1 / 23

Proposal Comparison Summary

This document provides a summary of the two PHY proposals for the IEEE P802.15 Working Group for Wireless Personal Area Networks (WPANs), comparing them based on the requirements described in the TG3a Selection criteria document.

mitchem
Download Presentation

Proposal Comparison Summary

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Project: IEEE P802.15 Working Group for Wireless Personal Area Networks (WPANs) Submission Title: [Proposal Comparison Summary] Date Submitted: [May 12, 2004 Source: [Matt Welborn] Company [Freescale Semiconductor] Address [8133 Leesburg Pike Vienna, VA USA] Voice:[703-269-3000], E-Mail:[mwelborn@xtremespectrum.com] Re: Abstract: [Summarize the two PHY proposals with respect to the requirements described in the TG3a Selection criteria document.] Purpose: [Provide technical information to the TG3a voters regarding PHY proposals.] Notice: This document has been prepared to assist the IEEE P802.15. It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein. Release: The contributor acknowledges and accepts that this contribution becomes the property of IEEE and may be made publicly available by P802.15. Welborn, Freescale

  2. Introduction • Goal: Summarize the two proposals with respect to the requirements described in the TG3a Selection criteria document • Approach: Collect reported results from the various proposal documents and requirements from selection criteria. • Disclaimer: The author of this document is also one of the authors of the DS-UWB (Merger #2) proposal. Opinions/comments are so labeled Welborn, Freescale

  3. Source Documents • Merger #1: • 03/268r3 • 04/220 • Merger #2: • 04/137r2 • 04/099r2 • 04/140r4 • Selection Criteria: • 03/031r11 Welborn, Freescale

  4. 3.1 Unit Manufacturing Cost Welborn, Freescale

  5. 3.2.2 Interference & Susceptibility Welborn, Freescale

  6. 3.2.2.6-7 Generic In-band Interference Welborn, Freescale

  7. 3.2.3 Coexistence Welborn, Freescale

  8. 3.3.1 Manufacturability Welborn, Freescale

  9. 3.2.2 Time to Market Welborn, Freescale

  10. 3.3.3 Regulatory Impact Welborn, Freescale

  11. 3.4 Scalability Welborn, Freescale

  12. 3.5 Location Awareness Welborn, Freescale

  13. 4.1 Alternate PHY Required MAC Enhancements and Modifications Welborn, Freescale

  14. 5.1 Size and Form Factor Welborn, Freescale

  15. 5.2 PHY-SAP Payload bit-rate and Data Throughput Welborn, Freescale

  16. 5.3 Simultaneously Operating Piconets Welborn, Freescale

  17. 5.4 Signal Acquisition Welborn, Freescale

  18. 5.5 System Performance Welborn, Freescale

  19. 5.6 Link Budget Welborn, Freescale

  20. 5.7 Sensitivity Welborn, Freescale

  21. 5.8 Power Management Modes Welborn, Freescale

  22. 5.9 PHY Power Consumption Welborn, Freescale

  23. 5.10 Antenna Practicality Welborn, Freescale

More Related