380 likes | 543 Views
William Stallings Data and Computer Communications 7 th Edition. Chapter 4 Transmission Media. Overview. Characteristics and quality determined by: Medium Signal Medium Guided - wire Unguided - wireless For Guided Medium The medium is more important For Unguided
E N D
William StallingsData and Computer Communications7th Edition Chapter 4 Transmission Media
Overview • Characteristics and quality determined by: • Medium • Signal • Medium • Guided - wire • Unguided - wireless • For Guided Medium • The medium is more important • For Unguided • The bandwidth produced by the antenna is more important • Key concerns are data rate and distance
Design Factors • Bandwidth • Higher bandwidth gives higher data rate • Transmission impairments • Attenuation • Interference • Issue especially in case of unguided medium • Number of receivers • Unicast (one sender, one receiver) • Multicast (multiple receivers can introduce more errors)
Guided Transmission Media • Twisted Pair • Coaxial Cable • Optical Fiber
Frequency Range Typical Attenuation Typical Delay Repeater Spacing Twisted pair (with loading) 0 to 3.5 kHz 0.2 dB/km @ 1 kHz 50 µs/km 2 km Twisted pairs (multi-pair cables) 0 to 1 MHz 0.7 dB/km @ 1 kHz 50 µs/km 2 km Coaxial cable 0 to 500 MHz 7 dB/km @ 10 MHz 4 µs/km 1 to 9 km Optical fiber 186 to 370 THz 0.2 to 0.5 dB/km 5 µs/km 40 km Transmission Characteristics of Guided Media
Twisted Pair Architecture Two Insulated copper wires Issues: (1) Interference due to unwanted electrical coupling of two copper (2) Interference due to unwanted electrical coupling between the neighboring twisted pairs
Twisted Pair Applications • Most commonly used medium • Telephone network • Between house and local exchange (subscriber loop) • Within buildings • To private branch exchange (PBX) • For local area networks (LAN) • 10Mbps or 100Mbps
Twisted Pair - Pros and Cons • Advantages • Less expensive • Easy to work with • Disadvantages • Low data rate • Short range
Twisted Pair (TP) Characteristics • Analog transmission • Amplifiers every 5km to 6km • Digital transmission • Use either analog or digital signals • repeater every 2km or 3km • TP is Limited • Distance • Bandwidth • Data rate • Susceptible to interference and noise • Easy coupling of electromagnetic fields
Unshielded and Shielded TP • Unshielded Twisted Pair (UTP) • Ordinary telephone wire • Less expensive • Weak immunity against noise and interference • Suffers from external EM interference • Shielded Twisted Pair (STP) • An extra metallic sheath on each pair • Relatively more expensive • Provide better performance than UTP • Increased Data rate • Increased Bandwidth
UTP Categories • Cat 3 • up to 16MHz • Voice grade found in most offices • Twist length of 7.5 cm to 10 cm • Cat 4 • up to 20 MHz • Cat 5 • up to 100MHz • Commonly pre-installed in new office buildings • Twist length 0.6 cm to 0.85 cm • Cat 5E (Enhanced) –see tables • Cat 6 • Cat 7
Coaxial Cable Applications • Television (TV) signals distribution • Ariel to TV • Cable TV • Long distance telephone transmission • Can carry 10,000 voice calls simultaneously • Being replaced by fiber optic • Short distance computer systems links • Local area networks (LAN) • Metropolitan area network (MAN)
Coaxial Cable Characteristics • Analog • Amplifiers every few km • Closer if higher frequency • Up to 500MHz • Digital • Repeater every 1km • Closer for higher data rates • Problem • Inter-modulation noise • Thermal noise
Optical Fiber Benefits • Greater capacity • Data rates of hundreds of Gbps • Smaller size & weight • Made up of extremely thin fibers • Lower attenuation • Electromagnetic isolation • Greater repeater spacing • 10s of km at least
Optical Fiber - Transmission Characteristics • Operational range • 1014 to 1015 Hz • Light source • Light Emitting Diode (LED) • Cheaper • Wider operating temperature range • Last longer • Injection Laser Diode (ILD) • Operates on laser principle • More efficient • Greater data rate • Wavelength Division Multiplexing (WDM)
Wireless Transmission Frequencies • 2GHz to 40GHz(Microwave Frequency) • Highly directional • Point to point devices • Microwave communications • 30MHz to 1GHz (Radio Frequency) • Omnidirectional • Broadcast radio • 3 x 1011 to 2 x 1014 (Local Frequency) • For Local applications
Antennas • By definition • Is a electrical device • Transmission • Radio frequency energy from transmitter • Converted to electromagnetic energy • By antenna • Radiated into surrounding environment • Reception • Electromagnetic energy impinging on antenna • Converted to radio frequency electrical energy • Fed to receiver • Same antenna often used for both
Radiation Pattern • Antenna might radiate power in all direction • Not same performance in all directions • How can we determine the performance of an antenna? • Solution is “Radiation Pattern” • Graphical representation of the radiated power • Isotropic antenna is an ideal antenna • Radiates in all directions equally • Use as a reference to characterize the power
Antenna Gain • Measure of directionality of antenna • Power output in particular direction compared with that produced by isotropic antenna • Measured in decibels (dB) • Gain could be +ve or -ve
Terrestrial Microwave (TMW) • Parabolic antenna • Small beam • Line of sight • Use especially for P2P applications • Usually use for long distance communications
Satellite Microwave (SM) • Satellite is relay station • Satellite • receives on one frequency • amplifies or repeats signal • transmits on another frequency • Requires geo-stationary orbit • Height of 35,784km • Applications • Television • Long distance telephone • Private business networks
Satellite Point to Point Link ground based microwave receiver ground based microwave transmitter
Satellite Broadcast Link Is it really broadcast??
Broadcast Radio • Omnidirectional (travel in all directions) • Line of sight is over • Doesn’t need parabolic antenna • Example FM radio
Wireless Propagation • Signal travels along three routes • Ground wave • Follows contour of earth • Up to 2MHz • AM radio • Sky wave • Signal reflected from ionize layer of upper atmosphere • BBC world service, Voice of America • Line of sight • Above 30Mhz • Antennas must be physically aligned • Atmosphere can reflect the microwave signal
Transmission Impairments in Wireless Transmission • Free Space Loss • Signal dispersion is a function of distance • Ratio between power-radiated to power-received • Greater for lower wavelength • Antenna gain can be used to compensate the losses • Also known as near far problem • Refraction • Each wireless medium has its own density • Propagation speed is a function of density of the medium • When medium changes, the result is refraction • Refraction means change of direction
Required Reading • Review Examples 4.1 to 4.4 • HW#2: Problems 4.1 and 4.2 • Due Date: Tuesday, September 25 (in class timing) • Need hard copy (typed or in hand writing) • OpNet Lab 2 and 3 • (Due Date: Thursday, September 27 before 2:30 Pm) • 3 Students (maximum) per group • One submission per group