370 likes | 944 Views
AutoCAD 2D1. By : Cesar Mendoza. Draw the Borderline and Title Block. Draw border line 15mm from edge of paper. 15 mm. Draw title block 15 mm away from bottom border line. 330 mm. 265 mm. 200 mm. 100 mm. Draw guideline for the title block: Name, title, section . 330 mm. 265 mm. 200 mm.
E N D
AutoCAD 2D1 By : Cesar Mendoza
Draw title block 15 mm away from bottom border line 330 mm 265 mm 200 mm 100 mm
Draw guideline for the title block: Name, title, section 330 mm 265 mm 200 mm 100 mm
Write your name and complete the inforamtion in the title block MOHAMMED AL SHAMSI
Get the center of the working space by striking thin diagonal line from the corner 200 mm
Draw a 45 degree diagonal line passing to the center of the circle
Draw the broken line and make a square passing to the diagonal lines.
Draw the first “V” inside the circle, vertex on the horizontal line (use thick line or object line)
Draw the second “V” inside the circle, vertex on the vertial line (use thick line or object line)
Make a square with the corners on the horizontal and vertical centeline
Locate center of the working space on the second box by striking thin diagonal line from the corner 200 mm
From the center measure 50mm below and construct a thin line 50 mm
From the end of the line strike arc to get the center of the circle
From the other end of the line strike arc to get the center of the arc.
From the end the line strike arc to get the point of the hexagon