MS mask

1. Mask silicone Mask Silicone is a soft elastomer made of two-component heated vulcanized liquid silicone rubber as a raw material, which is a single-vulcanized silicone. Traits Appearance before vulcanization: colorless or skin-colored oily liquid, the temperature range is -65 ° C -200 ° C, after vulcanization becomes a soft elastic material. Characteristics Environmentally friendly, non-toxic, electrical and chemical stability, water, ozone, weathering, non-corrosive, physiologically inert, non-toxic and tasteless, low line shrinkage, easy to operate, no deformation. The inner dimensions of the silicone mask are made around the face of the public, making the entire silicone mask closer to the human face, more realistic, breathable in the nostrils, and can be washed and rinsed with water. 4 application categories 1. As a mask hand model. The hand model here can be made according to the engraved model or the real face type. What is a hand model? Many people may not understand it. The hand model is white, it is the first (or the first batch of a few) model, and sometimes the hand is also called the headboard. 2, as a mold mold silica gel. As the mold is the easiest to understand, when we decide to mass-produce the mask, we need to use the mold to mold, and then we can use the silicone mold. There are some differences between the mask molds and the ordinary molds, because many times the real human face is used as the master mold to make the mold, so the quality of the mask silicone is very high. The mold silicone that replicates the

2. face should at least not damage the skin and pose no threat to human health. 3, the pattern is pad printed with silicone. The silica gel used here has a special name called pad printing silica gel. Pad printing is the printing of the pattern on the steel mold onto the surface of the product through a silicone rubber head. Of course, in order to ensure the vividness of the mask, it is impossible to directly print the trademark of the product on the surface of the mask. 4, as a mask trademark trademark glue. Silicone, which is a trademark of the mask, is also called a brand name silica gel. Because it is easy to emboss, it is often used as a trademark label for clothes. Like the pad printing silicone above, the logo cannot be applied to the mask surface. application Silicone masks can be used to make monster masks, monster masks, film and costume props masks, pig eight masks, Sun Wukong masks, silicone masks, Halloween masks, funny masks, and dance masks. It can also be applied to fire masks and labor masks to prevent dust and anti-virus. Safety Precautions Mask silica gel is a platinum catalyst. Water, impurities, organotin catalysts, acids, alkalis and other organic substances containing sulfur, phosphorus and nitrogen can affect the curing of the glue. They should not be mixed or contacted during use.