Performing Voice Commands: SITREP, 9 Line MEDEVAC and Visual Signal Techniques

1. Performing Voice Commands: SITREP, 9 Line MEDEVAC and Visual Signal Techniques

2. Tasks • Familiarize the Commander’s SITREP and 9 line medevac casualty evacuation request formats • Perform Visual Signal Techniques

3. Conditions • In a classroom setting familiarize yourself with the Commander’s SITREP, 9 Line Medevac, and Visual Signal Techniques

4. Standards • Be familiar with a 9 line medevac request and a commander’s SITREP and Visual Signal Techniques • With the given handouts follow along

5. Commanders SITREP References: FM 100-15; FM 71-3; FM 71-2

6. SITREP (Situation Report) • Used to keep the commander’s higher and lower staff updated and advised on the reporting commander’s critical situation • Are not for general discussion, news reports or unconfirmed rumors • In a field setting can be transmitted over a secure radio or FBCB2 tracker (Force Battle Command Brigade and Below)

7. SITREP FORMAT • LINE 1- DATE AND TIME_________________(DTG) • LINE 2- UNIT________________(Unit making report) • LINE 3- REFERENCE____________________(Provide reference: report title, originator, and DTG) • LINE 4- ORIGINATOR____________________(Unit identification code of the unit originating the report) • LINE 5- REPORTED UNIT__________________(Unit identification code of the reported unit)

8. SITREP FORMAT CONT. • LINE 6- HOME LOCATION_________________(UTM or 6 digit grid coordinate with MGRS grid zone designator for the home location of the reported unit) • LINE 7- PRESENT LOCATION_______________(UTM or 6 digit coordinate with MGRS grid zone designator for the present location of the reported unit) • LINE 8- ACTIVITY_________________________(Brief description of reported unit’s current activity) • LINE 9- EFFECTIVE________________(Commander’s evaluation of the reported unit’s combat effectiveness)

9. SITREP FORMAT CONT. • LINE 10- OWN SITUATION DISPOSITION/STATUS__________________(A summary updating changes to or not previously reported major combatant and support force locations; significant mission readiness degradation on units; current deployments; proposed deployments; changes in task force designations; organization or operational control (CHOP); and projected requirements for additional forces)

10. SITREP FORMAT CONT. • LINE 11- LOCATION______________________(UTM or 6 digit grid coordinate with MGRS Grid Zone Designator • LINE 12- SITUATION OVERVIEW___________(A brief overall assessment of the situation to include circumstances or conditions which increase or materially detract from the capability and readiness of forces assigned or under operational control of the command or service)

11. SITREP FORMAT CONT. • LINE 13- OPERATIONS_____________________(A brief description and results of offensive and defensive operations carried out by major combatant elements during the period of the report; information on allied forces’ operations; summary of plans for combat operations during next 24 hours including objectives and probable enemy reaction; deviations or variations from previously reported intentions/plans

12. SITREP FORMAT CONT. • LINE 14- INTELLIGENCE/RECONNAISSANCE_________(Brief overview of the situation, including operations, order of battle, capabilities, and the threat changes; reference: any significant spot intelligence reports (SPIREPs) or intelligence reports (INTREPs) submitted in previous 24 hours) • LINE 15-LOGISTICS___________________(Significant deficiencies affecting support for planned operations; problem areas beyond the commander’s or services’ capability to overcome or alleviate in a timely manner)

13. SITREP FORMAT CONT. • LINE 16- COMMUNICATIONS/CONNECTIVITY____________ (Significant outages, traffic volume, incompatibilities, and quantitative equipment deficiencies; an assessment of the mission impact caused by communications outages and degradations should be provided by the CINC’s J-6/J-3 staff and contained in this section

14. SITREP FORMAT CONT. • LINE 17- PERSONNEL____________________(Factors affecting readiness of forces/units; mobilization status; daily battle casualties for example: KIA (killed in action); WIA (wounded in action); MIA (missing in action) aggregated by service and impact of all casualties sustained(Battle, nonbattle, critical skills, key personnel upon the commands’ mission capability)

15. 9 Line Medevac References: FM 4-25.11; FM 21-11

16. 9 Line Medevac • Consists of 9 lines of information used to request a casualty evacuation • MEDEVAC request lines 1 to 5 must always be transmitted first, this enables the evacuation unit to begin the mission and avoid unnecessary delay if the information in lines 6 to 9 is not available yet • The information for Lines 6 through 9 should be transmitted as soon as it is available • Keep your radio traffic brief to avoid tying up the channel. • Remember to break after every three lines at the minimum in case the radio operators needs to double-check your information

17. 9 Line Medevac Request Format • LINE 1- Location of pick-up site (Grid zone designator with 8 digit grid) • LINE 2- Radio Frequency, call sign, and suffix (Required so that evacuation vehicle can contact requesting unit while enroute or obtain additional information or changes in situation or directions)

18. 9 Line Medevac Request Format Cont. • LINE 3- Number of patients by precedence: • Urgent- patients who should be evacuated as soon as possible and within two hours to save life, limb, or eyesight • Urgent Surgical- patients who must have surgical intervention to save their life • Priority- patient who should be moved within four hours or condition will deteriorate to such a degree that it will become urgent • Routine- personnel whose condition is not expected to worsen significantly and who will require evacuation in the next 24 hours • Convenience- category assigned to patients for whom evacuation is a matter of medical convenience rather than necessity

19. 9 Line Medevac Request Format Cont. • LINE 4- Special Equipment required: • None • Hoist • Extraction equipment • Ventilator • LINE 5- Number of patients: • Litter • Ambulatory

20. 9 Line Medevac Request Format Cont. • LINE 6- Security at pick-up site: N- no enemy troops in area P- possible enemy troops in area (approach with caution) E- enemy troops in area (approach with caution) X- enemy troops in area (armed escort required) *In peacetime- number and types of wounds, injuries, and illnesses

21. 9 Line Medevac Request Format Cont. • LINE 7- Method of marking pick-up site: • Panels • Pyrotechnic signal • Smoke signal • None • Other

22. 9 Line Medevac Request Format Cont. • LINE 8- Patient nationality and status: • US military • US civilian • Non-US military • Non-US civilian • EPW • LINE 9- NBC contamination: N- Nuclear B- Biological C- Chemical * In peacetime- terrain description of pick-up site

23. Example of a 9 Line Medevac Request • “Delta, this is Echo4, over” • “Echo4, this is Delta, send over” • “This is Echo4, request MEDEVAC, over” • “Roger Echo4, send your request, over” • “Line One – LZ Jaybird 86750055 -Break” • “Line Two-HF 231.45, UHF-114.1 Echo4 -Break” • “Line Three- 2A, 3C – Break” • “Line Four-A – Break” • “Line Five-2L, 3A – Break” • “Line Six-P – Break” • “Line Seven-C – Break” • “Line Eight- A – Break” • “Line Nine- All Clear – Break” • “How Copy my last, Over” • “Roger Echo4, solid copy, stand-by for inbound MEDEVAC plan – over” • “Echo4 standing-by, over”

24. 9 Line Medevac Exercise • Two Volunteers Please • One volunteer will read as the person requesting the 9 line medevac (call sign Echo4) • The other volunteer will read the person receiving the 9 line medevac request (call sign Delta)

25. Communicating Using Visual Signal Techniques References: FM 7-7; FM 17-95; FM 21-60

26. Visual Signaling Techniques • Hand and are signals are given while mounted-vehicle to vehicle, and dismounted-from ground to vehicle or ground to ground. Dismounted signals given from ground to vehicle are normally referred to as “Ground Guide” signals, these are used to communicate to either one element or to an entire unit • Flag signals are used in the same manner as hand and arm signals • Pyrotechnic signals are used either mounted or dismounted to communicate to an entire unit • Ground to air signals are used to guide a helicopter(s) to a landing point

27. Dismounted Visual Signal Commands: Day Ground Guide Signals • START ENGINES or PREPARE TO MOVE • STOP ENGINE • HALT or STOP • MOVE FORWARD • MOVE IN REVERSE (backup) • CHANGE DIRECTION

28. Dismounted Visual Signal Commands Day Ground Guide Signals Cont. • NEUTRAL STEER (tracked vehicles) • INCREASE SPEED • LIGHTS ON- point index finger of both hands toward eyes • LIGHTS OFF • CLOSE DISTANCE BETWEEN VEHICLES AND STOP • RAISE RAMP • LOWER RAMP

29. Night Ground Signals • Are used during periods of darkness or limited visibility. Objects such as a flashlight with a filtered lens or a chemlight are normally used to give signals. Never use a bright light-it will give your position to the enemy

30. Dismounted Ground Guide Signals: Night Ground Guide Signal Commands • START ENGINE • HALT, STOP (moving vehicles) or STOP ENGINE (stationary vehicles) • INCREASE SPEED • TURN • MOVE IN REVERSE (for vehicles which are not moving) or SLOW DOWN (for vehicles which are moving)

31. Rear Ground Guide Signals • Are always used when a vehicle is moving in reverse or neutral steering • The rear ground guide is in command of moving the vehicle when it is moving in reverse and will give his or her visual signals according to the direction he or she wants the front of the vehicle to move

32. Front Ground Guide Signals • The front ground guide is responsible for relaying the signals given by the rear ground guide to the driver of the vehicle • When the rear ground guide is giving a command the front ground guide will create a mirror image of the rear ground guide’s signals. For e.g. when the rear ground guide is giving the command “move in reverse-change direction left”

33. Mounted Visual Signals • Used to control movement and give warning to either an entire unit or a platoon size or larger element within a unit • Track commanders execute the signals to communicate messages between vehicles • When an action or movement is to be executed by less than the total unit, the signaler will point, if necessary, toward the elements of a unit as an “alert” that a signal will follow. However, when a movement or action is to be executed by the entire unit the proper signal should be preceded by the signal “attention”

34. Mounted Visual Signals Cont. • Are performed by “hand and arm” signals or by the use of flags • Hand and arm signals to direct combat formations

35. Mounted Visual Signals Commands • COIL • HERRINGBONE • CONTACT LEFT • CONTACT RIGHT • ACTION LEFT • ACTION RIGHT • AIR ATTACK • NBC ATTACK

36. Mounted Visual Signals: Hand and Arm Signals to Initiate Movement Techniques Commands • TRAVELING • TRAVELING OVERWATCH • BOUNDING OVERWATCH or COVER MY MOVE • MOVE TO LEFT • MOVE TO RIGHT

37. Mounted Visual Signals: Hand and Arm Signals to Control Vehicle Commands • ATTENTION • I AM READY or READY TO MOVE or ARE YOU READY? • MOUNT • DISMOUNT or TAKE A PRONE POSITION • DISREGARD PREVIOUS COMMAND or AS YOU WERE

38. Mounted Visual Signals: Hand and Arm Signals to Control Vehicle Commands Cont. • I DO NOT UNDERSTAND • ADVANCE or MOVE OUT • OPEN UP • CLOSE UP • RIGHT/LEFT TURN • BUTTON UP • UNBUTTON • MESSAGE ACKNOWLEDGED

39. Flag Signal Techniques • Are used to communicate messages between vehicles over distances which are to use standard hand and arm signals. The use of flags must be strictly monitored to prevent the enemy from detecting your position

40. Flag Signal Technique Commands • MOUNT- with the • DISMOUNT • DISMOUNT AND ASSAULT • ASSSEMBLE or CLOSE • MOVE OUT • NBC HAZARD PRESENT

41. Visual Signal Techniques Exercise • Three Volunteers Please • Each Volunteer will perform 1 visual signal technique off the handout