1 / 9

NAVY METCAL

NAVY METCAL. Metrology and Calibration (Science of Measurement and How to make GOOD measurements). NAVY Calibration Program.

nasim-gonzales
Download Presentation

NAVY METCAL

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. NAVY METCAL Metrology and Calibration (Science of Measurement and How to make GOOD measurements)

  2. NAVY Calibration Program • This program was set up and is operated to ensure that test equipment used by the Navy is in good working order, provides adequate service and produces accurate numbers used to verify the nominal operation of complex and critical systems that support the Operational Fleet and related programs.

  3. Test Equipment

  4. PERSONNEL

  5. STANDARDS

  6. Quality Program • Mandated NAVSEA program • Instruction NAVSEA 04-4734 • Command Capability Certification • Quality Management • Technical Oversight • Assigned Cognizant Engineering Support • External and Internal Audits

  7. The Cycle Requires Support ACT • The prescription for a High Performing depot calibration program is a well trained adequately staffed laboratory and support staff. Each lab visited that lacks the necessary staff has limited ability to ACT on identified improvements.

  8. Current Program If no additional workload is expected Identify Engineering support for Mechanical Calibration Plan Engineering support for Electronic Calibration Implement improved oversight and reporting Future Program Quantify future calibration workload Identify Key Support Challenges Document staffing plan for key positions Update local instructions and SOP for new staffing structure The Future

  9. NOTE: The Initial planning for the Regional calibration proposal of 1995 was developed in 1992, rejected by SY management and resubmitted as the 1996 RMC proposal for NW Calibration Consolidation. This proposal was rejected and resubmitted as the NW Regional Plan in 1998 (MAY). (Nearly ten years ago) Work needs to begin for a plan to exist that can be followed. This plan was not fully implemented by PSNS or SWFPAC or the Region. Currently no recently planned improvements are underway, no current studies exist concerning the actual workload, staffing or facilities.

More Related