290 likes | 343 Views
The engine needs a spark to ignite, which in turn starts the car. The spark plug plays an important role by providing the required spark to the engine. But in due course of time, the spark plugs get clogged and malfunction. Ultimately, you have to replace your spark plugs. Many people rely on a professional to do this simple job. However, replacing a spark plug is the easiest thing which can be done by anyone. Go through the slide to know the ways by which you can replace the spark plug on your own.
E N D
Car Spark Plug Replacement by yourself
Car spark plug replacement is one of those auto repair jobs which can be easily done by yourself.
The new cars come with aluminum cylinder heads, coil on plug ignition systems, making it little difficult to reach the spark plugs. The new cars come with aluminum cylinder heads, coil on plug ignition systems, making it little difficult to reach the spark plugs.
But still the replacement can be done by self with the proper information and tools.
Follow the below information to ensure a safe replacement for your spark plugs:
Be sure to have the car's owner manual and read about the type of spark plug and its position in the car.
Buy the number of spark plugs required to be replaced from an authorized shop so that it is genuine and fits the model.
Also have the number of a good technician for help, in case you get stuck while doing the replacement.
Along with the spark plug socket and a screwdriver, try to proceed in the following manner to replace the spark plugs.
Never apply your hands on a hot engine as it is bad for both your hands and the component of the car.
If the engine is hot, then it is hard to unplug the spark plugs from the aluminum cylinder heads without damaging the threads.
Allow the engine to cool down for safe removal of the spark plugs without causing any damage.
Take the help of a compressed air duster to blow away the dust and dirt particles around the spark plugs.
While opening the plugs and cleaning the areas, take proper precautions to not allow any foreign particles inside the cylinder.
If any dirt particle gets inside, then it directly falls into the engine and may result in premature engine wear.
Avoid screwing the spark plugs in an inclined manner as it will result in a ruined thread.
To avoid inserting a tilted plug, first rotate them a bit by hand in the hole and if you feel it is getting tight too early, then stop and take it out.
This gives you an idea of the process of screwing and you can fit the plug in a straight manner in the second attempt.
Do not mix the wires and your work by trying to screw more than one spark plug at a time to complete it faster.
Always play safe and give full attention to a single spark plug for getting it screwed straight and correct. Always play safe and give full attention to a single spark plug for getting it screwed straight and correct.
If you hurry, then things will get messed up and you have to start over all again.
https://monacomotors.com/ https://www.facebook.com/Monaco-Motors-183189221124/ https://www.instagram.com/monaco_motors/ https://www.youtube.com/user/ MonacoMotors Thank You!