70 likes | 70 Views
A cream separator is defined as a device that separates the whole milk into skimmed milk or cream. Buy Cream Separator Machine online from MilkyDay. We provide a cream separator useru2019s manual. Read this manual carefully before using your Cream Separator. For more information, visit www.milkyday.com
E N D
Electric Cream Separator Motor Sich This cream separator is made mainly from polycarbonate, drum and disks are made or aluminium. Very good combination of quality and price. With this cream separator you can make cream, sour cream and low fat milk at home. We are sure there are more products you can make but we mentioned the most popular.
VERY EASY TO USE! Just warm the milk up to 40˚C or 104˚F, switch the separator on and pour the milk into 12 liters milk container. HOW MUCH CREAM YOU CAN GET?: - from 10 liters of milk you will get about 1 liter of cream;- the cream will have 10 times more fat than milk that your separate. It means that if milk that you separate has 3,2% of fat you will get cream with 32% of fat;- if you need a cream with less content of fat you can mix it with low fat milk which you get after separation.- it is recommended to wash the plates inside the drum after every 20-25 liters (two bowls) of milk.
The General Instructions During Purchasing Of Milk Cream Separator Check the complete set of supply of milk cream separator (further – separator) in concordance with CHAPTER 2 of the given manual. Demand during purchasing the check of separator idle run. 1. PURPOSE AND TECHNICAL FEATURES Centrifugal milk separator “Motor Sich 100” with electric drive efficiency not less, than 80 l/hours is intended for separation of the whole milk on cream and skim milk with simultaneous cleansing. During separator production the remanufacturing operations are performed. Therefore, the construction of particular parts can differ from registration certificate.
2. SAFETY PRECAUTIONS • 2.1 It is necessary to keep safety precautions in order to prevent fire possibility, electric injury and accidents during separator exploitation. 2.2 During its setting-up procedures it is necessary to carry out the next steps: • check of completeness and security of details attachment; • external examination (power cable and plug operability), case insulating details integrity; • check of switch positive action; • check of separator idle run. • - damage of plug junction, power cable or its protective tube; - inefficient switch operation; - occurrence of smoke or smell, that are typical for the burn insulation; - noise appearance; - damage or crack occurrence in housing parts; - unwanted sounds or raised vibration appearance
Phone in EU: +420 228 882 852 Phone in the US: +1 802 448 5657 Website: www.milkyday.com