Occupational Safety and Health Act OSHA

1. Occupational Safety and Health Act OSHA

2. Discussion Points • Purpose and Scope of OSHA • CFR Titles, Parts, Subparts – The Code • Parts 1903, 1904, 1910 • Resources

3. Purpose and Scope The Williams-Steiger Occupational Safety and Health Act of 1970 requires, in part, that every employer covered under the Act furnish to his employees, employment and a place of employment which are free from recognized hazards that are causing or are likely to cause death or serious physical harm to his employees.

4. The Requirement • Employers comply with occupational safety and health standards promulgated under the Act, and that employees comply with standards, rules, regulations and orders issued under the Act which are applicable to their own actions and conduct.

5. Authorization The Act authorizes the Department of Labor to conduct inspections, and to issue citations and proposed penalties for alleged violations.

6. Let’s Break Down the Code The CFR’s are broken down into: • Titles • Parts • Subparts • Sections

7. CFR Titles The Federal Code of Regulations contains 50 Titles, numerically indexed as 1 to 50. All are contained in the Federal Register. Examples: Title 1 - General Provisions Title 2 - Reserved Title 3 - The President Title 17 - Commodity and Securities Title 29 - Labor Title 49 - Transportation Title 50 - Wildlife and Fisheries

8. Parts The Titles are broken down into “Parts.” Examples: Title 29 – Part 1910 – General Industry Regulations This is the “Part” that pertains to your safety program.

9. Subparts Parts are further broken down into “Subparts.” Since 29 CFR 1910 “Subparts” A to Z pertain to us, lets look at it. Within 29 CFR 1910, we break down areas of compliance into “Subparts.” Example: Subpart A - General Subpart D - Walking and Working Surfaces Subpart I - Personal Protective Equipment Subpart L - Fire Protection

10. Sections Subparts are further broken down into “Sections.” This is the basic unit of the CFR. Example: 29 CFR 1910 Subpart L – Fire Protection “Section 157” pertains to Portable Fire Extinguishers. It would be referenced as: 29 CFR 1910.157 Generally the “Subpart” will not be listed in a reference.

11. 29 CFR 1903, 1904 and 1910 • The three Parts under Title 29 that mainly pertain to what you do is: • 1903 – Inspections, Citations, & Proposed Penalties • 1904 – Recording and Reporting Occupational Injuries and Illness • 1910 – Occupational Safety and Health Standards

12. Part 1903 Under the Act, “upon presenting appropriate credentials to the owner, operator or agent in charge,” an OSHA compliance officer is authorized to: • “Enter without delay and at reasonable times any factory, plant, establishment, construction site or other areas, workplace, or environment where work is performed by an employee of an employer; and to

13. “Inspect and investigate during regular working hours and at other reasonable times, and reasonable limits and in a reasonable manner, any such place of employment and all pertinent conditions, structures, machines, apparatus, devices, equipment and materials therein, and to question privately any such employer, owner, operator agent or employees.” Inspections are conducted without advance notice.

14. Inspection Priorities • Imminent Danger – Imminent danger situations are given top priority. Imminent danger is any condition where there is reasonable certainty that a danger exists that can be expected to cause death or serious physical harm immediately, or before the danger can be eliminated through normal enforcement procedures.

15. Catastrophes and Fatal Accidents – Second priority is given to investigation of fatalities and catastrophes resulting in hospitalization of three or more employees. Such situations must be reported to OSHA by the employer within 8 hours. Investigations are made to determine if OSHA standards were violated and to avoid recurrence of similar accidents.

16. Employee Complaints – The third priority is given to employee complaints of alleged violation of standards or of unsafe or unhealthful working conditions.

17. Programmed High-Hazard Inspections – Next priority are programmed, or planned inspections aimed at specific high-hazard industries, occupations or health substances. Industries are selected for inspection on the basis of factors such as death, injury and illness incidence rates, and employee exposure to toxic substances.

18. Citations After the compliance officer reports the findings, the OSHA Area Director determines what citations, if any will be issued, and what penalties, if any, will be proposed. Citations inform the employer and employees of the regulations and standards alleged to have been violated and the proposed length of time set for their abatement. The employer will receive citations and notices of proposed penalties be certified mail. The employer must post a copy of each citation at or near the place a violation occurred for three days or until the violation is abated, whichever is longer.

19. Penalties • Other Than Serious Violation – A violation that has a direct relationship to job safety and health, but probably would not cause death or serious physical harm. A proposed penalty of up to $7,000 for each violation is discretionary. A penalty for an other-than-serious violation may be adjusted downward by as much as 95% depending on the employer’s good faith history of previous violations, and size of business. When the adjusted penalty amounts to less than $100, no penalty is proposed.

20. Serious Violation – A violation where there is substantial probability that death or serious physical harm could result and that the employer knew, or should have known of the hazard. A mandatory penalty of up to $7000 for each violation is proposed. A penalty for a serious violation may be adjusted downward, based on the employer’s good faith, history or previous violations, the gravity of the alleged violation and the size of the business.

21. Willful Violation – A violation that the employer knowingly commits or commits with plain indifference to the law. The employer either knows that what he or she is doing constitutes a violation, or is aware that a hazardous condition existed and made no reasonable effort to eliminate it. Penalties up to $70,000 may be proposed for each willful violation, with a minimum penalty of $5,000 for each violation. A proposed penalty for a willful violation may be adjusted downward, depending on the size of the business and it’s history of previous violations. Usually, no credit is given for good faith.

22. Willful Violation cont. If an employer is convicted of a willful violation of a standard that has resulted in the death of an employee, the offense is punishable by a court-imposed fine or by imprisonment for up to six months, or both. A fine of up to $250,000 for an individual, or up to $500,000 for a corporation, may be imposed for a criminal conviction.

23. Repeated Violation – A violation of any standard, regulation, rule or order where, upon re-inspection, a substantially similar violation can bring a fine of up to $70,000 for each violation. To be the basis of a repeated citation, the original citation must be final; a citation under contest may not serve as the basis for a subsequent repeated citation.

24. Failure to Abate Prior Violation – Failure to abate a prior violation may bring a civil penalty of up to $7,000 for each day the violation continues beyond the prescribed abatement date.

25. Other Violations • Falsifying records, reports or applications can bring a fine of $10,000 or up to six months in jail, or both. • Violations of posting requirements can bring a civil penalty of up to $7,000 • Assaulting a compliance officer, or otherwise resisting, opposing, intimidating, or interfering with a compliance officer while they are engaged in the performance of their duties is a criminal offense, subject to a fine of not more than $5,000 and imprisonment for not more than three years.

26. De Minimis Violation De minimis violations are violations of standards which have no direct or immediate relationship to safety or health. Whenever de minimis conditions are found during an inspection, they are documented in the same way as any other violation, but are not included on the citation.

27. Example of A De Minimis Violation • 29 CFR 1910.27 (b) (1) allows 12 inches maximum distance between ladder rungs. Where the rungs are 13 inches apart, the condition is de minimis.

28. Appeal • By employee – If an inspection was initiated due to an employee complaint, the employee or authorized employee representative may request an informal review of any decision not to issue a citation. • By employer – When issued a citation or notice of a proposed penalty, an employer may request an informal meeting with OSHA’s area director to discuss the case.

29. Part 1904 • Purpose – The purpose of Part 1904 is to require employers to record and report work-related fatalities, injuries and illnesses.

30. Recording or reporting a work-related injury, illness, or fatality does not mean that the employer or employee was at fault, that an OSHA rule has been violated, or that the employee is eligible for workers compensation or other benefits.

31. Forms Used • 300 Log – Used to record injuries or illnesses • 300A – Summary of Work-Related Injuries and Illnesses Posted from Feb. 1 to April 30 of the following year • 301 – Injuries and Illness Incident Report

32. Who Is Required To Report If your company had 10 or fewer employees at all times during the last calendar year, you do not need to keep OSHA injury and illness records unless OSHA or the BLS informs you in writing that you must keep records. However, as required by 1904.39, all employers covered by the OSH Act must report to OSHA any workplace incident that results in a fatality or the hospitalization of three or more employees.

33. Partially Exempt Industries Employers are not required to keep OSHA injury and illness records for certain establishments classified by their Standard Industrial Classification (SIC) codes, unless asked in writing by OSHA to do so.

34. Examples SIC CodeIndustry 525 Hardware Stores 542 Meat and Fish Markets 793 Bowling Centers 81 Legal Offices 724 Barber Shops

35. Where Do You Record Injuries? OSHA has a form called the 300 Log. Your Safety Coordinator is responsible for completing the log for each injury or illness that is deemed “recordable.” Not all injuries are recordables. There is criteria that must be met to be a recordable.

36. What Is A “Recordable” To be an OSHA recordable, the injury must meet the following criteria. • Death • Days away from work • Restricted work or transfer to another job • Loss of consciousness • A significant injury or illness diagnosed by a physician or other licensed health care professional • Medical treatment beyond first aid

37. What is Considered “First Aid” • Using a non-prescription medication at non-prescription strength • Administering tetanus immunizations • Cleaning, flushing or soaking wounds on the surface of the skin • Using wound coverings such as bandages, band-aids, gauze pads or using butterfly or steri-strips cont.

38. What is Considered “First Aid” • Using hot or cold therapy • Using any non-rigid means of support, such as elastic bandages, wraps, non-rigid back belts • Using temporary immobilization devices while transporting accident victims • Drilling of a fingernail or toenail to relieve pressure • Using eye patches cont.

39. What is Considered “First Aid” • Removing splinters or foreign material from areas other than the eye by irrigation, tweezers, cotton swabs or other simple means • Using finger guards • Using massages • Drinking fluids for relief of heat stress

40. Part 1910 29 CFR 1910 is the Occupational Safety and Health Standard for General Industry. These are the rules and regulations that we follow to keep our workers safe.

41. Subparts Within 1910 there are 26 Subparts A to Z Each Subpart pertains to a different function of general industry.

42. Examples Subparts: • A – General • D – Walking and Working Surfaces • E – Means of Egress • H – Hazardous Materials • I – Personal Protective Equipment • L – Fire Protection cont.

43. N – Materials Handling and Storage • O – Machinery and Machine Guarding • Q – Welding, Cutting, and Brazing

44. Resources www.osha.gov