1 / 18

Hard Hat Safety

Hard Hat Safety. A HISTORY OF HARDHATS. A HISTORY OF HARDHATS. Manufactured by what is known as the Bullard Company today. Called the Hard-Boiled Hat and patented in 1919. Manufactured out of steamed canvas, glue and black paint. 1938 - first aluminum hardhat became available.

mills
Download Presentation

Hard Hat Safety

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Hard Hat Safety

  2. A HISTORY OF HARDHATS

  3. A HISTORY OF HARDHATS • Manufactured by what is known as the Bullard Company today. • Called the Hard-Boiled Hat and patented in 1919. • Manufactured out of steamed canvas, glue and black paint. • 1938 - first aluminum hardhat became available.

  4. A HISTORY OF HARDHATS • 1940’s - use of heat resistant fiberglass. • 1950’s and 60’s - use of plastics replaced fiberglass. • 1980’s change in suspension.

  5. FIRST KNOWN HARD HAT AREA IN THE UNITED STATES

  6. HARD HATS • Must meet ANSI Standards • Require a hard outer shell and a shock-absorbing liner. • Have a liner that incorporates a head band and straps that suspend the shell from 1 to 1 1/4 inches away from the users head.

  7. HARD HATS MUST: • Resist penetration by objects. • Absorb the shock of a blow. • Be water resistant and slow burning.

  8. CLASSES OF HARDHATS

  9. CLASS A • General service only. • Provides good impact protection. • Has limited voltage protection. • Used in mining, building construction, shipbuilding, and manufacturing.

  10. CLASS B • Provide good impact protection. • Protect against high-voltage shock and burns.

  11. CLASS C • Offer limited protection. • Do not protect against falling objects or electric shock.

  12. SUSPENSION REPLACEMENT • Shows signs of deterioration such as cracking, tearing, or fraying. • No longer holds the shell from 1 inch to 1 1/4 inches away from the head.

  13. REPLACEMENT OF THE HARD HAT SHELL • The brim or shell is nicked, cracked, perforated, or deformed. • Loss of surface gloss. • Chalking or fading of surface. • Flaking of surface. • Shell is stiff or brittle. • Struck by a falling object. • Has made an electrical contact.

  14. DEGRADATION TEST OF THE HARD HAT SHELL • Compress the shell inward from both sides about one inch. • Release without dropping the shell. • Should return to its original shape quickly. • If elasticity is not similar to a new shell, it should be replaced.

  15. IMPORTANT POINTS TO REMEMBER • Protects from impacts from above. • Never modify the shell or suspension. • Avoid contact with electrical devices. • Replace if struck by a falling object. • Do not store in direct sunlight. • Do not sit on. • Do not paint. • Do not use solvents or cleaners.

  16. CARE AND MAINTENANCE • Remove head liner and inspect for defects. Replace if needed. • Immerse shell in hot water and detergent for one minute. • Scrub. • Rinse in clear hot water. • Inspect for defects, replace if needed.

  17. CARE AND MAINTENANCE • INSPECT DAILY BEFORE USING

  18. The Brain Is Your Best PPE. Use It.

More Related