8 mm o/d 10 mm o/d 12 mm o/d 14 mm o/d • Tubing types: Polyamide (PA) Polyurethane (PU)

  5. Range of tube sizes Inch • Tube sizes 3/16 inch o/d 1/4 inch o/d5/16 inch o/d 3/8 inch o/d 1/2 inch o/d • Tubing types: Polyamide (PA) Polyurethane (PU)

  6. Range of thread sizes • Parallel thread sizesM5 G 1/8G 1/4G 3/8G 1/2 • Taper thread sizesR 1/8R 1/4R 3/8R 1/2 mm mm m mm mm mm mm mm mm

  7. Internal Hexagon

  8. Internal hexagon • The through bore of the straight adaptors are standard hexagon sizes • Where valve or manifold ports are close pitched, conventional ring or socket spanners are unsuitable • Power driven or hand operated hexagon keys solve the problem

  9. Tube and Fitting assembly

  10. 900 Tube preparation • Use a standard tube cutter to give a square end • Ensure that the tube end is clean and free from surface damage

  11. Connecting the tube

  12. Connecting the tube (Pneufit) • Push the tube through the collet into the fitting • Continue pushing firmly through the collet teeth and ‘O’Ring up to the tube stop • Pull back on the tube to reinforce the collet tooth gripping action. Pressure can then be applied

  13. Connecting the tube (Pneufit) • Push the tube through the collet into the fitting • Continue pushing firmly through the collet teeth and ‘O’Ring up to the tube stop • Pull back on the tube to reinforce the collet tooth gripping action. Pressure can then be applied

  14. Connecting the tube (Pneufit) • Push the tube through the collet into the fitting • Continue pushing firmly through the collet teeth and ‘O’Ring up to the tube stop • Pull back on the tube to reinforce the collet tooth gripping action. Pressure can then be applied

  15. Connecting the tube (Pneufit) • Push the tube through the collet into the fitting • Continue pushing firmly through the collet teeth and ‘O’Ring up to the tube stop • Pull back on the tube to reinforce the collet tooth gripping action. Pressure can then be applied

  16. Connecting the tube (Pneufit) • Push the tube through the collet into the fitting • Continue pushing firmly through the collet teeth and ‘O’Ring up to the tube stop • Pull back on the tube to reinforce the collet tooth gripping action. Pressure can then be applied

  17. Disconnecting the tube

  18. Disconnecting the tube (Pneufit) • Turn off and exhaust the air pressure • Push the tube and collet into the fitting • Hold down the collet and pull out the tube

  19. Disconnecting the tube (Pneufit) • Turn off and exhaust the air pressure • Push the tube and collet into the fitting • Hold down the collet and pull out the tube

  20. Disconnecting the tube (Pneufit) • Turn off and exhaust the air pressure • Push the tube and collet into the fitting • Hold down the collet and pull out the tube

  21. Disconnecting the tube (Pneufit) • Turn off and exhaust the air pressure • Push the tube and collet into the fitting • Hold down the collet and pull out the tube

  22. Disconnecting the tube (Pneufit) • Turn off and exhaust the air pressure • Push the tube and collet into the fitting • Hold down the collet and pull out the tube

  23. Pneufit range of fittings forms Series 10 ( Metric tube )

  24. Pneufit parallel adaptors (metric) • Straight adaptors • Internal adaptors • Straight stem adaptors • Swivel elbow adaptors • 45O Swivel elbow adaptors • Parallel Y adaptors • Swivel side tee adaptors • Swivel tee adaptors

  25. Pneufit taper adaptors (metric) • Straight adaptors • Straight stem adaptors • Fixed elbow adaptors • Swivel elbow adaptors • Extended swivel elbows • Fixed side tee adaptors • Fixed tee adaptors • Swivel tee adaptors • Swivel side tee adaptors • Parallel Y adaptors

  26. Pneufit tube connectors (metric) • Straight connectors • Elbow connectors • Tee connectors • Parallel Y connectors • 4 Way cross connectors

  27. Pneufit stem connectors (metric) • Straight stem connectors metal • Straight stem connectors plastic • Stem tailpiece adaptors • Reducing connectors • Stem elbow connectors • Silencers • Pressure indicator ( plug in ) • Plugs

  28. Pneufit bulkhead connectors(metric) • Bulkhead connectors • Pressure indicators • Swivel bulkhead elbow connectors • Mixed bulkhead connectors PIF to compression

  29. Pneufit banjo connectors(metric) • Elbow banjo assemblies • Tee banjo assemblies • Banjo bolts • Elbow banjo bodies • Tee banjo bodies • Regulating elbow banjo assemblies • Regulating banjo bolts

  30. Pneufit banjo connectors(metric) • Banjo bolt with top port • Banjo bolt with indicator • Banjo bolt single stacking • Banjo bolt double stacking • Banjo bolt triple stacking • Stacking banjo bolts can be used with any combination of elbow or tee banjo bodies

  31. Pneufit banjo flow regulators • Thread sizes taperR 1/8 R 1/4 R 3/8 R 1/2 • Tube sizes 4 mm o/d6 mm o/d8 mm o/d10 mm o/d12 mm o/d

  32. Pneufit push-in manifolds • Tube inlet type, 8 or 10 mm o/d inlet each end • Threaded inlet type, with 8 or 10 mm o/d tube inlet on one end • Thread sizes taperR 1/8 R 1/4 R 3/8 R 1/2 • Six outlets each4, 6 or 8 mm o/d

  33. Pneufit range of fittings forms Series 12 ( Inch tube )

  34. Pneufit range (inch tube) • Straight adaptors M5 • Straight adaptors taper • Swivel elbow adaptors • Elbow connectors • Swivel tee adaptors • Swivel side tee adaptors • Tee connectors • Straight connectors • bulkhead connectors

  35. End

More Related