1 / 12

Eco-Houses Based on Eco-Friendly Polymer Composite Construction Materials ECO-PCCM

ISO 9001:2000. Eco-Houses Based on Eco-Friendly Polymer Composite Construction Materials ECO-PCCM. PRODUCTION AND CHARACTERIZATION OF KENAF FIBERS / PP COMPOSITES. AVAILABILITY OF KENAF SAMPLES. KENAF FIBERS PREFORMS. PRODUCTION OF COMPOSITES. Molding Line. Press piston.

molly
Download Presentation

Eco-Houses Based on Eco-Friendly Polymer Composite Construction Materials ECO-PCCM

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ISO 9001:2000 Eco-Houses Based on Eco-Friendly Polymer Composite Construction Materials ECO-PCCM PRODUCTION AND CHARACTERIZATION OF KENAF FIBERS / PP COMPOSITES ECO-PCCM Second Meeting, Belgrade, 7-8 April 2005.

  2. AVAILABILITY OF KENAF SAMPLES ECO-PCCM Second Meeting, Belgrade, 7-8 April 2005.

  3. KENAF FIBERS PREFORMS ECO-PCCM Second Meeting, Belgrade, 7-8 April 2005.

  4. PRODUCTION OF COMPOSITES Molding Line ECO-PCCM Second Meeting, Belgrade, 7-8 April 2005.

  5. Press piston Hot plate Polster Release foil Kenaf layers Thermocouple Press platen PRODUCTION OF COMPOSITES ECO-PCCM Second Meeting, Belgrade, 7-8 April 2005.

  6. Glass/epoxy skin PRODUCTION OF COMPOSITES Press Cycle:Temperature: 170oCPressure: 240 barTime: 15 min 2nd Set 1st Set Purpose:- Increase stifness- Increase flex.strngth.- Decrease water absrp. Pure kenaf/PP composites ECO-PCCM Second Meeting, Belgrade, 7-8 April 2005.

  7. PRODUCTION OF COMPOSITES • All the samples (150 x 300 mm) are prepared of 7 layers of Isolkenaf (80% kenaf, 20% bicomp) under the following conditions: • Press Cycle: Temperature: 170oC Pressure: 240 bar Time: 15 min • The final composites were ~ 5 mm thick and weighted ~5.4 kg/m2. • The size of the composite plates is chosen for best utilization of the material since the test specimen have to be 120 mm long. ECO-PCCM Second Meeting, Belgrade, 7-8 April 2005.

  8. TESTING OF COMPOSITES Universal mechanical properties testing machineand Charpy impact tester ECO-PCCM Second Meeting, Belgrade, 7-8 April 2005.

  9. STRESS-STRAIN CHART OF THE FLEXURAL TEST ECO-PCCM Second Meeting, Belgrade, 7-8 April 2005.

  10. TESTING OF COMPOSITES ECO-PCCM Second Meeting, Belgrade, 7-8 April 2005.

  11. TESTING OF COMPOSITES ECO-PCCM Second Meeting, Belgrade, 7-8 April 2005.

  12. THANK YOU FOR YOUR ATTENTION ECO-PCCM Second Meeting, Belgrade, 7-8 April 2005.

More Related