1 / 22

Product Specification of Power Supply Unit

R&D Center, SMP Global Co., Ltd. Product Specification of Power Supply Unit. Specification. Revision Ver. 02A 06/SEPTEMBER/2005 Page 1/22. R&D Center, SMP Global Co., Ltd. Product Specification of Power Supply Unit. 2. CONTENTS. R&D Center, SMP Global Co., Ltd.

mikko
Download Presentation

Product Specification of Power Supply Unit

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. R&D Center, SMP Global Co., Ltd Product Specification of Power Supply Unit Specification Revision Ver. 02A 06/SEPTEMBER/2005 Page 1/22

  2. R&D Center, SMP Global Co., Ltd Product Specification of Power Supply Unit 2. CONTENTS

  3. R&D Center, SMP Global Co., Ltd Product Specification of Power Supply Unit 3. RECORD of REVISION

  4. R&D Center, SMP Global Co., Ltd SMPS Specification Product Specification of Power Supply Unit 4. Input Specification 4. 1 Input Condition 4. 2 Others 5. Safety & EMS Specification

  5. R&D Center, SMP Global Co., Ltd SMPS Specification Product Specification of Power Supply Unit

  6. R&D Center, SMP Global Co., Ltd SMPS Specification Product Specification of Power Supply Unit 6. Output Specification 6. 1 Output Voltage & Load Condition *1. Ripple & Noise measurement method Electrolytic Capacitor 47㎌ + 0.1㎌ Power Supply Unit Load “Measurement point” 700mm

  7. R&D Center, SMP Global Co., Ltd SMPS Specification Product Specification of Power Supply Unit 6. 2 Output Protection *1. 5Vstand_by Voltage must return automatically after a problem is eliminated *2. The O.C.P point is measured when other output load is a maximum The O.C.P point is load current when the output voltage decrease to o (shut down) No hardware failure and No fire

  8. R&D Center, SMP Global Co., Ltd SMPS Specification Product Specification of Power Supply Unit 7. Environment condition 7. 1 Ambient temperature and humidity 8. Micro Controller control signal 8. 1 Input signal (From signal interface to power module) 8.1.1 Power ON Signal High : Output Voltages are ON Low : Output Voltages are OFF

  9. R&D Center, SMP Global Co., Ltd Reliability Test Data Product Specification of Power Supply Unit 9 Reliability Test Data 9.1 MTBF (Mean Time Between Failure) : 20000 Hours The power supply shall be designed and produced to have a mean time between failures (MTBF) Of 20000 operating hours at 90% confidence – level while operating under the following condition AC input Voltage : 200 Vac ~ 230 Vac Duty Cycle : 6 Hours ON, 2 Hours OFF Ambient Temp : 25 ± 2℃ Humidity : Prevailing Condition 9.2 Temperature Reliability Test 9.2.1 High Temperature Operating • Condition : Temperature : 60 ℃ Load : Typical AC Input : 220Vac • Operating Time : 72 Hours 9.2.2 Test Of Power ON / OFF • Condition : Temperature : 25 ℃ Number : 10000 Times, Load : MAX AC Input : 220Vac 9.2.3 Low Temperature Operating • Condition : Temperature : 0 ℃ Load : Typical AC Input : 220Vac • Operating Time : 72 Hours

  10. R&D Center, SMP Global Co., Ltd Pin Assignment Product Specification of Power Supply Unit 10. Pin Assignment & Wafer Specification

  11. R&D Center, SMP Global Co., Ltd BOARD (Dimension) Product Specification of Power Supply Unit 11. PSU Assembly dimension : 251(W) * 158 (L) mm 12. LCD SMPS WEIGHT 12. 1 SMPS WEIGHT : 860g MAX

  12. R&D Center, SMP Global Co., Ltd Part List Product Specification of Power Supply Unit 13. PART LIST

  13. R&D Center, SMP Global Co., Ltd Part List Product Specification of Power Supply Unit

  14. R&D Center, SMP Global Co., Ltd Part List Product Specification of Power Supply Unit

  15. R&D Center, SMP Global Co., Ltd Part List Product Specification of Power Supply Unit

  16. R&D Center, SMP Global Co., Ltd Schematic drawing Product Specification of Power Supply Unit 14. Schematic drawing

  17. R&D Center, SMP Global Co., Ltd Parts disposition Product Specification of Power Supply Unit 15. Parts disposition drawing

  18. R&D Center, SMP Global Co., Ltd Top pattern drawing Product Specification of Power Supply Unit 16. Top pattern drawing

  19. R&D Center, SMP Global Co., Ltd Bottom pattern Product Specification of Power Supply Unit 17. Bottom pattern drawing

  20. R&D Center, SMP Global Co., Ltd Bar Code Label Product Specification of Power Supply Unit 18. Bar Code Label 10mm 50mm • L • SV42 • S • 01 • A • 05 • 20 • 0001 : LCD Power : Model : Buyer : PCB Layout revision number : BOM revision number : year of manufacture : weeks of manufacture : Serial number of power supply unit

  21. R&D Center, SMP Global Co., Ltd Packing description Product Specification of Power Supply Unit Savvy 42S 19. Packing description • Inner box • Weight : • 1 Savvy power board : 900g MAX • 1 Out Box : 9.5Kg MAX • Packing description : • One Savvy board in an inner box • 10 inner box in carton • Air Cap (30×40×3) • Silicagel • Carton (290 (L)*440 (W)*310 (H) mm) 310mm 290mm 440mm

  22. R&D Center, SMP Global Co., Ltd Safety Certificate Product Specification of Power Supply Unit 20. Safety Certificate 20.1 CB Certificate Ref. No. DE 3 - 81327

More Related