1 / 8

Proper Pre-Powder Coating Instructions for Rudder Pedal Attachment

Before powder coating, ensure all required bushings and hardware are plugged to prevent damage. Follow specific guidelines provided for a successful coating process. Pay attention to critical areas to maintain functionality.

mwinton
Download Presentation

Proper Pre-Powder Coating Instructions for Rudder Pedal Attachment

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Please plug the 4 rudder pedal attachment bushings prior to powder coat also plug all nut plate holes

  2. 7 4 3 2 27 15 6 16

  3. No powder coat or sand blast in the bearing cage the control stick (#16)

  4. Please plug this area prior to powder coat on both rudder pedals (#12) No powder coat or sand blast here if the rudder pedal has to be disassembled (#12)

  5. 27 20 14 23 22 13 25 6 26 17 24 18

  6. No powder coat in the hinge area between the inside edges of the each collar of the elevators (#2).

  7. 16 15 7 5 11 9 6 21 10 8

  8. 9.625 in 10.4375 in No powder coat in the shaded area shown above: bounded from 9-5/8” to 10-7/16” measured from the back of torque tube (#15).

More Related