CIT 249 Week 5 Individual Assignment Training Guide: Adding New VLSM Subnets, Network Security and Management, and IPv6

CIT 249 Week 5 Individual Assignment Training Guide: Adding New VLSM Subnets, Network Security and Management, and IPv6 Concepts: Part 3 and Final Submission//tutorfortune.com<br><br>Click on below link to buy<br>https://tutorfortune.com/products/cit-249-week-5-individual-assignment-training-guide-adding-new-vlsm-subnets-network-security-and-management-and-ipv6-concepts-part-3-and-final-submission<br><br>Resources:<br>u2022tCh. 29, "IPv6 Addressing and Subnetting"<br>u2022tCh. 30, "Implementing IPv6 Addressing on Routers"<br>u2022tCh. 31, "Implementing IPv6 Addressing on Hosts"<br>u2022tYour team collaboration<br>u2022tPowerPointu00ae presentations from Weeks Two and Four<br>In Weeks Two and Four, you completed PowerPointu00ae presentations to help the interns on the team. This week, you will combine those presentations with the following presentation to create a Training Guide for the interns. This week's addition will help them understand IPv6, as they're struggling with how different it seems to be from IPv4.<br>Create a Microsoftu00ae PowerPointu00ae presentation containing 10 to 12 new slides. Include detailed speaker notes with each slide. The presentation should help them with the questions they have as follows:<br>u2022tWhy was it necessary to implement IPv6? Logically support your rationale.<br>u2022tHow do you properly abbreviate an IPv6 address? Provide a detailed example.<br>u2022tWhat two 64-bit parts are contained in an IPv6 address, and what does each part represent? Provide a detailed example.<br>u2022tWhat is the difference between an anycast address and a unicast address? Logically describe the important differences.<br>u2022tHow can you easily identify IPv6 multicast addresses? Provide a good example.<br>u2022tWhat commands are used to apply initial router configurations? Provide an example from one of the labs.<br>u2022tWhat commands are used to apply the VLANs and Trunk configurations? Provide an example from one of the labs.<br>Combine these slides with the slides from Weeks Two and Four. Add in Training Guide Introduction, Conclusion, and Reference slides.<br>The slides from Weeks Two and Four covered the following:<br>Week Two:<br>u2022tA concise overall description of an IPv4 based WAN<br>u2022tAn accurate depiction of how to calculate a subnet ID and subnet broadcast address<br>u2022tA clear explanation of how to test for overlap in a VLSM scheme and troubleshoot issues that may arise from the overlap<br>u2022tA complete step-by-step illustration of how to add a new subnet<br>Week Four:<br>u2022tAccurately describe the uses of ACLs, NAT, and PAT<br>u2022tIdentify best practices to secure your network. Provide at least three best practices.<br>u2022tCompletely Identify security features and commands needed to implement the security best practices recommended<br>u2022tA complete step-by-step illustration of how to configure the security features on a router<br>u2022tIdentify troubleshooting tools needed to verify and manage your security settings. Identify at least three tools.<br>Overall, the presentation will have 10 to 12 new slides, the slides from Weeks Two and Four (12 to 16 slides), plus new Introduction, Conclusion and Reference slides.<br>All references need to adhere to APA guidelines, and images should not be copied unless author permission is obtained or copyright free images are used.<br>Submit your assignment using the Assignment Files tab.<br><br>Click on below link to buy<br>https://tutorfortune.com/products/cit-249-week-5-individual-assignment-training-guide-adding-new-vlsm-subnets-network-security-and-management-and-ipv6-concepts-part-3-and-final-submission<br><br><br><br>

museka + Follow