1 / 4

Serial Products Troubleshooting

Serial Products Troubleshooting. Troubleshooting Steps. 1. Verify RS-232 Communication 2. Verify ESTeem Commands 3. Test SWR 4. Measure Receive Signal Strength 5. Conduct Polling Diagnostic. SWR Measurement. Maximum = 10% Reflected Power ESTeem command Radio ON command. To Antenna.

nellis
Download Presentation

Serial Products Troubleshooting

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Serial Products Troubleshooting

  2. Troubleshooting Steps 1. Verify RS-232 Communication 2. Verify ESTeem Commands 3. Test SWR 4. Measure Receive Signal Strength 5. Conduct Polling Diagnostic

  3. SWR Measurement • Maximum = 10% Reflected Power • ESTeem command • Radio ON command To Antenna Transceiver Directional Watt Meter

  4. Measuring Signal Strength • Received Signal Strength • This command will display a digital value of the received signal strength in micro-volts • Modem must have this function installed at factory • Must use HIGH sensitivity • RXS [ON/OFF] • The ESTeem will print digital values of the following • 0,3,6,10,20,35,50,75,100,200,400uV Levels • The modem will always print the lowest value

More Related