1 / 36

Chapters 11&20 Mass Spectrometry 1 Mass Spectrometry

Chapters 11&20 Mass Spectrometry 1 Mass Spectrometry. Ionization of gas phase molecules followed by analysis of the mass-to-charge ratios of the ions produced Mass spectrum: ion intensities vs. mass-to-charge ratio (m/z) - Nominal MW = 28 Actual MW C 2 H 4 + = 28.0313

nancymjackson
Download Presentation

Chapters 11&20 Mass Spectrometry 1 Mass Spectrometry

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chapters 11&20 Mass Spectrometry1 Mass Spectrometry • Ionization of gas phase molecules followed by analysis of the mass-to-charge ratios of the ions produced • Mass spectrum: ion intensities vs. mass-to-charge ratio (m/z) - Nominal MW = 28 Actual MW C2H4+ = 28.0313 CH2N+ = 28.017 N2+ = 28.0061

  2. Chapters 11&20 Mass Spectrometry1 Mass Spectrometry Fragment peaks Fragment peaks Unit: amu or dalton Fig. 20-1 (p.551) Mass spectrum of ethyl benzene

  3. 2 Instrumentation • Sample inlet system – vaporize sample • Ion source – ionizes analyte gas molecules • Mass analyzer – separates ions according to m/z • Detector – counters ions • Vacuum system – reduces collisions between ions and gas molecules 10-5 -10-8 Fig. 20-11 (p.564) Components of a mass spectrometer

  4. 2.1 Sample inlet 2.1.1 External (Batch) inlet systems • Liquid • Gas 2.1.2 Direct probe • Non-volatile liquid • Solid Fig. 20-12 (p.564) Sample inlet

  5. 2.1.3 Chromatography/Electrophoresis - Permits separation and mass analysis • How to couple two techniques? GC/MS, Fig. 27-14 (p.799) Capillary GC-MS

  6. HPLC/MS, nano flow, ESI Adapted from http://www.bris.ac.uk/nerclsmsf/techniques/hplcms.html

  7. 2.2 Ion sources

  8. Hard ionization leaves excess energy in molecule – extensive fragmentation Soft ionization little energy in molecule – reduced fragmentation Fig. 20-2 (p.553) Mass spectrum of 1-decanol from (a) a hard ionization source (electron impact) and (b) a soft ionization (chemical ionization)

  9. 2.2 Ion sources

  10. 2.2.1 Gas-phase ion source (1) Electron Impact (EI) Electron bombardment of gas/vapor molecules Fig. 20-3 (p.553) An electron-impact ion source

  11. EI: M + e- (~70 eV) M+ + 2e- (~ 10-4% ionized) Hard source (incident energy 70 eV >> chemical bond) • Molecules excited {electronically, vibrationally and rotationally} • Extensive fragmentation  fragment ions • Base peak m/z << M+ Advantages: convenient & sensitive complex fragmentation helps identification of molecular structure Disadvantages: weak or absent M+ peak inhibits determination of MW molecules must be vaporized (MW < 1000 amu), and must be thermally stable {during vaporization}

  12. (2) Chemical ionization (CI) • EI ionization in excess (105 of analyte pressure) of reagent gas (methane) to generate CH4+ and CH3+, then CH4+ + CH4 CH5+ + CH3 CH3+ + CH4  C2H5+ + H2 Ions reacts with analyte CH5+ + A  CH4 + AH+ proton transfer C2H5+ + A  C2H4 + AH+ proton transfer C2H5+ + A  C2H6 + (A-H)+ hydride elimination - analyte most common ions (M+1)+ and (M-1)+ sometimes (M+17)+ addition of CH5+ or (M+29)+ (addition of C2H5+) Adapted from Schröder, E. Massenspektrometrie - Begriffe und Definitionen; Springer-Verlag: Heidelberg, 1991.

  13. 2.2.2 Desorption/Ionization sources (For non-volatile or non-stable analytes) (1) Electrospray ionization (ESI): explosion of charged droplets containing analyte - solution of analyte pumped through charged (1-5 kV) capillary - small droplets become charged - solvent evaporates, drop shrinks, surface charge density increases - charge density reduced by explosion of charged analyte molecules (“Coulomb explosion”) Soft ionization – transfer existing ions from the solution to the gas phase, little fragmentation Easily coupled to HPLC Adapted from http://www.bris.ac.uk/theory/fab-ionisation.html

  14. Fig. 20-9 (p.562) Apparatus for ESI

  15. Important technique for large (105 Da) thermally fragile molecules, e.g., peptide, proteins • produce either cations or anions. • Analytes may accumulate multiple charges in ESI, M2+, M3+ … • molecular mass = m/z x number of charges Fig. 20-10 (p.563) Typical ESI MS of proteins and peptides.

  16. (2) Fast atom bombardment (FAB) - Sample in glycerol matrix - Bombarded by high energy Ar or Xe atoms ( few keV) - Atoms and ions sputtered from surface (ballistic collision) - Both M+ and M- produced - Applicable to small or large (>105 Da) unstable molecule Comparatively soft ionization – less fragmentation Adapted from http://www.bris.ac.uk/theory/fab-ionisation.html

  17. (3) Matrix-assisted laser desorption/ionization (MALDI) - analyte dispersed in UV-absorbing matrix and placed on sample plate - pulsed laser struck the sample and cause desorption of a plume of ions, - energy absorption by matrix, transfer to neutral analyte desorption of matrix and neural analyte ionization via PT between protonated matrix ions and neutral analyte Fig. 20-7 (p.560) Diagram of MALDI progress.

  18. MALDI spectrum contains: dimmer, trimmer, multiply charged molecules no fragmentation, Soft ionization Fig. 20-8 (p.561) MALDI-TOF spectrum from nicotinic acid matrix irradiated with a 266-nm laser beam.

  19. Matrix: small MW absorb UV able to crystallize

  20. 2.3 Mass analyzer (separate ions to measure m/z and intensity) Resolution: - ability to differentiate peaks of similar mass R = mean mass two peaks / separation between peaks = (m1+m2)/2(m1-m2) • Resolution depends on mass R=1000, able to separate 1000 & 1001, or 100.0 & 100.1, or 10000& 10010 • High resolution necessary for exact MW determination • Nominal MW =2 8 • Actual MW C2H4+ = 28.0313 • CH2N+ = 28.017 • N2+ = 28.0061, R > 2570

  21. Kinetic energy of ion: KE = zeV = 1/2m2 Magnetic force: FB = Bze Centripetal force: Fc = m2/r Only for ions with FB = FC can exit the slit m/z = B2r2e/2V For fixed radius & charge - use permanent magnet, and vary A and B potential V - Fixed V, vary B of electromagnet 2.3.1 magnetic sector analyzers Fig. 20-13 (p.567) Schematic of a magnetic sector spectrometer.

  22. 2.3.2 Double-focusing analyzers single-focusing magnetic sector analyzers Rmax < 2000, because of the ions (a) have initial translational energy (Boltzmann distribution) (b) angular distribution Adding an electrostatic analyzer to simultaneously minimize broadening from (a) and (b) Electrostatic analyzer focuses ions of unique m/z at entrance slit to magnetic sector

  23. “”””””””””””””””””””””””””””””””””””“””””””””””””””””””””””””””””””””””” Fig. 20-14 (p.569) Nier-Johnson design of a double-focusing mass spectrometer

  24. 2.3.2 quadrupole analyzer Ions travel parallel to four rods Opposite pairs of rods have opposite VRFcos(2ft) and UDC Ions try to follow alternating field in helical trajectory VRFcos(2ft) UDC Fig. 11-6 (p.283) A quadrupole mass spectrometer

  25. VRFcos(2ft) + UDC Fig. 11-7 (p.288) operation of a quadrupole in xz plane

  26. Stable path only for one m/z value for each field frequency UDC= 1.212mf2r02 VRF= 7.219mf2r02 UDC /VRF = 1.212/7.219 = 0.1679 R=0.126/(0.16784-UDC/VRF) • Harder to push heavy molecule – m/zmax < 2000 • Rmax ~ 500 Fig. 11-7 (p.288) Change of UDC and VRF during mass scan

  27. 2.3.3 Time-of-flight (TOF) analyzer Fig. 11-10 (p.290) A TOF mass spectrometer

  28. Unlimited mass range m/zmax > 100 kDa Poor resolution Rmax < 1000 Poor sensitivity

  29. 2.4 Detectors 2.4.1 Electron Multipliers Fig. 11-2 (p.284) Electron multiplier

  30. 2.4.2 Microchannel Plates (MCP) Fig. 11-4 (p.286) MCP

  31. 3 Application of MS Identification of Pure compounds • Nominal M+ peak (one m/z resolution) (or (M+1)+ or (M-1)+) give MW (not EI) • Exact m/z (fractional m/z resolution) can give stoichiometry but not structure (double-focusing instrument) • Fragment peaks give evidence for functional groups (M-15)+ peak  methyl (M-18)+  OH or water (M-45)+  COOH series (M-14)+, (M-28)+, (M-42)+…  sequential CH2 loss in alkanes • Isotopic peaks can indicate presence of certain atoms Cl, Br, S, Si • Isotopic ratios can suggest plausible molecules from M+, (M+1)+ and (M+2)+ peaks 13C/12C = 1.08%, 2H/1H = 0.015% (M+1) peak for ethane C2H6 should be (2x1.08) + (6x0.015)=2.25% M+ peak (f) Comparison with library spectra

  32. What about peaks at greater m/z than M+? • Two sources • Isotope peaks –same chemical formula but different masses • 12C1H235Cl2 m=84 • 13C1H235Cl2 m=85 • 12C1H235Cl37Cl m=86 • 13C1H235Cl37Cl m=87 • 13C1H237Cl2 m=88 • Heights vary with isotope abundance 13C 1.08%, • 2H is 0.015%, 37C is 32.5% CH2Cl2, 13C, 1 x 1.08 = 1.08 37Cl, 2 x 32.5% 2H, 2 x 0.015 = 0.030% (M+1)+/M+ = 1.21% (M+2)+/M+ =65% Fig. 20-4 (p.556) EI mass spectra of methylene chloride and 1-pentanol

  33. 4 Summary One of the most powerful analytical tools Sensitive (10-6 -10-13g) Range of ion sources for different situation Element comparison for small and large MW –biomolecules Limited structural information Qualitative and quantitative analysis of mixtures Composition of solid surfaces Isotopic information in compounds But Complex instrumentation Expensive: high resolution Structure obtained indirectly Complex spectra/fragmentation for hard ionization sources Simple spectra for soft ionization sources

More Related