1 / 12

Selecting A Bridge For Epiphone And Other “Imports”

In addition to replacement bridges, other guitar parts to consider upgrading on your Epiphone or other imported guitar are here.<br><br>Read more u2013 https://faberusa.com/selecting-a-bridge-for-epiphone-and-other-imports/

nethanpaul
Download Presentation

Selecting A Bridge For Epiphone And Other “Imports”

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Selecting A Bridge For Epiphone And Other “Imports”

  2. How to select the correct BRIDGE for your Epiphone, Tokai, Ibanez, or other Imported Guitar

  3. Bridges While there are many different types of bridges used on imported guitars, such as separate bridge and stop tailpiece, separate bridge and trapeze tailpiece, wraparound (bridge and tailpiece as one unit), rosewood block, etc., the majority of guitars use a separate bridge and stop tailpiece, as used on most Les Pauls, 335s, etc. In this section, we will concentrate on that particular setup. There are only two types of bridge posts used on separate bridge and stop tailpiece equipped guitars. Use these images to determine what type you have. This is important to know so you can select the proper parts needed to install a Faber® ABRM or Tone-Lock™ bridge on your guitar.

  4. Note that “Direct Mounted Posts” use thin 4mm threaded posts mounted directly into the wood. Separate thumb wheels are used to raise or lower the bridge. “Bushing Mounted Posts,” on the other hand, have metal inserts mounted in the body into which integrated bridge post/thumb wheel height adjusters are used. Let’s discuss the parts available for each system.

  5. With this bridge system, bridge selection is fairly straightforward. The proper non locking bridge for these is the Faber® ABRM model. The ABRM is a direct drop on replacement. Likewise, the Faber® Tone-Lock™ bridge can be used directly. Direct Mounted Posts

  6. Selecting parts for “Bushing Mounted Posts” is a little more involved than with “Direct Mounted Posts,” because you will need to change the bridge posts in order to use the Faber® ABRM or Tone-Lock™ bridges. Luckily, Faber® provides two methods to accomplish this. Bushing Mounted Posts

  7. Faber® "Plus" E-Sert™ The “Plus” E-Sert is the best way to get enhanced tone and sustain from your imported guitar with Bushing Mounted Posts. An 8mm bolt is included in each kit to ease in the removal of the body bushings. Since the bottom of the bushings are hollow, screwing the bolt into the bushing will cause it to rise as the bottom of the bolt comes into contact with the body wood. We have a VIDEO showing how to install the E-Sert™. Note that the video is showing the installation of the Faber® iNsert for Gibson guitar bridge, but installing the E-Sert™ is the exact same procedure.

  8. Faber® “E-Z” ESWKIT™ The “E-Z” ESWKIT™ is a “no modification” solution. This steel kit simply replaces the existing and inferior “pot metal” posts. It will screw into the existing body bushings as it has the exact thread pattern of the original. While this in an improvement, is not the optimum, because the body bushings themselves are also pot metal which produce inferior tone. That is why it is always a good idea to replace the body bushings as well with a set of Faber® “TPM” Metric Bridge/Tailpiece Bushings.

  9. In addition to replacement bridges, other guitar parts to consider upgrading on your Epiphone or other imported guitar are:

  10. Tailpiece: our 100% lightweight aluminum TP-59 stop tailpiece – much lighter than the stock tailpiece and provides a more “woody” and vintage tone Tailpiece bushings: our metric Steel Bridge/Tailpiece Bushings provide much improved tone transfer over the stock “pot metal” bushings “Vintage Steel” tailpiece studs: our “Vintage Steel” Tailpiece Studs replace the standard tone robbing, non-locking tailpiece studs Tone-Lock™ tailpiece studs and spacers: our steel Tone-Lock™ Studs/Spacers not only provide the convenience of locking the tailpiece, also but provide enhanced sustain not available with any other locking system

  11. Tone-Lock™ Tailpiece KIT: The Tone-Lock™ KIT contains a TP-59 aluminum tailpiece and a pair of Tone-Lock™ studs/spacers at a discount over buying the parts separately. A Lock Nut and Stud tool is also included, which is used to tighten the tailpiece studs without marring the plating, as can happen when using a regular screwdriver. Tone-Lock™ MASTER KIT: The Tone-Lock™ Master Kit contains a Tone-Lock™ locking bridge, TP-59 aluminum tailpiece, and a pair of Tone-Lock™ studs/spacers, at a discount over buying the parts separately. The included Lock Nut and Stud tool is used to tighten the lock nuts for the Tone-Lock™ bridge and the tailpiece studs. You may also an optional order a pair of our steel bridge/tailpiece bushings with the Master Kit.

More Related