1 / 24

Wm Canning Ltd

neith
Download Presentation

Wm Canning Ltd

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

    1. Wm Canning Ltd Marston Bentley Div. Simon McManus

    2. Offshore Fluids Production Control Fluids Exploration Control Fluids Motion Compensator Fluids Drilling Mud Additives Antifoams

    3. Wm. Canning B.S.I. Registered to ISO 9001 for manufacture, delivery and research. Facilities include the QC lab, R&D lab, Fluids test lab and Hydraulic test lab.

    4. Wm Canning Ltd Manufacturing sites in Wigan, England and Houston Texas. Storage in Aberdeen, Great Yarmouth, Bergen, Stavanger, Port Elizabeth S. Africa, Rio De Janeiro, Singapore and Perth Australia.

    5. Exploration Products BOP control fluid concentrates. Motion Compensator Hydraulic Fluids Drilling Mud Additives

    6. History of BOP fluids Closed systems used hydraulic oil. Open systems started to use soluble mineral oil Fully synthetic soluble polymers are more stable more environmentally acceptable and non flammable

    7. Erifon HD 856 100:1 BOP Fluid Concentrate. Workhorse of the industry for over 15 years Used by all major drilling contractors and equipment suppliers Excellent track record Market leader world-wide

    8. Erifon HD603 Has all the properties in Erifon HD856 Developed to meet current and future environmental regulations Has been tested by major valve manufacturers and approved for use in their systems.

    9. BOP Fluid Maintenance Correct Dilution is of up-most importance. Dilution test kits will be provided Correct dilution prevents poor lubrication corrosion potential microbiological attack Wm Canning give a free fluid monitoring service.

    10. Erifon Systems Cleaner Total kill is essential (use 2% for 48hrs) Will remove oil and grease where bacteria grow Foaming the fluid will help get to inaccessible places. Protective clothing must be worn Can Not be discharged.

    11. Environmental Testing Full HOCNF information available in line with PARCOM on all Erifon products. Erifon hd603 is the least toxic bop fluid known. SFT and the DTI through the OCNS allows discharge of all the oceanic fluids.

    12. Leak Detection Soluble oils give a white plume when discharged into the ocean. Such as Oceanic LTF (Leak Tracer Fluid) More acceptable is the use of fluorescent dye. This can be detected by an Ultra-Violet (UV) lamp on an ROV.

    13. Erifon Pilot Line Fluid Developed to prevent poor water and mixing damaging the pilot line system Ready to use Increases reliability

    14. Erifon 818 Motion Compensator Fluid. Market leader for over 15 years First water-based fluid to replace old phosphate ester fluids excellent track record

    15. Vapour Phase Corrosion Testing

    16. Vapour Phase Corrosion Testing

    17. Compression Ignition of Compensator fluids HSE recommended test carried out by Bundesantalt Fur Materialprufung Germany. Erifon 818/Compenol was the first fluid tested and was approved by the International Association of Drilling Contractors in 1986

    18. Compression Ignition of Compensator fluids

    19. Compression Ignition of Compensator fluids

    20. Erifon 818L Low viscosity version of Standard Erifon 818 Developed in conjunction with a major motion compensator manufacturer. For use in cold climates

    21. Erifon 818TLP Added high pressure lubrication for Tension Leg Platforms Required due to higher loads and different types of motion Developed in conjunction with a major motion compensator manufacturer

    22. Erifon Topside HFC Water-based hydraulic oil Designed to replace standard ISO 46 hydraulic oil For use in cranes and pipe moving equipment. Negates the need for bunding as full HOCNF information is available.

    23. General Rules For Water-based Fluids Do not use oil based greases, use glycol based greases such as Oceanic ACL or Silicone grease. Keep the bulk fluid temperature below 60°C Do not use water absorbent seals or filters.

    24. Drilling Mud Additives Lo-Tork Products used all over the world. Lo-Tork Envirolube for ecological sensitive areas. Wm Canning are leading the R&D for silicate muds and wireline lubrication.

More Related