Mxgraphics - Completing the Perfect Look For Your Bike

1. Mxgraphics - Completing the Perfect Look For Your Bike

2. Are you thinking about giving your bike the perfect look? If yes, then you must have thought of some options. For example, it is very likely you may have considered some fanciful drawing on your bike using the paint. But some experts say that paint is not always a good option. Instead, they say it is better to choose the decals. A bike covered in stunning decals stand apart from the rest. Also, in some way it increases your confidence. That is why it is a great idea to cover your bike with some graphics.

3. Preparing your bike is important Even if you have chosen the highest quality graphic for your bike, it will not look perfect unless you have prepared the surface of the bike. Plastic is the most prominent surface material over the entire area of the bike. This is why you need to first prepare the plastic to get the best results. For example, before applying the top-grade Mxgraphics by MxProDecals make the surface of the plastic suitable for it. Look for any scratches on the plastic. If the scratches are minor they will not make any difference. You can simply polish the area first. However, if the damage is significant you may need to change the plastic before applying the graphic.

4. Removing the old decal If your bike is brand new you can get started with the Mxgraphics by MxProDecals immediately. However, if you already have old decals then you will first need to get rid of them. Thankfully, removing the previous graphic is not that difficult. You can do that easily with the help of the hair dryer. If there is some residue still remaining after removing the decal, you can use a strong cleaner but to remove it. But make sure that the cleaner is made for the bike material and does not damage it. Once everything is removed, clean the surface area using water and soap. Rinse it thoroughly and allow it to dry.

5. Placing the images for that perfect look First things first! If you are applying the decal for the first time to your bike, make sure that you read the instructions carefully. If the kit did not come with any instructions, find them on the internet. It is easy to apply the graphic but you have to make sure that nothing goes wrong. Before starting to apply the images, you will first need to warm the plastic up. You can do that with the heat gun. This is especially helpful when you are placing the complicated decals. It will allow you to peel out only a small part of the sticker. This will also help you line the image correctly. Do not be in a rush while applying the sticker. Peel it off slowly, bit by bit. Make sure that you also remove the air bubbles while applying the sticker. So, here are you are with a bike that looks perfect. The custom made graphics for your bike give it your personal signature. It is something that you are bound to fall in love with.

6. MXProDecals 684-2010 zapote, san jose Costa Rica +50683468103 info@mxprodecals.com http://www.mxprodecals.com/