1 / 24

HOLOGRAPHIC MEMORY

HOLOGRAPHIC MEMORY. Computer Storage. Mass Storage is generally defined as a means of preserving computer generated information for subsequent use or retrieval. What will be the next logical step in computer storage ?. Serial Access. Random Access.

nanji
Download Presentation

HOLOGRAPHIC MEMORY

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. HOLOGRAPHIC MEMORY

  2. Computer Storage Mass Storage is generally defined as a means of preserving computer generated information for subsequent use or retrieval.

  3. What will be the next logical step in computer storage ? Serial Access Random Access Parallel Access Is The Ability To Put Information In Any Form, And Take It Out At The Same Rate. In Other Technologies, We Get One Bit Stream At A Time. Higher Bandwidth Is The Result. ? Parallel Access

  4. What is Holographic Memory? • Holographic memory is a three-dimensional data storage system that can store information at high density inside the crystal or photopolymer. • It is a memory that can store information in the form of holographic image (hologram). • Like other media, holographic media is divided into write once (where the storage medium undergoes some irreversible change), and rewritable media (where the change is reversible).

  5. History Using holograms as memory storage was first proposed by Pieter Heerden in the 1960s. During the early 1970s, a group of scientists from TRCA laboratories succeeded in storing 500 holograms using an iron doped litium niobate crystal. Moreover, they were also able to store five hundred fifty high-resolution hologram images using a material made up of light sensitive polymer. The high cost of the materials needed for this type of technology as well as the rise of magnetic and optical drives shelved the project in the end.

  6. Working Principle • In holographic data storage, an entire page of information is stored at once as an optical interference pattern within a thick, photosensitive optical material. • This is done by intersecting two coherent laser beams within the storage material. • The first, called the object beam, contains the information to be stored; the second, called the reference beam, is a simple light wave. • When the two combine in an optical storage medium, they change the chemical or physical construction of that medium and so store the data. • If the storage medium is then illuminated with the reference beam again, the object data beam is produced.

  7. HDS Components • Laser • Spatial Light Modulator (SLM) • Multiplexing agent • Storage Medium • Charge Coupled Device (CCD)

  8. Laser Blue-green argon laser which is split into two beams, a reference beam and an object beam. The interference pattern created by these two beams forms the hologram.

  9. Spatial Light Modulator SLM is a 1024 * 1024 array of light or dark squares. This array represents the data to be stored, and is usually implemented by a set of pixels on an LCD. An SLM can usually be refreshed at rates of about 1000 frames per second.

  10. Multiplexing Agent It is used to allow the laser beam to access different pages in the hologram. Two types of multiplexing, shift multiplexing and angular multiplexing Shift Multiplexing uses a rotating disk to vary the angle of the laser beam, and so access a different view of the hologram. Angular multiplexing uses mirrors to change the angle at which the laser strikes the crystal.

  11. Storage Medium Two storage mediums are, • Lithium-niobate crystals • Photopolymer

  12. Charge Coupled Device (CCD) CCD is an array of sensors which corresponds to the pixels on the SLM. The CCD is used to read the interference pattern from the reference beam, and so read the information from the hologram. The matrix construction of the CCD allows it to read all 1Mb of the data at once. Typical CCD dimensions are one square centimeter, and typical access rates are 1000 frames / second, or 1 Gigabit / second.

  13. Recording data

  14. Reading data

  15. Holographic Versatile Disc • HVD is an advanced optical disk that’s presently in the development stage. • It can transfer data at the rate of 1 Gigabit per second. • The technology permits over 10 kilobits of data to be written and read in parallel with a single flash. • The disk will store 1 terabyte (TB) of data on a single optical disk.

  16. Holographic Versatile Disc structure 1. Green writing/reading laser (532 nm)2. Red positioning/addressing laser (650 nm)3. Hologram (data)4. Polycarbon layer5. Photopolymeric layer (data-containing layer)6. Distance layers7. Dichroic layer (reflecting green light)8. Aluminium reflective layer (reflecting red light)9. Transparent baseP. PIT

  17. Comparison With Other Storage Devices

  18. ADVANTAGE • Entire page of data can be retrieved quickly and at one time. • Offers storage of 1 TB of data. • It offers high density storage. • Its transfer rate is so high that a person can easily load the required data. • Resistance to damage

  19. Tapestry 300r holographic storage Developed by InPhase Technologies

  20. Conclusion • Holographic Data Storage disk will be the next technological revolution. • The page access of data that holographic memory creates will provide a window into next generation computing by adding another dimension to stored data. • The large cost of high-tech optical equipment would make small-scale systems implemented with holographic memory impractical.

  21. Thank You Francis Sajay K P

More Related